Bump versions/dates for release of 7.1.0alpha3

case 1 is already handled in the first lines of the for loop;
it would only be entered in the invalid case where the string
continues past the defined length (ch != 0 but length-- == 0).

case 2 and case 3 are redundant, since k >= j and later the
string is truncated to j characters anyway.

.gitignore

@@ -245,10 +245,6 @@ ext/reflection/spl.chm
 ext/simplexml/examples/security.new.xml
 ext/spl/examples/.htaccess
 ext/spl/examples/*.phps
-ext/sqlite/weztest.sqlite
-ext/sqlite/libsqlite/src/sqlite.h
-ext/sqlite/libsqlite/src/parse.out
-ext/sqlite/libsqlite/src/libsqlite.dsw
 ext/sqlite3/tests/phpsql*
 ext/sqlite3/tests/*.db
 ext/sqlite3/tests/*.tmp

CODING_STANDARDS

@@ -165,7 +165,7 @@ User Functions/Methods Naming Conventions
     'foobar'
     'foo_bar'
 
-Internal Function Naming Convensions
+Internal Function Naming Conventions
 ----------------------
 
 1.  Functions that are part of the external API should be named
@@ -178,7 +178,7 @@ Internal Function Naming Convensions
     Unexposed module function should be static and should not be defined in
     'php_modulename.h'.
 
-    static int php_session_destroy(TSRMLS_D)
+    static int php_session_destroy()
 
 2.  Main module source file must be named 'modulename.c'.
 

INSTALL

@@ -5,7 +5,6 @@ Installing PHP
 
      * General Installation Considerations
      * Installation on Unix systems
-          + Apache 1.3.x on Unix systems
           + Apache 2.x on Unix systems
           + Lighttpd 1.4 on Unix systems
           + Sun, iPlanet and Netscape servers on Sun Solaris
@@ -103,7 +102,6 @@ Installation on Unix systems
 
 Table of Contents
 
-     * Apache 1.3.x on Unix systems
      * Apache 2.x on Unix systems
      * Lighttpd 1.4 on Unix systems
      * Sun, iPlanet and Netscape servers on Sun Solaris
@@ -163,208 +161,6 @@ Table of Contents
    you can't figure out why, see the Problems section.
      __________________________________________________________________
 
-Apache 1.3.x on Unix systems
-
-   This  section  contains  notes and hints specific to Apache installs of
-   PHP on Unix platforms. We also have instructions and notes for Apache 2
-   on a separate page.
-
-   You  can select arguments to add to the configure on line 10 below from
-   the  list of core configure options and from extension specific options
-   described  at  the respective places in the manual. The version numbers
-   have  been  omitted here, to ensure the instructions are not incorrect.
-   You  will  need  to replace the 'xxx' here with the correct values from
-   your files.
-
-   Example #1 Installation Instructions (Apache Shared Module Version) for
-   PHP
-1.  gunzip apache_xxx.tar.gz
-2.  tar -xvf apache_xxx.tar
-3.  gunzip php-xxx.tar.gz
-4.  tar -xvf php-xxx.tar
-5.  cd apache_xxx
-6.  ./configure --prefix=/www --enable-module=so
-7.  make
-8.  make install
-9.  cd ../php-xxx
-
-10. Now, configure your PHP.  This is where you customize your PHP
-    with various options, like which extensions will be enabled.  Do a
-    ./configure --help for a list of available options.  In our example
-    we'll do a simple configure with Apache 1 and MySQL support.  Your
-    path to apxs may differ from our example.
-
-      ./configure --with-mysql --with-apxs=/www/bin/apxs
-
-11. make
-12. make install
-
-    If you decide to change your configure options after installation,
-    you only need to repeat the last three steps. You only need to
-    restart apache for the new module to take effect. A recompile of
-    Apache is not needed.
-
-    Note that unless told otherwise, 'make install' will also install PEAR,
-    various PHP tools such as phpize, install the PHP CLI, and more.
-
-13. Setup your php.ini file:
-
-      cp php.ini-development /usr/local/lib/php.ini
-
-    You may edit your .ini file to set PHP options.  If you prefer your
-    php.ini in another location, use --with-config-file-path=/some/path in
-    step 10.
-
-    If you instead choose php.ini-production, be certain to read the list
-    of changes within, as they affect how PHP behaves.
-
-14. Edit your httpd.conf to load the PHP module.  The path on the right hand
-    side of the LoadModule statement must point to the path of the PHP
-    module on your system.  The make install from above may have already
-    added this for you, but be sure to check.
-
-      LoadModule php7_module libexec/libphp7.so
-
-15. And in the AddModule section of httpd.conf, somewhere under the
-    ClearModuleList, add this:
-
-      AddModule mod_php7.c
-
-16. Tell Apache to parse certain extensions as PHP.  For example,
-    let's have Apache parse the .php extension as PHP.  You could
-    have any extension(s) parse as PHP by simply adding more, with
-    each separated by a space.  We'll add .phtml to demonstrate.
-
-      AddType application/x-httpd-php .php .phtml
-
-    It's also common to setup the .phps extension to show highlighted PHP
-    source, this can be done with:
-
-      AddType application/x-httpd-php-source .phps
-
-17. Use your normal procedure for starting the Apache server. (You must
-    stop and restart the server, not just cause the server to reload by
-    using a HUP or USR1 signal.)
-
-   Alternatively, to install PHP as a static object:
-
-   Example  #2  Installation  Instructions (Static Module Installation for
-   Apache) for PHP
-1.  gunzip -c apache_1.3.x.tar.gz | tar xf -
-2.  cd apache_1.3.x
-3.  ./configure
-4.  cd ..
-
-5.  gunzip -c php-5.x.y.tar.gz | tar xf -
-6.  cd php-5.x.y
-7.  ./configure --with-mysql --with-apache=../apache_1.3.x
-8.  make
-9.  make install
-
-10. cd ../apache_1.3.x
-
-11. ./configure --prefix=/www --activate-module=src/modules/php7/libphp7.a
-    (The above line is correct! Yes, we know libphp7.a does not exist at this
-    stage. It isn't supposed to. It will be created.)
-
-12. make
-    (you should now have an httpd binary which you can copy to your Apache bin d
-ir if
-    it is your first install then you need to "make install" as well)
-
-13. cd ../php-5.x.y
-14. cp php.ini-development /usr/local/lib/php.ini
-
-15. You can edit /usr/local/lib/php.ini file to set PHP options.
-    Edit your httpd.conf or srm.conf file and add:
-    AddType application/x-httpd-php .php
-
-   Depending  on  your  Apache  install  and  Unix variant, there are many
-   possible  ways  to  stop and restart the server. Below are some typical
-   lines   used  in  restarting  the  server,  for  different  apache/unix
-   installations.  You  should  replace  /path/to/  with the path to these
-   applications on your systems.
-
-   Example #3 Example commands for restarting Apache
-1. Several Linux and SysV variants:
-/etc/rc.d/init.d/httpd restart
-
-2. Using apachectl scripts:
-/path/to/apachectl stop
-/path/to/apachectl start
-
-3. httpdctl and httpsdctl (Using OpenSSL), similar to apachectl:
-/path/to/httpsdctl stop
-/path/to/httpsdctl start
-
-4. Using mod_ssl, or another SSL server, you may want to manually
-stop and start:
-/path/to/apachectl stop
-/path/to/apachectl startssl
-
-   The  locations of the apachectl and http(s)dctl binaries often vary. If
-   your  system  has locate or whereis or which commands, these can assist
-   you in finding your server control programs.
-
-   Different examples of compiling PHP for apache are as follows:
-./configure --with-apxs --with-pgsql
-
-   This will create a libphp7.so shared library that is loaded into Apache
-   using  a  LoadModule  line  in Apache's httpd.conf file. The PostgreSQL
-   support is embedded into this library.
-
-./configure --with-apxs --with-pgsql=shared
-
-   This  will  create  a libphp7.so shared library for Apache, but it will
-   also create a pgsql.so shared library that is loaded into PHP either by
-   using  the  extension  directive  in  php.ini  file  or  by  loading it
-   explicitly in a script using the dl() function.
-
-./configure --with-apache=/path/to/apache_source --with-pgsql
-
-   This  will  create  a  libmodphp7.a  library,  a  mod_php7.c  and  some
-   accompanying files and copy this into the src/modules/php7 directory in
-   the    Apache    source   tree.   Then   you   compile   Apache   using
-   --activate-module=src/modules/php7/libphp7.a   and   the  Apache  build
-   system  will  create  libphp7.a  and  link it statically into the httpd
-   binary.  The  PostgreSQL  support  is included directly into this httpd
-   binary, so the final result here is a single httpd binary that includes
-   all of Apache and all of PHP.
-
-./configure --with-apache=/path/to/apache_source --with-pgsql=shared
-
-   Same as before, except instead of including PostgreSQL support directly
-   into  the  final  httpd you will get a pgsql.so shared library that you
-   can load into PHP from either the php.ini file or directly using dl().
-
-   When  choosing  to build PHP in different ways, you should consider the
-   advantages  and  drawbacks  of each method. Building as a shared object
-   will  mean  that  you  can compile apache separately, and don't have to
-   recompile  everything  as you add to, or change, PHP. Building PHP into
-   apache  (static  method)  means  that PHP will load and run faster. For
-   more information, see the Apache » web page on DSO support.
-
-     Note:
-
-     Apache's  default  httpd.conf  currently  ships  with a section that
-     looks like this:
-
-User nobody
-Group "#-1"
-
-     Unless  you  change  that  to "Group nogroup" or something like that
-     ("Group  daemon"  is  also very common) PHP will not be able to open
-     files.
-
-     Note:
-
-     Make  sure  you  specify  the  installed  version of apxs when using
-     --with-apxs=/path/to/apxs  .  You must NOT use the apxs version that
-     is  in  the apache sources but the one that is actually installed on
-     your system.
-     __________________________________________________________________
-     __________________________________________________________________
-
 Apache 2.x on Unix systems
 
    This  section  contains notes and hints specific to Apache 2.x installs

LICENSE

@@ -1,6 +1,6 @@
 -------------------------------------------------------------------- 
                   The PHP License, version 3.01
-Copyright (c) 1999 - 2015 The PHP Group. All rights reserved.
+Copyright (c) 1999 - 2016 The PHP Group. All rights reserved.
 -------------------------------------------------------------------- 
 
 Redistribution and use in source and binary forms, with or without

Makefile.global

@@ -53,7 +53,7 @@ install-headers:
 			paths="$$paths $(INSTALL_ROOT)$(phpincludedir)/$$i"; \
 		done; \
 		$(mkinstalldirs) $$paths && \
-		echo "Installing header files:          $(INSTALL_ROOT)$(phpincludedir)/" && \
+		echo "Installing header files:           $(INSTALL_ROOT)$(phpincludedir)/" && \
 		for i in `echo $(INSTALL_HEADERS)`; do \
 			if test "$(PHP_PECL_EXTENSION)"; then \
 				src=`echo $$i | $(SED) -e "s#ext/$(PHP_PECL_EXTENSION)/##g"`; \

README.EXT_SKEL

@@ -172,7 +172,7 @@ PHP_FUNCTION(module_name_drawtext)
     zval *image = NULL;
     zval *font = NULL;
 
-    if (zend_parse_parameters(argc TSRMLS_CC, "rsrll|l", &image, &text, &text_len, &font, &x, &y, &color) == FAILURE)
+    if (zend_parse_parameters(argc, "rsrll|l", &image, &text, &text_len, &font, &x, &y, &color) == FAILURE)
         return;
 
     if (image) {

README.GIT-RULES

@@ -79,7 +79,7 @@ The next few rules are more of a technical nature::
       should be noted in both PHP-5.4/NEWS and PHP-5.5/NEWS but
       not master, which is not a public released version yet.
 
-   3. Do not commit multiple file and dump all messages in one commit. If you
+   3. Do not commit multiple files and dump all messages in one commit. If you
       modified several unrelated files, commit each group separately and
       provide a nice commit message for each one. See example below.
 

README.NEW-OUTPUT-API

@@ -8,98 +8,98 @@ API adjustment to the old output control code:
 
 	Checking output control layers status:
 		// Using OG()
-		php_output_get_status(TSRMLS_C);
+		php_output_get_status();
 
 	Starting the default output handler:
-		// php_start_ob_buffer(NULL, 0, 1 TSRMLS_CC);
-		php_output_start_default(TSRMLS_C);
+		// php_start_ob_buffer(NULL, 0, 1);
+		php_output_start_default();
 
 	Starting an user handler by zval:
-		// php_start_ob_buffer(zhandler, chunk_size, erase TSRMLS_CC);
-		php_output_start_user(zhandler, chunk_size, flags TSRMLS_CC);
+		// php_start_ob_buffer(zhandler, chunk_size, erase);
+		php_output_start_user(zhandler, chunk_size, flags);
 
 	Starting an internal handler whithout context:
-		// php_ob_set_internal_handler(my_php_output_handler_func_t, buffer_size, "output handler name", erase TSRMLS_CC);
-		php_output_start_internal(handler_name, handler_name_len, my_php_output_handler_func_t, chunk_size, flags TSRMLS_CC);
+		// php_ob_set_internal_handler(my_php_output_handler_func_t, buffer_size, "output handler name", erase);
+		php_output_start_internal(handler_name, handler_name_len, my_php_output_handler_func_t, chunk_size, flags);
 
 	Starting an internal handler with context:
 		// not possible with old API
 		php_output_handler *h;
-		h = php_output_handler_create_internal(handler_name, handler_name_len, my_php_output_handler_context_func_t, chunk_size, flags TSRMLS_CC);
+		h = php_output_handler_create_internal(handler_name, handler_name_len, my_php_output_handler_context_func_t, chunk_size, flags);
 		php_output_handler_set_context(h, my_context, my_context_dtor);
-		php_output_handler_start(h TSRMLS_CC);
+		php_output_handler_start(h);
 
 	Testing whether a certain output handler has already been started:
-		// php_ob_handler_used("output handler name" TSRMLS_CC);
-		php_output_handler_started(handler_name, handler_name_len TSRMLS_CC);
+		// php_ob_handler_used("output handler name");
+		php_output_handler_started(handler_name, handler_name_len);
 
 	Flushing one output buffer:
-		// php_end_ob_buffer(1, 1 TSRMLS_CC);
-		php_output_flush(TSRMLS_C);
+		// php_end_ob_buffer(1, 1);
+		php_output_flush();
 
 	Flushing all output buffers:
 		// not possible with old API
-		php_output_flush_all(TSRMLS_C);
+		php_output_flush_all();
 
 	Cleaning one output buffer:
-		// php_ob_end_buffer(0, 1 TSRMLS_CC);
-		php_output_clean(TSRMLS_C);
+		// php_ob_end_buffer(0, 1);
+		php_output_clean();
 
 	Cleaning all output buffers:
 		// not possible with old API
-		php_output_clean_all(TSRMLS_C);
+		php_output_clean_all();
 
 	Discarding one output buffer:
-		// php_ob_end_buffer(0, 0 TSRMLS_CC);
-		php_output_discard(TSRMLS_C);
+		// php_ob_end_buffer(0, 0);
+		php_output_discard();
 
 	Discarding all output buffers:
-		// php_ob_end_buffers(0 TSRMLS_CC);
-		php_output_discard_all(TSRMLS_C);
+		// php_ob_end_buffers(0);
+		php_output_discard_all();
 
 	Stopping (and dropping) one output buffer:
-		// php_ob_end_buffer(1, 0 TSRMLS_CC)
-		php_output_end(TSRMLS_C);
+		// php_ob_end_buffer(1, 0)
+		php_output_end();
 
 	Stopping (and dropping) all output buffers:
-		// php_ob_end_buffers(1, 0 TSRMLS_CC);
-		php_output_end_all(TSRMLS_C);
+		// php_ob_end_buffers(1, 0);
+		php_output_end_all();
 
 	Retrieving output buffers contents:
-		// php_ob_get_buffer(zstring TSRMLS_CC);
-		php_output_get_contents(zstring TSRMLS_CC);
+		// php_ob_get_buffer(zstring);
+		php_output_get_contents(zstring);
 
 	Retrieving output buffers length:
-		// php_ob_get_length(zlength TSRMLS_CC);
-		php_output_get_length(zlength TSRMLS_CC);
+		// php_ob_get_length(zlength);
+		php_output_get_length(zlength);
 
 	Retrieving output buffering level:
 		// OG(nesting_level);
-		php_output_get_level(TSRMLS_C);
+		php_output_get_level();
 
 	Issue a warning because of an output handler conflict:
-		// php_ob_init_conflict("to be started handler name", "to be tested if already started handler name" TSRMLS_CC);
-		php_output_handler_conflict(new_handler_name, new_handler_name_len, set_handler_name, set_handler_name_len TSRMLS_CC);
+		// php_ob_init_conflict("to be started handler name", "to be tested if already started handler name");
+		php_output_handler_conflict(new_handler_name, new_handler_name_len, set_handler_name, set_handler_name_len);
 
 	Registering a conflict checking function, which will be checked prior starting the handler:
 		// not possible with old API, unless hardcoding into output.c
-		php_output_handler_conflict_register(handler_name, handler_name_len, my_php_output_handler_conflict_check_t TSRMLS_CC);
+		php_output_handler_conflict_register(handler_name, handler_name_len, my_php_output_handler_conflict_check_t);
 
 	Registering a reverse conflict checking function, which will be checked prior starting the specified foreign handler:
 		// not possible with old API
-		php_output_handler_reverse_conflict_register(foreign_handler_name, foreign_handler_name_len, my_php_output_handler_conflict_check_t TSRMLS_CC);
+		php_output_handler_reverse_conflict_register(foreign_handler_name, foreign_handler_name_len, my_php_output_handler_conflict_check_t);
 
 	Facilitating a context from within an output handler callable with ob_start():
 		// not possible with old API
-		php_output_handler_hook(PHP_OUTPUT_HANDLER_HOOK_GET_OPAQ, (void *) &custom_ctx_ptr_ptr TSRMLS_CC);
+		php_output_handler_hook(PHP_OUTPUT_HANDLER_HOOK_GET_OPAQ, (void *) &custom_ctx_ptr_ptr);
 
 	Disabling of the output handler by itself:
 		//not possible with old API
-		php_output_handler_hook(PHP_OUTPUT_HANDLER_HOOK_DISABLE, NULL TSRMLS_CC);
+		php_output_handler_hook(PHP_OUTPUT_HANDLER_HOOK_DISABLE, NULL);
 
 	Marking an output handler immutable by itself because of irreversibility of its operation:
 		// not possible with old API
-		php_output_handler_hook(PHP_OUTPUT_HANDLER_HOOK_IMMUTABLE, NULL TSRMLS_CC);
+		php_output_handler_hook(PHP_OUTPUT_HANDLER_HOOK_IMMUTABLE, NULL);
 
 	Restarting the output handler because of a CLEAN operation:
 		// not possible with old API

README.PARAMETER_PARSING_API

@@ -13,8 +13,8 @@ meaningful error messages.
 Prototypes
 ----------
 /* Implemented. */
-int zend_parse_parameters(int num_args TSRMLS_DC, char *type_spec, ...);
-int zend_parse_parameters_ex(int flags, int num_args TSRMLS_DC, char *type_spec, ...);
+int zend_parse_parameters(int num_args, char *type_spec, ...);
+int zend_parse_parameters_ex(int flags, int num_args, char *type_spec, ...);
 
 The zend_parse_parameters() function takes the number of parameters
 passed to the extension function, the type specifier string, and the
@@ -30,7 +30,7 @@ resources cannot be auto-converted.
 
 PHP 5.5 includes a new function:
 
-int zend_parse_parameter(int flags, int arg_num TSRMLS_DC, zval **arg, const char *spec, ...);
+int zend_parse_parameter(int flags, int arg_num, zval **arg, const char *spec, ...);
 
 This function behaves like zend_parse_parameters_ex() except that instead of
 reading the arguments from the stack, it receives a single zval to convert
@@ -63,10 +63,10 @@ Type specifiers
  o  - object of any type (zval*)
  O  - object of specific type given by class entry (zval*, zend_class_entry)
  p  - valid path (string without null bytes in the middle) and its length (char*, size_t)
- P  - valid path (string without null bytes in the middle) as zend_string (zend_string)
+ P  - valid path (string without null bytes in the middle) as zend_string (zend_string*)
  r  - resource (zval*)
  s  - string (with possible null bytes) and its length (char*, size_t)
- S  - string (with possible null bytes) as zend_string (zend_string)
+ S  - string (with possible null bytes) as zend_string (zend_string*)
  z  - the actual zval (zval*)
  *  - variable arguments list (0 or more)
  +  - variable arguments list (1 or more)
@@ -97,11 +97,11 @@ Both mistakes might cause memory corruptions and segfaults:
 1)
   char *str;
   long str_len; /* XXX THIS IS WRONG!! Use size_t instead. */
-  zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s", &str, &str_len)
+  zend_parse_parameters(ZEND_NUM_ARGS(), "s", &str, &str_len)
 
 2)
   int num; /* XXX THIS IS WRONG!! Use zend_long instead. */
-  zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "l", &num)
+  zend_parse_parameters(ZEND_NUM_ARGS(), "l", &num)
 
 If you're in doubt, use check_parameters.php script to the parameters 
 and their types (it can be found in ./scripts/dev/ directory of PHP sources):
@@ -116,7 +116,7 @@ zend_long l;
 char *s;
 size_t s_len;
 zval *param;
-if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "lsz",
+if (zend_parse_parameters(ZEND_NUM_ARGS(), "lsz",
                           &l, &s, &s_len, &param) == FAILURE) {
     return;
 }
@@ -126,7 +126,7 @@ if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "lsz",
 zval *obj;
 double d = 0.5;
 zend_class_entry *my_ce;
-if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "O|d",
+if (zend_parse_parameters(ZEND_NUM_ARGS(), "O|d",
                           &obj, my_ce, &d) == FAILURE) {
     return;
 }
@@ -136,7 +136,7 @@ if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "O|d",
    If null is passed for object, obj will be set to NULL. */
 zval *obj;
 zval *arr;
-if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "o!a",
+if (zend_parse_parameters(ZEND_NUM_ARGS(), "o!a",
                           &obj, &arr) == FAILURE) {
     return;
 }
@@ -144,7 +144,7 @@ if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "o!a",
 
 /* Gets a separated array which can also be null. */
 zval *arr;
-if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "a/!",
+if (zend_parse_parameters(ZEND_NUM_ARGS(), "a/!",
                           &arr) == FAILURE) {
     return;
 }
@@ -161,10 +161,10 @@ char *s;
  */
 size_t length;
 
-if (zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC,
+if (zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS(),
                              "lll", &l1, &l2, &l3) == SUCCESS) {
     /* manipulate longs */
-} else if (zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC,
+} else if (zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS(),
                                     "s", &s, &length) == SUCCESS) {
     /* manipulate string */
 } else {
@@ -180,7 +180,7 @@ int i, num_varargs;
 zval *varargs = NULL;
 
 
-if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "*", &varargs, &num_varargs) == FAILURE) {
+if (zend_parse_parameters(ZEND_NUM_ARGS(), "*", &varargs, &num_varargs) == FAILURE) {
     return;
 }
 
@@ -200,7 +200,7 @@ size_t str_len;
 int i, num_varargs;
 zval *varargs = NULL;
 
-if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s+", &str, &str_len, &varargs, &num_varargs) == FAILURE) {
+if (zend_parse_parameters(ZEND_NUM_ARGS(), "s+", &str, &str_len, &varargs, &num_varargs) == FAILURE) {
     return;
 }
 
@@ -214,7 +214,7 @@ zval *array;
 int i, num_varargs;
 zval *varargs = NULL;
 
-if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "a*l", &array, &varargs, &num_varargs, &num) == FAILURE) {
+if (zend_parse_parameters(ZEND_NUM_ARGS(), "a*l", &array, &varargs, &num_varargs, &num) == FAILURE) {
     return;
 }
 

README.REDIST.BINS

@@ -5,17 +5,16 @@
 5. ext/standard crypt
 6. ext/standard crypt's blowfish implementation
 7. Sqlite/Sqlite3 ext/sqlite3 ext/sqlite
-8. ext/json/json_parser
-9. ext/standard/rand
-10. ext/standard/scanf
-11. ext/standard/strnatcmp.c
-12. ext/standard/uuencode
-13. libxmlrpc ext/xmlrpc
-14. libzip ext/zip
-15. main/snprintf.c
-16. main/strlcat
-17. main/strlcpy
-18. libgd see ext/gd/libgd/COPYING
+8. ext/standard/rand
+9. ext/standard/scanf
+10. ext/standard/strnatcmp.c
+11. ext/standard/uuencode
+12. libxmlrpc ext/xmlrpc
+13. libzip ext/zip
+14. main/snprintf.c
+15. main/strlcat
+16. main/strlcpy
+17. libgd see ext/gd/libgd/COPYING
 
 5. ext/standard crypt
 
@@ -104,31 +103,7 @@ a legal notice, here is a blessing:
   May you share freely, never taking more than you give.
 
 
-8. ext/json/json_parser
-Copyright (c) 2005 JSON.org
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-The Software shall be used for Good, not Evil.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-
-
-9. ext/standard/rand
+8. ext/standard/rand
 The following php_mt_...() functions are based on a C++ class MTRand by
 Richard J. Wagner. For more information see the web page at
 http://www-personal.engin.umich.edu/~wagnerr/MersenneTwister.html
@@ -181,7 +156,7 @@ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 
-10. ext/standard/scanf
+9. ext/standard/scanf
 scanf.c --
 
 This file contains the base code which implements sscanf and by extension
@@ -227,7 +202,7 @@ authors grant the U.S. Government and others acting in its behalf
 permission to use and distribute the software in accordance with the
 terms specified in this license.
 
-11. ext/standard/strnatcmp.c
+10. ext/standard/strnatcmp.c
 
 strnatcmp.c -- Perform 'natural order' comparisons of strings in C.
 Copyright (C) 2000 by Martin Pool <mbp@humbug.org.au>
@@ -248,7 +223,7 @@ freely, subject to the following restrictions:
 	 misrepresented as being the original software.
 3. This notice may not be removed or altered from any source distribution.
 
-12. ext/standard/uuencode
+11. ext/standard/uuencode
 Portions of this code are based on Berkeley's uuencode/uudecode
 implementation.
 
@@ -284,7 +259,7 @@ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 SUCH DAMAGE.
 
 
-13. libxmlrpc ext/xmlrpc
+12. libxmlrpc ext/xmlrpc
 
 Copyright 2000 Epinions, Inc. 
 
@@ -308,7 +283,7 @@ OF OR IN CONNECTION WITH THE SOFTWARE (HOWEVER ARISING, INCLUDING
 NEGLIGENCE), EVEN IF EPINIONS, INC.  IS AWARE OF THE POSSIBILITY OF SUCH 
 DAMAGES.
 
-14. libzip ext/zip
+13. libzip ext/zip
 zip.h -- exported declarations.
 Copyright (C) 1999-2009 Dieter Baron and Thomas Klausner
 
@@ -340,7 +315,7 @@ IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
 IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-15. main/snprintf.c
+14. main/snprintf.c
 Copyright (c) 2002, 2006 Todd C. Miller <Todd.Miller@courtesan.com>
 
 Permission to use, copy, modify, and distribute this software for any
@@ -413,8 +388,8 @@ This code is based on, and used with the permission of, the
 SIO stdio-replacement strx_* functions by Panos Tsirigotis
 <panos@alumni.cs.colorado.edu> for xinetd.
 
-16. main/strlcat
-17. main/strlcpy
+15. main/strlcat
+16. main/strlcpy
 Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
 All rights reserved.
 

README.RELEASE_PROCESS

@@ -17,7 +17,7 @@ It is recommended to do so a couple of days before the packaging day, to
 have enough time to investigate failures, communicate with the authors and
 commit the fixes.
 The RM for the branch is also responsible for keeping the CI green on
-ongoing bases between the releases. Check the CI status for your branch
+ongoing basis between the releases. Check the CI status for your branch
 periodically and resolve the failures ASAP. See more in:
 https://wiki.php.net/rfc/travis_ci
 
@@ -31,7 +31,7 @@ team (Bjori) on hand.
 
 6. Verify the tags to be extra sure everything was tagged properly.
 
-7. Moving extensions from/to PECL requires write acces to the destination.
+7. Moving extensions from/to PECL requires write access to the destination.
 Most developers should have this. 
 
 Moving extensions from php-src to PECL
@@ -271,8 +271,8 @@ to upgrade.
 10. Wait an hour or two, then send a mail to php-announce@lists.php.net,
 php-general@lists.php.net and internals@lists.php.net with a text similar to
 http://news.php.net/php.internals/17222.
-Please make sure that the mail to php-announce@ is its own completely seperate email.
-This is to make sure that repiles to the announcement on php-general@ or internals@
+Please make sure that the mail to php-announce@ is its own completely separate email.
+This is to make sure that replies to the announcement on php-general@ or internals@
 will not accidentally hit the php-announce@ mailinglist.
 
 Re-releasing the same version (or -pl)
@@ -309,6 +309,6 @@ to upgrade.
 5. Wait an hour or two, then send a mail to php-announce@lists.php.net,
 php-general@lists.php.net and internals@lists.php.net with a text similar to
 the news entry.
-Please make sure that the mail to php-announce@ is its own completely seperate email.
-This is to make sure that repiles to the announcement on php-general@ or internals@
+Please make sure that the mail to php-announce@ is its own completely separate email.
+This is to make sure that replies to the announcement on php-general@ or internals@
 will not accidentally hit the php-announce@ mailinglist.

README.STREAMS

@@ -28,7 +28,7 @@ The main functions are:
 PHPAPI size_t php_stream_read(php_stream * stream, char * buf, size_t count);
 PHPAPI size_t php_stream_write(php_stream * stream, const char * buf, size_t
         count);
-PHPAPI size_t php_stream_printf(php_stream * stream TSRMLS_DC, 
+PHPAPI size_t php_stream_printf(php_stream * stream, 
         const char * fmt, ...);
 PHPAPI int php_stream_eof(php_stream * stream);
 PHPAPI int php_stream_getc(php_stream * stream);
@@ -47,7 +47,7 @@ Opening Streams
 In most cases, you should use this API:
 
 PHPAPI php_stream *php_stream_open_wrapper(const char *path, const char *mode,
-    int options, char **opened_path TSRMLS_DC);
+    int options, char **opened_path);
 
 Where:
     path is the file or resource to open.
@@ -80,7 +80,7 @@ PHPAPI php_stream *php_stream_fopen_tmpfile(void);
     Open a FILE * with tmpfile() and convert into a stream.
 
 PHPAPI php_stream *php_stream_fopen_temporary_file(const char *dir,
-    const char *pfx, char **opened_path TSRMLS_DC);
+    const char *pfx, char **opened_path);
     Generate a temporary file name and open it.
 
 There are some network enabled relatives in php_network.h:

README.input_filter

@@ -138,7 +138,7 @@ SAPI_INPUT_FILTER_FUNC(my_sapi_input_filter)
     strcpy(raw_var, "RAW_");
     strlcat(raw_var,var,var_len+5);
 
-    php_register_variable_ex(raw_var, &new_var, array_ptr TSRMLS_DC);
+    php_register_variable_ex(raw_var, &new_var, array_ptr);
 
     php_strip_tags(*val, val_len, NULL, NULL, 0);
 
@@ -154,7 +154,7 @@ PHP_FUNCTION(my_get_raw)
     zval **tmp;
     zval *array_ptr = NULL;
 
-    if(zend_parse_parameters(2 TSRMLS_CC, "ls", &arg, &var, &var_len) == FAILURE) {
+    if(zend_parse_parameters(2, "ls", &arg, &var, &var_len) == FAILURE) {
         return;
     }
 

README.md

@@ -10,7 +10,7 @@ Pull Requests
 =============
 PHP accepts pull requests via github. Discussions are done on github, but
 depending on the topic can also be relayed to the official PHP developer
-mailinglist internals@lists.php.net.
+mailing list internals@lists.php.net.
 
 New features require an RFC and must be accepted by the developers.
 See https://wiki.php.net/rfc and https://wiki.php.net/rfc/voting for more

TSRM/TSRM.h

@@ -170,8 +170,8 @@ TSRM_API void *tsrm_get_ls_cache(void);
 
 #define TSRMG_STATIC(id, type, element)	(TSRMG_BULK_STATIC(id, type)->element)
 #define TSRMG_BULK_STATIC(id, type)	((type) (*((void ***) TSRMLS_CACHE))[TSRM_UNSHUFFLE_RSRC_ID(id)])
-#define TSRMLS_CACHE_EXTERN() extern TSRM_TLS void *TSRMLS_CACHE
-#define TSRMLS_CACHE_DEFINE() TSRM_TLS void *TSRMLS_CACHE = NULL
+#define TSRMLS_CACHE_EXTERN() extern TSRM_TLS void *TSRMLS_CACHE;
+#define TSRMLS_CACHE_DEFINE() TSRM_TLS void *TSRMLS_CACHE = NULL;
 #if ZEND_DEBUG
 #define TSRMLS_CACHE_UPDATE() TSRMLS_CACHE = tsrm_get_ls_cache()
 #else

TSRM/m4/gethostbyname.m4

@@ -0,0 +1,197 @@
+# =================================================================================
+#  http://www.gnu.org/software/autoconf-archive/ax_func_which_gethostbyname_r.html
+# =================================================================================
+#
+# SYNOPSIS
+#
+#   AX_FUNC_WHICH_GETHOSTBYNAME_R
+#
+# DESCRIPTION
+#
+#   Determines which historical variant of the gethostbyname_r() call
+#   (taking three, five, or six arguments) is available on the system and
+#   defines one of the following macros accordingly:
+#
+#     HAVE_FUNC_GETHOSTBYNAME_R_6
+#     HAVE_FUNC_GETHOSTBYNAME_R_5
+#     HAVE_FUNC_GETHOSTBYNAME_R_3
+#
+#   as well as
+#
+#     HAVE_GETHOSTBYNAME_R
+#
+#   If used in conjunction with gethostname.c, the API demonstrated in
+#   test.c can be used regardless of which gethostbyname_r() is available.
+#   These example files can be found at
+#   http://www.csn.ul.ie/~caolan/publink/gethostbyname_r
+#
+#   based on David Arnold's autoconf suggestion in the threads faq
+#
+#   Originally named "AC_caolan_FUNC_WHICH_GETHOSTBYNAME_R". Rewritten for
+#   Autoconf 2.5x, and updated for 2.68 by Daniel Richard G.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Caolan McNamara <caolan@skynet.ie>
+#   Copyright (c) 2008 Daniel Richard G. <skunk@iskunk.org>
+#
+#   This program is free software; you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation; either version 2 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 7
+
+AC_DEFUN([AX_FUNC_WHICH_GETHOSTBYNAME_R], [
+
+    AC_LANG_PUSH([C])
+    AC_MSG_CHECKING([how many arguments gethostbyname_r() takes])
+
+    AC_CACHE_VAL([ac_cv_func_which_gethostbyname_r], [
+
+################################################################
+
+ac_cv_func_which_gethostbyname_r=unknown
+
+#
+# ONE ARGUMENT (sanity check)
+#
+
+# This should fail, as there is no variant of gethostbyname_r() that takes
+# a single argument. If it actually compiles, then we can assume that
+# netdb.h is not declaring the function, and the compiler is thereby
+# assuming an implicit prototype. In which case, we're out of luck.
+#
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <netdb.h>],
+        [
+            char *name = "www.gnu.org";
+            (void)gethostbyname_r(name) /* ; */
+        ])],
+    [ac_cv_func_which_gethostbyname_r=no])
+
+#
+# SIX ARGUMENTS
+# (e.g. Linux)
+#
+
+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
+
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <netdb.h>],
+        [
+            char *name = "www.gnu.org";
+            struct hostent ret, *retp;
+            char buf@<:@1024@:>@;
+            int buflen = 1024;
+            int my_h_errno;
+            (void)gethostbyname_r(name, &ret, buf, buflen, &retp, &my_h_errno) /* ; */
+        ])],
+    [ac_cv_func_which_gethostbyname_r=six])
+
+fi
+
+#
+# FIVE ARGUMENTS
+# (e.g. Solaris)
+#
+
+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
+
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <netdb.h>],
+        [
+            char *name = "www.gnu.org";
+            struct hostent ret;
+            char buf@<:@1024@:>@;
+            int buflen = 1024;
+            int my_h_errno;
+            (void)gethostbyname_r(name, &ret, buf, buflen, &my_h_errno) /* ; */
+        ])],
+    [ac_cv_func_which_gethostbyname_r=five])
+
+fi
+
+#
+# THREE ARGUMENTS
+# (e.g. AIX, HP-UX, Tru64)
+#
+
+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
+
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <netdb.h>],
+        [
+            char *name = "www.gnu.org";
+            struct hostent ret;
+            struct hostent_data data;
+            (void)gethostbyname_r(name, &ret, &data) /* ; */
+        ])],
+    [ac_cv_func_which_gethostbyname_r=three])
+
+fi
+
+################################################################
+
+]) dnl end AC_CACHE_VAL
+
+case "$ac_cv_func_which_gethostbyname_r" in
+    three|five|six)
+    AC_DEFINE([HAVE_GETHOSTBYNAME_R], [1],
+              [Define to 1 if you have some form of gethostbyname_r().])
+    ;;
+esac
+
+case "$ac_cv_func_which_gethostbyname_r" in
+    three)
+    AC_MSG_RESULT([three])
+    AC_DEFINE([HAVE_FUNC_GETHOSTBYNAME_R_3], [1],
+              [Define to 1 if you have the three-argument form of gethostbyname_r().])
+    ;;
+
+    five)
+    AC_MSG_RESULT([five])
+    AC_DEFINE([HAVE_FUNC_GETHOSTBYNAME_R_5], [1],
+              [Define to 1 if you have the five-argument form of gethostbyname_r().])
+    ;;
+
+    six)
+    AC_MSG_RESULT([six])
+    AC_DEFINE([HAVE_FUNC_GETHOSTBYNAME_R_6], [1],
+              [Define to 1 if you have the six-argument form of gethostbyname_r().])
+    ;;
+
+    no)
+    AC_MSG_RESULT([cannot find function declaration in netdb.h])
+    ;;
+
+    unknown)
+    AC_MSG_RESULT([can't tell])
+    ;;
+
+    *)
+    AC_MSG_ERROR([internal error])
+    ;;
+esac
+
+AC_LANG_POP
+
+]) dnl end AC_DEFUN
+

TSRM/tsrm.m4

@@ -1,3 +1,4 @@
+m4_include([TSRM/m4/gethostbyname.m4])
 
 dnl TSRM_CHECK_GCC_ARG(ARG, ACTION-IF-FOUND, ACTION-IF-NOT_FOUND)	
 AC_DEFUN([TSRM_CHECK_GCC_ARG],[
@@ -32,6 +33,8 @@ AC_CHECK_HEADERS(stdarg.h)
 
 AC_CHECK_FUNCS(sigprocmask)
 
+AX_FUNC_WHICH_GETHOSTBYNAME_R()
+
 ])
 
 
@@ -89,7 +92,6 @@ else
 fi
 ])
 
-
 AC_DEFUN([TSRM_THREADS_CHECKS],[
 
 dnl For the thread implementations, we always use --with-*

TSRM/tsrm_config_common.h

@@ -42,7 +42,10 @@ char *alloca ();
 #endif
 
 #ifndef MAXPATHLEN
-# ifdef PATH_MAX
+# if _WIN32
+#  include "win32/ioutil.h"
+#  define MAXPATHLEN PHP_WIN32_IOUTIL_MAXPATHLEN
+# elif PATH_MAX
 #  define MAXPATHLEN PATH_MAX
 # elif defined(MAX_PATH)
 #  define MAXPATHLEN MAX_PATH

TSRM/tsrm_nw.c

@@ -2,7 +2,7 @@
    +----------------------------------------------------------------------+
    | PHP Version 7                                                        |
    +----------------------------------------------------------------------+
-   | Copyright (c) 1997-2015 The PHP Group                                |
+   | Copyright (c) 1997-2016 The PHP Group                                |
    +----------------------------------------------------------------------+
    | This source file is subject to version 3.01 of the PHP license,      |
    | that is bundled with this package in the file LICENSE, and is        |

TSRM/tsrm_nw.h

@@ -2,7 +2,7 @@
    +----------------------------------------------------------------------+
    | PHP Version 7                                                        |
    +----------------------------------------------------------------------+
-   | Copyright (c) 1997-2015 The PHP Group                                |
+   | Copyright (c) 1997-2016 The PHP Group                                |
    +----------------------------------------------------------------------+
    | This source file is subject to version 3.01 of the PHP license,      |
    | that is bundled with this package in the file LICENSE, and is        |

TSRM/tsrm_win32.c

@@ -2,7 +2,7 @@
    +----------------------------------------------------------------------+
    | PHP Version 7                                                        |
    +----------------------------------------------------------------------+
-   | Copyright (c) 1997-2015 The PHP Group                                |
+   | Copyright (c) 1997-2016 The PHP Group                                |
    +----------------------------------------------------------------------+
    | This source file is subject to version 3.01 of the PHP license,      |
    | that is bundled with this package in the file LICENSE, and is        |
@@ -33,6 +33,7 @@
 #include <Sddl.h>
 #include "tsrm_win32.h"
 #include "zend_virtual_cwd.h"
+#include "win32/ioutil.h"
 
 #ifdef ZTS
 static ts_rsrc_id win32_globals_id;
@@ -208,28 +209,42 @@ TSRM_API int tsrm_win32_access(const char *pathname, int mode)
 	BYTE * psec_desc = NULL;
 	BOOL fAccess = FALSE;
 
+	PHP_WIN32_IOUTIL_INIT_W(pathname)
+	if (!pathw) {
+		return -1;
+	}
+
 	realpath_cache_bucket * bucket = NULL;
 	char * real_path = NULL;
 
 	if (mode == 1 /*X_OK*/) {
 		DWORD type;
-		return GetBinaryType(pathname, &type) ? 0 : -1;
+		int ret;
+
+		ret = GetBinaryTypeW(pathw, &type) ? 0 : -1;
+
+		PHP_WIN32_IOUTIL_CLEANUP_W()
+
+		return ret;
 	} else {
 		if(!IS_ABSOLUTE_PATH(pathname, strlen(pathname)+1)) {
-			real_path = (char *)malloc(MAX_PATH);
+			real_path = (char *)malloc(MAXPATHLEN);
 			if(tsrm_realpath(pathname, real_path) == NULL) {
 				goto Finished;
 			}
 			pathname = real_path;
+			PHP_WIN32_IOUTIL_REINIT_W(pathname);
  		}
 
-		if(access(pathname, mode)) {
+		if(php_win32_ioutil_access(pathname, mode)) {
+			PHP_WIN32_IOUTIL_CLEANUP_W()
 			free(real_path);
 			return errno;
 		}
 
  		/* If only existence check is made, return now */
  		if (mode == 0) {
+			PHP_WIN32_IOUTIL_CLEANUP_W()
 			free(real_path);
 			return 0;
 		}
@@ -285,10 +300,11 @@ TSRM_API int tsrm_win32_access(const char *pathname, int mode)
 			if(bucket == NULL && real_path == NULL) {
 				/* We used the pathname directly. Call tsrm_realpath */
 				/* so that entry is created in realpath cache */
-				real_path = (char *)malloc(MAX_PATH);
+				real_path = (char *)malloc(MAXPATHLEN);
 				if(tsrm_realpath(pathname, real_path) != NULL) {
 					pathname = real_path;
 					bucket = realpath_cache_lookup(pathname, (int)strlen(pathname), t);
+					PHP_WIN32_IOUTIL_REINIT_W(pathname);
 				}
 			}
  		}
@@ -325,13 +341,13 @@ TSRM_API int tsrm_win32_access(const char *pathname, int mode)
 		}
 
 		/* Get size of security buffer. Call is expected to fail */
-		if(GetFileSecurity(pathname, sec_info, NULL, 0, &sec_desc_length)) {
+		if(GetFileSecurityW(pathw, sec_info, NULL, 0, &sec_desc_length)) {
 			goto Finished;
 		}
 
 		psec_desc = (BYTE *)malloc(sec_desc_length);
 		if(psec_desc == NULL ||
-			 !GetFileSecurity(pathname, sec_info, (PSECURITY_DESCRIPTOR)psec_desc, sec_desc_length, &sec_desc_length)) {
+			 !GetFileSecurityW(pathw, sec_info, (PSECURITY_DESCRIPTOR)psec_desc, sec_desc_length, &sec_desc_length)) {
 			goto Finished;
 		}
 
@@ -373,6 +389,7 @@ Finished:
 			real_path = NULL;
 		}
 
+		PHP_WIN32_IOUTIL_CLEANUP_W()
 		if(fAccess == FALSE) {
 			errno = EACCES;
 			return errno;
@@ -459,14 +476,15 @@ TSRM_API FILE *popen_ex(const char *command, const char *type, const char *cwd,
 {
 	FILE *stream = NULL;
 	int fno, type_len, read, mode;
-	STARTUPINFO startup;
+	STARTUPINFOW startup;
 	PROCESS_INFORMATION process;
 	SECURITY_ATTRIBUTES security;
 	HANDLE in, out;
 	DWORD dwCreateFlags = 0;
 	BOOL res;
 	process_pair *proc;
-	char *cmd;
+	char *cmd = NULL;
+	wchar_t *cmdw = NULL, *cwdw = NULL, *envw = NULL;
 	int i;
 	char *ptype = (char *)type;
 	HANDLE thread_token = NULL;
@@ -490,18 +508,42 @@ TSRM_API FILE *popen_ex(const char *command, const char *type, const char *cwd,
 		ptype++;
 	}
 
+	cmd = (char*)malloc(strlen(command)+strlen(TWG(comspec))+sizeof(" /c ")+2);
+	if (!cmd) {
+		return NULL;
+	}
+
+	sprintf(cmd, "%s /c \"%s\"", TWG(comspec), command);
+	cmdw = php_win32_cp_any_to_w(cmd);
+	if (!cmdw) {
+		free(cmd);
+		return NULL;
+	}
+
+	if (cwd) {
+		cwdw = php_win32_ioutil_any_to_w(cwd);
+		if (!cwdw) {
+			free(cmd);
+			free(cmdw);
+			return NULL;
+		}
+	}
+
 	security.nLength				= sizeof(SECURITY_ATTRIBUTES);
 	security.bInheritHandle			= TRUE;
 	security.lpSecurityDescriptor	= NULL;
 
 	if (!type_len || !CreatePipe(&in, &out, &security, 2048L)) {
+		free(cmdw);
+		free(cwdw);
+		free(cmd);
 		return NULL;
 	}
 
-	memset(&startup, 0, sizeof(STARTUPINFO));
+	memset(&startup, 0, sizeof(STARTUPINFOW));
 	memset(&process, 0, sizeof(PROCESS_INFORMATION));
 
-	startup.cb			= sizeof(STARTUPINFO);
+	startup.cb			= sizeof(STARTUPINFOW);
 	startup.dwFlags		= STARTF_USESTDHANDLES;
 	startup.hStdError	= GetStdHandle(STD_ERROR_HANDLE);
 
@@ -533,19 +575,28 @@ TSRM_API FILE *popen_ex(const char *command, const char *type, const char *cwd,
 		}
 	}
 
-	cmd = (char*)malloc(strlen(command)+strlen(TWG(comspec))+sizeof(" /c ")+2);
-	if (!cmd) {
-		return NULL;
+	envw = php_win32_cp_env_any_to_w(env);
+	if (envw) {
+		dwCreateFlags |= CREATE_UNICODE_ENVIRONMENT;
+	} else {
+		if (env) {
+			free(cmd);
+			free(cmdw);
+			free(cwdw);
+			return NULL;
+		}
 	}
 
-	sprintf(cmd, "%s /c \"%s\"", TWG(comspec), command);
 	if (asuser) {
-		res = CreateProcessAsUser(token_user, NULL, cmd, &security, &security, security.bInheritHandle, dwCreateFlags, env, cwd, &startup, &process);
+		res = CreateProcessAsUserW(token_user, NULL, cmdw, &security, &security, security.bInheritHandle, dwCreateFlags, envw, cwdw, &startup, &process);
 		CloseHandle(token_user);
 	} else {
-		res = CreateProcess(NULL, cmd, &security, &security, security.bInheritHandle, dwCreateFlags, env, cwd, &startup, &process);
+		res = CreateProcessW(NULL, cmdw, &security, &security, security.bInheritHandle, dwCreateFlags, envw, cwdw, &startup, &process);
 	}
 	free(cmd);
+	free(cmdw);
+	free(cwdw);
+	free(envw);
 
 	if (!res) {
 		return NULL;
@@ -749,10 +800,17 @@ TSRM_API int win32_utime(const char *filename, struct utimbuf *buf) /* {{{ */
 {
 	FILETIME mtime, atime;
 	HANDLE hFile;
+	PHP_WIN32_IOUTIL_INIT_W(filename)
 
-	hFile = CreateFile(filename, GENERIC_WRITE, FILE_SHARE_WRITE|FILE_SHARE_READ, NULL,
+	if (!pathw) {
+		return -1;
+	}
+
+	hFile = CreateFileW(pathw, GENERIC_WRITE, FILE_SHARE_WRITE|FILE_SHARE_READ, NULL,
 				 OPEN_ALWAYS, FILE_FLAG_BACKUP_SEMANTICS, NULL);
 
+	PHP_WIN32_IOUTIL_CLEANUP_W()
+
 	/* OPEN_ALWAYS mode sets the last error to ERROR_ALREADY_EXISTS but
 	   the CreateFile operation succeeds */
 	if (GetLastError() == ERROR_ALREADY_EXISTS) {

TSRM/tsrm_win32.h

@@ -2,7 +2,7 @@
    +----------------------------------------------------------------------+
    | PHP Version 7                                                        |
    +----------------------------------------------------------------------+
-   | Copyright (c) 1997-2015 The PHP Group                                |
+   | Copyright (c) 1997-2016 The PHP Group                                |
    +----------------------------------------------------------------------+
    | This source file is subject to version 3.01 of the PHP license,      |
    | that is bundled with this package in the file LICENSE, and is        |
@@ -72,7 +72,7 @@ typedef struct {
 
 #ifdef ZTS
 # define TWG(v) TSRMG_STATIC(win32_globals_id, tsrm_win32_globals *, v)
-TSRMLS_CACHE_EXTERN();
+TSRMLS_CACHE_EXTERN()
 #else
 # define TWG(v) (win32_globals.v)
 #endif

UPGRADING.INTERNALS

@@ -1,25 +1,9 @@
-PHP 7.0 INTERNALS UPGRADE NOTES
+PHP 7.1 INTERNALS UPGRADE NOTES
 
 0. Wiki Examples
 1. Internal API changes
-  e. New data types
-  f. zend_parse_parameters() specs
-  g. sprintf() formats
-  h. HashTable API
-  i. New portable macros for large file support
-  j. New portable macros for integers
-  k. get_class_entry object handler info
-  l. get_class_name object handler info
-  m. Other portable macros info
-  n. ZEND_ENGINE_2 removal
-  o. Updated final class modifier
-  p. TSRM changes
-  q. gc_collect_cycles() is now hookable
-  r. PDO uses size_t for lengths
-  s. Resource API changes
-  t. Optimized strings concatenation.
-  u. Streams changes
-  v. Sort algorithm changes
+  e. Codepage handling on Windows
+  f. Path handling on Windows
 
 2. Build system changes
   a. Unix build system changes
@@ -39,218 +23,50 @@ changes. See: https://wiki.php.net/phpng-upgrading
 1. Internal API changes
 ========================
 
-  e. New data types
-
-     String
-
-        Besides the old way of accepting the strings with 's', the new 'S' ZPP spec
-	was introduced. It expects an argument of the type zend_string *. String lengths
-	in it are bound to the size_t datatype.
-
-     Integer types
-
-	Integers do no more depend on the firm 'long' type. Instead a platform
-	dependent integer type is used, it is called zend_long. That datatype is
-	defined dynamically to guarantee the consistent 64 bit support. The zval 
-	field representing user land integer it bound to zend_long.
-
-	Signed integer is defined as zend_long, unsigned integer as zend_ulong
-	inside Zend. 
-
-     Other datatypes
-
-	zend_off_t  - portable off_t analogue
-	zend_stat_t - portable 'struct stat' analogue
-
-	These datatypes are declared to be portable across platforms. Thus, direct
-	usage of the functions like fseek, stat, etc. as well as direct usage of
-	off_t and struct stat is strongly not recommended. Instead the portable
-	macros should be used.
-
-	zend_fseek - portable fseek equivalent
-	zend_ftell - portable ftell equivalent
-	zend_lseek - portable lseek equivalent
-	zend_fstat - portable fstat equivalent
-	zend_stat  - portable stat equivalent
-
-  f. zend_parse_parameters() specs
-
-       The new spec 'S' introduced, which expects an argument of type zend_string *.
-       The 'l' spec expects a parameter of the type zend_long, not long anymore.
-       The 's' spec expects parameters of the type char * and size_t, no int anymore.
-
-  g. sprintf() formats
-
-       New printf modifier 'p' was implemented to platform independently output zend_long,
-       zend_ulong and php_size_t datatypes. That modifier can be used with 'd', 'u', 'x' and 'o'
-       printf format specs with spprintf, snprintf and the wrapping printf implementations.
-       %pu is sufficient for both zend_ulong and php_size_t. the code using %p spec to output
-       pointer address might need to be enclosed into #ifdef when it unlickily followed by 'd',
-       'u', 'x' or 'o'.
-
-       The only exceptions are the snprintf and zend_sprintf functions yet, because in some cases
-       they can use the implemenations available on the system, not the PHP one. With snprintf the
-       macros ZEND_LONG_FMT and ZEND_ULONG_FMT should be used.
-
-  h. HashTable API
-
-       Datatype for array indexes was changed to zend_ulong, for string keys to zend_string *.
-
-  i. New portable macros for large file support
-
-      Function(s)       Alias           Comment
-      stat, _stat64     zend_stat   for use with zend_stat_t
-      fstat, _fstat64   zend_fstat  for use with zend_stat_t
-      lseek, _lseeki64  zend_lseek  for use with zend_off_t
-      ftell, _ftelli64  zend_ftell  for use with zend_off_t
-      fseek, _fseeki64  zend_fseek  for use with zend_off_t
-
-  j. New portable macros for integers
-
-      Function(s)                                         Alias             Comment
-      snprintf with "%ld" or "%lld", _ltoa_s, _i64toa_s   ZEND_LTOA         for use with zend_long
-      atol, atoll, _atoi64                                ZEND_ATOL         for use with zend_long
-      strtol, strtoll, _strtoi64                          ZEND_STRTOL       for use with zend_long
-      strtoul, strtoull, _strtoui64                       ZEND_STRTOUL      for use with zend_long
-      abs, llabs, _abs64                                  ZEND_ABS          for use with zend_long
-      -                                                   ZEND_LONG_MAX     replaces LONG_MAX where appropriate
-      -                                                   ZEND_LONG_MIN     replaces LONG_MIN where appropriate
-      -                                                   ZEND_ULONG_MAX    replaces ULONG_MAX where appropriate
-      -                                                   SIZEOF_ZEND_LONG  reworked SIZEOF_ZEND_LONG representing the size of zend_long datatype
-      -                                                   ZEND_SIZE_MAX     Max value of size_t
-      -                                                   Z_L               casts an integral constant to zend_long
-      -                                                   Z_UL              casts an integral constant to zend_ulong
-
-      The macro ZEND_ENABLE_ZVAL_LONG64 reveals whether zval operates on 64 or 32 bit integer.
-
-  k. The get_class_entry object handler is no longer available. Instead
-     zend_object.ce is always used.
-
-  l. The get_class_name object handler is now only used for displaying class
-     names in debugging functions like var_dump(). It is no longer used in
-     get_class(), get_parent_class() or similar.
-
-     The handler is now obligatory, no longer accepts a `parent` argument and
-     must return a non-NULL zend_string*, which will be released by the caller.
-
-  m. Other portable macros info
-
-     ZEND_SECURE_ZERO     - zeroes chunk of memory
-     ZEND_VALID_SOCKET    - validates a php_socket_t variable 
-
-     ZEND_FASTCALL is defined to use __vectorcall convention on VS2013 and above
-     ZEND_NORETURN is defined as __declspec(noreturn) on VS
-
-  n. The ZEND_ENGINE_2 macro has been removed. A ZEND_ENGINE_3 macro has been added.
-  
-  o. Removed ZEND_ACC_FINAL_CLASS in favour of ZEND_ACC_FINAL, turning final class
-     modifier now a different class entry flag. Update your extensions.
-
-  p. TSRM changes
-
-     The TSRM layer undergone significant changes. It is not necessary anymore to 
-     pass the tsrm_ls pointer explicitly. The TSRMLS_* macros should not be used
-     in any new developments.
-
-     The recommended way accessing globals in TS builds is by implementing it
-     to use a local thread unique pointer to the corresponding data pool. These
-     are the new macros that serve to achieve this goal:
-
-     - ZEND_TSRMG - based on TSRMG and if static pointer for data pool access is
-       implemented, will use it
-     - ZEND_TSRMLS_CACHE_EXTERN - to be used in a header shared across multiple
-       C/C++ files
-     - ZEND_TSRMLS_CACHE_DEFINE - to be used in the main extension C/C++ file
-     - ZEND_TSRMLS_CACHE_UPDATE - to be integrated at the top of the globals
-       ctor or RINIT function
-     - ZEND_ENABLE_STATIC_TSRMLS_CACHE - to be used in the config.[m4|w32] for
-       enabling the globals access per thread unique pointer
-     - TSRMLS_CACHE - expands to the variable name which links to the thread
-       unique data pool
-
-     Note that usually it will work without implementing the globals access per
-     a thread unique pointer, however it might cause a slowdown. The reason is
-     that the access model to the extension/SAPI own globals as well as the
-     access to the core globals is determined in the compilation phase depending
-     on whether ZEND_ENABLE_STATIC_TSRMLS_CACHE macro is defined. 
-
-     Due to the current compiler evolution state, the TSRMLS_CACHE pointer
-     (when implemented) has to be present and updated in every binary unit which
-     is not compiled statically into PHP. So any DLL, DSO, EXE, etc. has to take
-     care about defining and updating it's TSRMLS cache. An update should happen
-     before any globals was accessed.
-
-     Porting an extension or SAPI is usually as easy as removing all the TSRMLS_*
-     occurrences and integrating the macros mentioned above. However if tsrm_ls
-     is used explicitly, its usage can be considered obsolete in most cases.
-     Additionally, if an extension triggers its own threads, TSRMLS_CACHE shouldn't
-     be passed to that threads directly.
-
-     When working with CTOR/DTOR for the extension globals, only the data passed
-     as parameters should be touched. For example, don't use code like
-     free(MYEXT_G(vars)); inside globals destructor, as it possibly can destroy
-     the data from a wrong thread. Instead use the pointer to the data delivered
-     into the destructor. So the previous example could look like
-     free(my_struct->vars); given the income was casted to (struct my_struct *).
-
-     A new macro was introduced to simplify the declaration to the extension
-     globals. A simplified declaration looks as follows
-
-     #define MYEXT_G(v) ZEND_MODULE_GLOBALS_ACCESSOR(myext, v)
-
-     Another new macro ZEND_MODULE_GLOBALS_BULK(myext) delivers the corresponding
-     globals struct as a whole.
-
-     Two new storage specifiers was introduced.
-
-     ZEND_EXT_TLS - expand to an appropriate thread specific storage specifier in
-                    the thread safe build, expands to empty in a non thread safe
-		    build. 
-     ZEND_TLS     - expands to an appropriate thread specific storage specifier
-                    with static visibility in the thread safe build, expands to
-                    static specifier in a non thread safe build. 
+  e. Codepage handling on Windows
      
-     Variables declared with these storage specifiers can not be shared across 
-     threads. While ZEND_TLS enforces the local scope visibility, ZEND_EXT_TLS
-     pertains to the visiblity across several compilation units. In both cases,
-     there's no portable way to achieve the visibility across shared objects.
-     Thus, these specifiers are not compatible with ZEND_API and PHPAPI specifiers.
+    A set of new APIs was introduced, which allows to handle codepage
+    conversions. The corresponding prototypes and macros are contained
+    in win32/codepage.h.
 
-  q. gc_collect_cycles() is now a function pointer, and can be replaced in the
-     same manner as zend_execute_ex() if needed (for example, to include the
-     time spent in the garbage collector in a profiler). The default
-     implementation has been renamed to zend_gc_collect_cycles(), and is
-     exported with ZEND_API.
+    Functions with php_win32_cp_* signatures provide handling for various
+    codepage aspects. Primarily they are in use at various places in the
+    I/O utils code and directly in the core where necessary, providing
+    conversions to/from UTF-16. Arbitrary conversions between codepages
+    are possible as well, whereby UTF-16 will be always an intermediate
+    state in this case.
 
-  r. In accordance with general use of size_t as string length, all PDO API
-     functions now use size_t for string length.
+    For input length arguments, the macro PHP_WIN32_CP_IGNORE_LEN can be
+    passed, then the API will calculate the length.  For output length
+    arguments, the macro PHP_WIN32_CP_IGNORE_LEN_P can be passed, then
+    the API won't set the output length.
 
-  s. Removed ZEND_REGISTER/FETCH_RESOURCE, use zend_fetch_resource and
-     and zend_register_resource instead, zend_fetch_resource accepts a zend_resource *
-     as first argument, if you still need to fetch a resource from zval, use 
-     zend_fetch_resource_ex. More details can be found in Zend/zend_list.c.
+    The mapping between encodings and codepages is provided by the predefined
+    array of data contained in win32/cp_enc_map.c. To change the data,
+    a generator win32/cp_enc_map_gen.c needs to be edited and run.
 
-  t. Optimized strings concatenation.
-     ZEND_ADD_STRING/VAR/CHAR are replaced with ZEND_ROPE_INIT, ZEND_ROPE_ADD,
-     ZEND_ROPE_END.
-     Instead of reallocation and copying string on each ZEND_ADD_STRING/VAR/CAHR,
-     collect all the strings and then allocate and construct the resulting string once.
+  f. Path handling on Windows
 
-  u. Streams changes
-     - It is possible to do blocking reads on Windows pipes. It can be done either
-       using context stream option PHP_STREAM_OPTION_PIPE_BLOCKING or 
-       adding STREAM_USE_BLOCKING_PIPE when opening the stream.
+    A set of new APIs was introduced, which allows to handle UTF-8 paths. The
+    corresponding prototypes and macros are contained in win32/ioutil.h.
 
-  v. Sort algorithm changes
-     - Improved zend_qsort(using hybrid sorting algo) for better performance,
-       and also renamed zend_qsort to zend_sort.
-     - Added stable sorting algo zend_insert_sort.
+    Functions with php_win32_ioutil_* signatures provide POSIX I/O analogues.
+    These functions are integrated in various places across the code base to
+    support Unicode filenames. While accepting char * arguments, internally 
+    the conversion to wchar_t * happens. Internally almost no ANSI APIs are
+    used, but directly their wide equivalents. The string conversion rules
+    correspond to those already present in the core and depend on the current
+    encoding settings. Doing so allows to move away from the ANSI Windows API
+    with its dependency on the system OEM/ANSI codepage.
+
+    Thanks to the wide API usage, the long paths are now supported as well. The
+    PHP_WIN32_IOUTIL_MAXPATHLEN macro is defined to 2048 bytes and will override
+    the MAXPATHLEN in files where the header is included.
+
+    The most optimal use case for scripts is utilizing UTF-8 for any I/O
+    related functions. UTF-8 filenames are supported on any system disregarding
+    the system OEM/ANSI codepage.
 
-  w. Tick functions internal API change
-     Tick functions have different declaration now. They expect a single
-	 parameter while before they were parameterless. When registering the
-	 tick function a value for this parameter must be passed. This value will be
-	 provided to the tick function on every execution.
 
 ========================
 2. Build system changes
@@ -260,65 +76,7 @@ changes. See: https://wiki.php.net/phpng-upgrading
 
   b. Windows build system changes
 
-     - Besides Visual Studio, building with Clang or Intel Composer is now
-       possible. To enable an alternative toolset, add the option
-       --with-toolset=[vs,clang,icc] to the configure line. The default
-       toolset is vs. Still clang or icc need the correct environment
-       which involves many tools from the vs toolset.
-
-       The toolset option is supported by phpize as well.
-
-       AWARENESS The only recommended and supported toolset to produce production
-       ready binaries is Visual Studio. Still other compilers can be used now for
-       testing and analyzing purposes.
-
-     - configure.js now produces response files which are passed to the linker
-       and library manager. This solves the issues with the long command lines
-       which can exceed the OS limit.
-
-     - with clang toolset, an option --with-uncritical-warn-choke is available,
-       which suppresses the most frequent false positive warnings
-
-     - the --with-mp option will by default utilize all the available cores. It's
-       enabled by default for release builds and can be disabled with the special
-       "disable" keyword.
-
 ========================
 3. Module changes
 ========================
 
-  Session:
-
-    - PS_MOD_UPDATE_TIMESTAMP() session save handler definition is added. New
-      save handler should use PS_MOD_UPDATE_TIMESTAMP() definition. Save handler
-      must not refer/change PS() variables directly from save handler. Use
-      parameters.
-    - PS_MOD()/PS_MOD_SID() macro exist only for transition. Beware these
-      save handlers are less secure and slower than PS_MOD_UPDATE_TIMESTAMP().
-    - PS(invalid_session_id) was removed. It was never worked as it supposed.
-      To report invalid session ID, use PS_VALIDATE_SID() handler.
-    - PS_VALIDATE_SID() defines session ID validation handler. This handler
-      must validate if requested session ID exists in session data storage or not.
-      Do not access PS(id) directly, but use this handler and it's parameter.
-    - PS_UPDATE_TIMESTAMP() defines timestamp updating handler. This handler
-      must update session data timestamp for GC if it is needed. e.g. Memcache
-      updates timestamp on read, so it does not need to update timestamp. Return
-      SUCCESS simply for this case.
-    - PS_CREATE_SID() should check session ID collision. Return NULL for failure.
-    - More documentation can be found in ext/session/mod_files.c as comments.
-      mod_files.c may be used as reference implementation.
- 
-  Openssl:
-    - several ext/openssl functions require the inclusion of the applink shim
-      as documented in the OpenSSL FAQ https://www.openssl.org/support/faq.html#PROG2
-      to properly work on Windows. While this primarily affects the OpenSSL
-      functionality, the shim needs to be included into the executable file
-      which loads the extension DLL, not into the extension DLL itself. Alternatively
-      it can be compiled and linked with the main program as a separate object file.
-      More information and explanation in the linked OpenSSL FAQ.
-
-      Thus, this primarily affects any WAMP or other redistributions bundling the
-      official PHP release zipballs or building from sources. The applink shim is
-      already integrated with all the PHP executables from the official distribution
-      starting with 7.0.0beta1.
-

Zend/Zend.m4

@@ -370,10 +370,10 @@ AC_CHECK_FUNCS(mremap)
 
 
 AC_ARG_ENABLE(zend-signals,
-[  --enable-zend-signals   Use zend signal handling],[
+[  --disable-zend-signals  whether to enable zend signal handling],[
   ZEND_SIGNALS=$enableval
 ],[
-  ZEND_SIGNALS=no
+  ZEND_SIGNALS=yes
 ])  
 
 AC_CHECK_FUNC(sigaction, [

Zend/tests/001.phpt

@@ -17,11 +17,20 @@ function test3($a, $b) {
 
 test1();
 test2(1);
-test2();
+try {
+	test2();
+} catch (Throwable $e) {
+	echo "Exception: " . $e->getMessage() . "\n";
+}
+
 test3(1,2);
 
 call_user_func("test1");
-call_user_func("test3", 1);
+try {
+	call_user_func("test3", 1);
+} catch (Throwable $e) {
+	echo "Exception: " . $e->getMessage() . "\n";
+}
 call_user_func("test3", 1, 2);
 
 class test {
@@ -38,14 +47,10 @@ echo "Done\n";
 --EXPECTF--	
 int(0)
 int(1)
-
-Warning: Missing argument 1 for test2(), called in %s on line %d
-int(0)
+Exception: Too few arguments to function test2(), 0 passed in %s001.php on line 18 and exactly 1 expected
 int(2)
 int(0)
-
-Warning: Missing argument 2 for test3()%s
-int(1)
+Exception: Too few arguments to function test3(), 1 passed in %s001.php on line 27 and exactly 2 expected
 int(2)
 int(1)
 

Zend/tests/002.phpt

@@ -23,11 +23,19 @@ function test3($a, $b) {
 test1();
 test1(10);
 test2(1);
-test2();
+try {
+	test2();
+} catch (Throwable $e) {
+	echo "Exception: " . $e->getMessage() . "\n";
+}
 test3(1,2);
 
 call_user_func("test1");
-call_user_func("test3", 1);
+try {
+	call_user_func("test3", 1);
+} catch (Throwable $e) {
+	echo "Exception: " . $e->getMessage() . "\n";
+}
 call_user_func("test3", 1, 2);
 
 class test {
@@ -62,14 +70,7 @@ int(1)
 
 Warning: func_get_arg():  Argument 1 not passed to function in %s on line %d
 bool(false)
-
-Warning: Missing argument 1 for test2(), called in %s on line %d and defined in %s on line %d
-
-Warning: func_get_arg():  Argument 0 not passed to function in %s on line %d
-bool(false)
-
-Warning: func_get_arg():  Argument 1 not passed to function in %s on line %d
-bool(false)
+Exception: Too few arguments to function test2(), 0 passed in %s002.php on line %d and exactly 1 expected
 int(1)
 int(2)
 
@@ -84,15 +85,7 @@ bool(false)
 
 Warning: func_get_arg():  Argument 1 not passed to function in %s on line %d
 bool(false)
-
-Warning: Missing argument 2 for test3()%s
-int(1)
-
-Warning: func_get_arg():  Argument 1 not passed to function in %s on line %d
-bool(false)
-
-Warning: func_get_arg():  Argument 2 not passed to function in %s on line %d
-bool(false)
+Exception: Too few arguments to function test3(), 1 passed in %s002.php on line %d and exactly 2 expected
 int(1)
 int(2)
 

Zend/tests/003.phpt

@@ -18,11 +18,19 @@ function test3($a, $b) {
 test1();
 test1(10);
 test2(1);
-test2();
+try {
+	test2();
+} catch (Throwable $e) {
+	echo "Exception: " . $e->getMessage() . "\n";
+}
 test3(1,2);
 
 call_user_func("test1");
-call_user_func("test3", 1);
+try {
+	call_user_func("test3", 1);
+} catch (Throwable $e) {
+	echo "Exception: " . $e->getMessage() . "\n";
+}
 call_user_func("test3", 1, 2);
 
 class test {
@@ -47,10 +55,7 @@ array(1) {
   [0]=>
   int(1)
 }
-
-Warning: Missing argument 1 for test2(), called in %s on line %d and defined in %s on line %d
-array(0) {
-}
+Exception: Too few arguments to function test2(), 0 passed in %s003.php on line %d and exactly 1 expected
 array(2) {
   [0]=>
   int(1)
@@ -59,12 +64,7 @@ array(2) {
 }
 array(0) {
 }
-
-Warning: Missing argument 2 for test3()%s
-array(1) {
-  [0]=>
-  int(1)
-}
+Exception: Too few arguments to function test3(), 1 passed in %s003.php on line %d and exactly 2 expected
 array(2) {
   [0]=>
   int(1)

Zend/tests/030.phpt

@@ -31,40 +31,4 @@ $test->bar();
 
 ?>
 --EXPECTF--
-object(Exception)#%d (7) {
-  ["message":protected]=>
-  string(3) "foo"
-  ["string":"Exception":private]=>
-  string(0) ""
-  ["code":protected]=>
-  int(0)
-  ["file":protected]=>
-  string(%d) "%s030.php"
-  ["line":protected]=>
-  int(%d)
-  ["trace":"Exception":private]=>
-  array(1) {
-    [0]=>
-    array(6) {
-      ["file"]=>
-      string(%d) "%s030.php"
-      ["line"]=>
-      int(%d)
-      ["function"]=>
-      string(3) "bar"
-      ["class"]=>
-      string(3) "foo"
-      ["type"]=>
-      string(2) "->"
-      ["args"]=>
-      array(0) {
-      }
-    }
-  }
-  ["previous":"Exception":private]=>
-  NULL
-}
-'test' => '0'
-'test_2' => '1'
-'test_3' => '2'
-ok
+Fatal error: Cannot re-assign $this in %s030.php on line 11

Zend/tests/ArrayAccess_indirect_append.phpt

@@ -0,0 +1,43 @@
+--TEST--
+Using indirect append on ArrayAccess object
+--FILE--
+<?php
+
+class AA implements ArrayAccess {
+    private $data = [];
+    public function &offsetGet($name) {
+        if (null === $name) {
+            return $this->data[];
+        } else {
+            return $this->data[$name];
+        }
+    }
+    public function offsetSet($name, $value) {
+        $this->data[$name] = $value;
+    }
+    public function offsetUnset($name) {}
+    public function offsetExists($name) {}
+}
+
+$aa = new AA;
+$aa[3] = 1;
+$aa[][][0] = 2;
+var_dump($aa);
+
+?>
+--EXPECT--
+object(AA)#1 (1) {
+  ["data":"AA":private]=>
+  array(2) {
+    [3]=>
+    int(1)
+    [4]=>
+    array(1) {
+      [0]=>
+      array(1) {
+        [0]=>
+        int(2)
+      }
+    }
+  }
+}

Zend/tests/add_006.phpt

@@ -38,11 +38,19 @@ var_dump($c);
 echo "Done\n";
 ?>
 --EXPECTF--	
+
+Warning: A non-numeric value encountered in %s on line %d
 int(75636)
+
+Notice: A non well formed numeric value encountered in %s on line %d
 int(951858)
 int(48550510)
 float(75661.68)
+
+Warning: A non-numeric value encountered in %s on line %d
 int(75636)
+
+Notice: A non well formed numeric value encountered in %s on line %d
 int(951858)
 int(48550510)
 float(75661.68)

Zend/tests/add_007.phpt

@@ -19,8 +19,13 @@ var_dump($c);
 echo "Done\n";
 ?>
 --EXPECTF--	
+
+Warning: A non-numeric value encountered in %s on line %d
+
 Exception: Unsupported operand types
 
+Warning: A non-numeric value encountered in %s on line %d
+
 Fatal error: Uncaught Error: Unsupported operand types in %s:%d
 Stack trace:
 #0 {main}

Zend/tests/anon/013.phpt

@@ -0,0 +1,15 @@
+--TEST--
+closure binding to anonymous class
+--FILE--
+<?php
+$class = new class {};
+$foo = function() {
+    return $this;
+};
+
+$closure = Closure::bind($foo, $class, $class);
+var_dump($closure());
+?>
+--EXPECTF--
+object(class@anonymous)#1 (0) {
+}

Zend/tests/anon/014.phpt

@@ -0,0 +1,16 @@
+--TEST--
+anonymous class trait binding
+--FILE--
+<?php
+trait TaskTrait {
+    function run() {
+        return 'Running...';
+    }
+}
+$class = new class() {
+  use TaskTrait;
+};
+var_dump($class->run());
+?>
+--EXPECTF--
+string(10) "Running..."

Zend/tests/arg_unpack/by_ref_separation.phpt

@@ -0,0 +1,36 @@
+--TEST--
+Array must be separated if unpacking by reference
+--FILE--
+<?php
+
+function inc(&... $args) {
+    foreach ($args as &$arg) {
+        $arg++;
+    }
+}
+
+$arr = [1, 2];
+$arr[] = 3;
+$arr2 = $arr;
+inc(...$arr);
+var_dump($arr);
+var_dump($arr2);
+
+?>
+--EXPECT--
+array(3) {
+  [0]=>
+  int(2)
+  [1]=>
+  int(3)
+  [2]=>
+  int(4)
+}
+array(3) {
+  [0]=>
+  int(1)
+  [1]=>
+  int(2)
+  [2]=>
+  int(3)
+}

Zend/tests/array_addition_not_commutative.phpt

@@ -0,0 +1,19 @@
+--TEST--
+Array addition is not commutative -- do not swap operands
+--FILE--
+<?php
+
+$array = [1, 2, 3];
+$array = [4, 5, 6] + $array;
+var_dump($array);
+
+?>
+--EXPECT--
+array(3) {
+  [0]=>
+  int(4)
+  [1]=>
+  int(5)
+  [2]=>
+  int(6)
+}

Zend/tests/assert/expect_015.phpt

@@ -154,7 +154,7 @@ Warning: assert(): assert(0 && ($a = function () {
     $x = $a ? $b : $c;
     $x = $a ?: $c;
     $x = $a ?? $b;
-    list($a, $b, $c) = [1, 2 => 'x', 'z' => 'c'];
+    [$a, $b, $c] = [1, 2 => 'x', 'z' => 'c'];
     @foo();
     $y = clone $x;
     yield 1 => 2;

Zend/tests/assert/indirect_var_access_misoptimization.phpt

@@ -0,0 +1,19 @@
+--TEST--
+Misoptimization when variable is modified by assert()
+--INI--
+zend.assertions=1
+--FILE--
+<?php
+
+function test() {
+    $i = 0;
+    assert('$i = new stdClass');
+    $i += 1;
+    var_dump($i);
+}
+test();
+
+?>
+--EXPECTF--
+Notice: Object of class stdClass could not be converted to int in %s on line %d
+int(2)

Zend/tests/ast_serialize_backtick_literal.phpt

@@ -0,0 +1,11 @@
+--TEST--
+Serialization of backtick literal is incorrect
+--INI--
+zend.assertions=1
+--FILE--
+<?php
+
+assert_options(ASSERT_WARNING);
+assert(false && `echo -n ""`);
+--EXPECTF--
+Warning: assert(): assert(false && `echo -n ""`) failed in %s%east_serialize_backtick_literal.php on line %d

Zend/tests/bug29015.phpt

@@ -6,9 +6,16 @@ $a = new stdClass();
 $x = "";
 $a->$x = "string('')";
 var_dump($a);
+$a->{"\0"} = 42;
+var_dump($a);
 ?>
 --EXPECTF--
-Fatal error: Uncaught Error: Cannot access empty property in %sbug29015.php:4
+object(stdClass)#1 (1) {
+  [""]=>
+  string(10) "string('')"
+}
+
+Fatal error: Uncaught Error: Cannot access property started with '\0' in %s:%d
 Stack trace:
 #0 {main}
-  thrown in %sbug29015.php on line 4
+  thrown in %s on line %d

Zend/tests/bug29883.phpt

@@ -3,7 +3,7 @@ Bug #29883 (isset gives invalid values on strings)
 --FILE--
 <?php
 $x = "bug";
-var_dump(isset($x[-1]));
+var_dump(isset($x[-10]));
 var_dump(isset($x["1"]));
 echo $x["1"]."\n";
 ?>

Zend/tests/bug31098.phpt

@@ -18,7 +18,7 @@ var_dump(isset($a['b']));
 $simpleString = "Bogus String Text";
 echo isset($simpleString->wrong)?"bug\n":"ok\n";
 echo isset($simpleString["wrong"])?"bug\n":"ok\n";
-echo isset($simpleString[-1])?"bug\n":"ok\n";
+echo isset($simpleString[-20])?"bug\n":"ok\n";
 echo isset($simpleString[0])?"ok\n":"bug\n";
 echo isset($simpleString["0"])?"ok\n":"bug\n";
 echo isset($simpleString["16"])?"ok\n":"bug\n";

Zend/tests/bug33996.phpt

@@ -19,15 +19,19 @@ function NormalTest($a)
     echo "Hi!";
 }
 
-NormalTest();
-FooTest();
+try {
+	NormalTest();
+} catch (Throwable $e) {
+	echo "Exception: " . $e->getMessage() . "\n";
+}
+try {
+	FooTest();
+} catch (Throwable $e) {
+	echo "Exception: " . $e->getMessage() . "\n";
+}
 FooTest(new Foo());
 ?>
 --EXPECTF--
-Warning: Missing argument 1 for NormalTest(), called in %sbug33996.php on line %d and defined in %sbug33996.php on line %d
-Hi!
-Fatal error: Uncaught TypeError: Argument 1 passed to FooTest() must be an instance of Foo, none given, called in %sbug33996.php on line %d and defined in %sbug33996.php:%d
-Stack trace:
-#0 %s(%d): FooTest()
-#1 {main}
-  thrown in %sbug33996.php on line %d
+Exception: Too few arguments to function NormalTest(), 0 passed in %sbug33996.php on line 18 and exactly 1 expected
+Exception: Too few arguments to function FooTest(), 0 passed in %sbug33996.php on line 23 and exactly 1 expected
+Hello!

Zend/tests/bug34617.phpt

@@ -8,7 +8,8 @@ class Thing {}
 function boom()
 {
     $reader = xml_parser_create();
-    xml_set_object($reader, new Thing());
+    $thing = new Thing();
+    xml_set_object($reader, $thing);
     die("ok\n");
     xml_parser_free($reader);
 }

Zend/tests/bug38047.phpt

@@ -43,7 +43,9 @@ Non-static method A::A_ftk() should not be called statically
 1 %sbug38047.php:13 get_error_context()
 2 %sbug38047.php:36 kalus_error_handler()
 
-Missing argument 1 for A::A_ftk(), called in %sbug38047.php on line 36 and defined
-1 %sbug38047.php:13 get_error_context()
-2 %sbug38047.php:7 kalus_error_handler()
-3 %sbug38047.php:36 A_ftk()
+
+Fatal error: Uncaught Error: Too few arguments to function A::A_ftk(), 0 passed in %sbug38047.php on line 36 and exactly 1 expected in %sbug38047.php:7
+Stack trace:
+#0 %sbug38047.php(36): A::A_ftk()
+#1 {main}
+  thrown in %sbug38047.php on line 7

Zend/tests/bug41117_1.phpt

@@ -10,5 +10,4 @@ class foo {
 $obj = new foo("Hello world");
 ?>
 --EXPECTF--
-Fatal error: Cannot re-assign $this in %sbug41117_1.php on line 3
-
+Fatal error: Cannot use $this as parameter in %s on line %d

Zend/tests/bug41813.phpt

@@ -9,7 +9,7 @@ $foo[0]->bar = "xyz";
 echo "Done\n";
 ?>
 --EXPECTF--	
-Fatal error: Uncaught Error: Cannot use string offset as an array in %s:%d
+Fatal error: Uncaught Error: Cannot use string offset as an object in %s:%d
 Stack trace:
 #0 {main}
   thrown in %s on line %d

Zend/tests/bug42802.phpt

@@ -1,5 +1,5 @@
 --TEST--
-Bug #42802 (Namespace not supported in typehints)
+Bug #42802 (Namespace not supported in types)
 --FILE--
 <?php
 namespace foo;

Zend/tests/bug49866.phpt

@@ -7,7 +7,7 @@ $b = &$a[1];
 $b = "f";
 echo $a;
 --EXPECTF--
-Fatal error: Uncaught Error: Cannot create references to/from string offsets nor overloaded objects in %sbug49866.php:3
+Fatal error: Uncaught Error: Cannot create references to/from string offsets in %sbug49866.php:3
 Stack trace:
 #0 {main}
   thrown in %sbug49866.php on line 3

Zend/tests/bug52355.phpt

@@ -0,0 +1,20 @@
+--TEST--
+Bug #52355 (Negating zero does not produce negative zero)
+--FILE--
+<?php
+
+var_dump(-0.0);
+var_dump(-(float)"0");
+
+$foo = -sin(0);
+
+var_dump($foo);
+
+var_dump(@(1.0 / -0.0));
+
+?>
+--EXPECT--
+float(-0)
+float(-0)
+float(-0)
+float(-INF)

Zend/tests/bug52484.phpt

@@ -10,14 +10,14 @@ class A {
 }
 
 $a = new A();
-$prop = null;
+$prop = "\0";
 
 unset($a->$prop);
 
 ?>
 --EXPECTF--
-Fatal error: Uncaught Error: Cannot access empty property in %s:%d
+Fatal error: Uncaught Error: Cannot access property started with '\0' in %s:%d
 Stack trace:
-#0 %s(%d): A->__unset('')
+#0 %s(%d): A->__unset('\x00')
 #1 {main}
   thrown in %s on line %d

Zend/tests/bug52484_2.phpt

@@ -10,14 +10,14 @@ class A {
 }
 
 $a = new A();
-$prop = null;
+$prop = "\0";
 
 $a->$prop = 2;
 
 ?>
 --EXPECTF--
-Fatal error: Uncaught Error: Cannot access empty property in %s:%d
+Fatal error: Uncaught Error: Cannot access property started with '\0' in %s:%d
 Stack trace:
-#0 %s(%d): A->__set('', 2)
+#0 %s(%d): A->__set('\x00', 2)
 #1 {main}
   thrown in %s on line %d

Zend/tests/bug52484_3.phpt

@@ -10,14 +10,14 @@ class A {
 }
 
 $a = new A();
-$prop = null;
+$prop = "\0";
 
 var_dump($a->$prop);
 
 ?>
 --EXPECTF--
-Fatal error: Uncaught Error: Cannot access empty property in %s:%d
+Fatal error: Uncaught Error: Cannot access property started with '\0' in %s:%d
 Stack trace:
-#0 %s(%d): A->__get('')
+#0 %s(%d): A->__get('\x00')
 #1 {main}
   thrown in %s on line %d

Zend/tests/bug52879.phpt

@@ -8,7 +8,7 @@ class MyClass {
 		$this->myRef = $value;
 	}
 }
-$myGlobal=new MyClass($myGlobal);
+$myGlobal=new MyClass();
 $myGlobal->myRef=&$myGlobal;
 $myGlobal->myNonExistentProperty="ok\n";
 echo $myGlobal;

Zend/tests/bug53432.phpt

@@ -0,0 +1,65 @@
+--TEST--
+Bug #53432: Assignment via string index access on an empty string converts to array
+--FILE--
+<?php
+
+$str = '';
+var_dump($str[0] = 'a');
+var_dump($str);
+
+$str = '';
+var_dump($str[5] = 'a');
+var_dump($str);
+
+$str = '';
+var_dump($str[-1] = 'a');
+var_dump($str);
+
+$str = '';
+var_dump($str['foo'] = 'a');
+var_dump($str);
+
+$str = '';
+try {
+    var_dump($str[] = 'a');
+} catch (Error $e) {
+    echo "Error: {$e->getMessage()}\n";
+}
+var_dump($str);
+
+$str = '';
+try {
+    var_dump($str[0] += 1);
+} catch (Error $e) {
+    echo "Error: {$e->getMessage()}\n";
+}
+var_dump($str);
+
+$str = '';
+try {
+    var_dump($str[0][0] = 'a');
+} catch (Error $e) {
+    echo "Error: {$e->getMessage()}\n";
+}
+var_dump($str);
+
+?>
+--EXPECTF--
+string(1) "a"
+string(1) "a"
+string(1) "a"
+string(6) "     a"
+
+Warning: Illegal string offset:  -1 in %s on line %d
+NULL
+string(0) ""
+
+Warning: Illegal string offset 'foo' in %s on line %d
+string(1) "a"
+string(1) "a"
+Error: [] operator not supported for strings
+string(0) ""
+Error: Cannot use assign-op operators with string offsets
+string(0) ""
+Error: Cannot use string offset as an array
+string(0) ""

Zend/tests/bug55705.phpt

@@ -6,7 +6,7 @@ function f(callable $c) {}
 f();
 ?>
 --EXPECTF--
-Fatal error: Uncaught TypeError: Argument 1 passed to f() must be callable, none given, called in %s on line 3 and defined in %s:%d
+Fatal error: Uncaught Error: Too few arguments to function f(), 0 passed in %s on line 3 and exactly 1 expected in %s:2
 Stack trace:
 #0 %s(%d): f()
 #1 {main}

Zend/tests/bug62358.phpt

@@ -23,4 +23,4 @@ class B extends A {
 }
 ?>
 --EXPECTF--
-Warning: Declaration of B::foo($var) should be compatible with A::foo() in %sbug62358.php on line %d
+Fatal error: Declaration of B::foo($var) must be compatible with I::foo() in %sbug62358.php on line 17

Zend/tests/bug62814.phpt

@@ -0,0 +1,20 @@
+--TEST--
+Bug #62814: It is possible to stiffen child class members visibility
+--FILE--
+<?php
+
+class A {
+    private function test() { }
+}
+
+class B extends A {
+    protected function test() { }
+}
+
+class C extends B {
+    private function test() { }
+}
+
+?>
+--EXPECTF--
+Fatal error: Access level to C::test() must be protected (as in class B) or weaker in %s on line %d

Zend/tests/bug65784.phpt

@@ -57,8 +57,13 @@ $bar = foo3();
 string(9) "not catch"
 NULL
 
-Fatal error: Uncaught Error: Class 'NotExists' not found in %sbug65784.php:%d
+Fatal error: Uncaught Exception: not catched in %sbug65784.php:42
 Stack trace:
-#0 %s(%d): foo3()
+#0 %sbug65784.php(52): foo3()
 #1 {main}
-  thrown in %sbug65784.php on line %d
+
+Next Error: Class 'NotExists' not found in %sbug65784.php:46
+Stack trace:
+#0 %sbug65784.php(52): foo3()
+#1 {main}
+  thrown in %sbug65784.php on line 46

Zend/tests/bug68370.phpt

@@ -13,6 +13,4 @@ $x = $c->test();
 print_r($x);
 unset($c, $x);
 --EXPECTF--
-Array
-(
-)
+Fatal error: Cannot unset $this in %sbug68370.php on line 4

Zend/tests/bug68652.phpt

@@ -28,6 +28,7 @@ class Bar {
     }
 
     public function __destruct() {
+        if (!isset(self::$instance)) return;
         Foo::getInstance();
     }
 }

Zend/tests/bug69467.phpt

@@ -18,4 +18,4 @@ $test = new Foo();
 var_dump($test instanceof Baz);
 ?>
 --EXPECTF--
-Fatal error: Access level to Bar::bad() must be public (as in class Baz) in %sbug69467.php on line %d
+Fatal error: Access level to Foo::bad() must be public (as in class Baz) in %sbug69467.php on line %d

Zend/tests/bug69537.phpt

@@ -0,0 +1,19 @@
+--TEST--
+Bug #69537 (__debugInfo with empty string for key gives error)
+--FILE--
+<?php
+class Foo {
+
+    public function __debugInfo(){
+        return ['' => 1];
+    }
+}
+
+var_dump(new Foo);
+?>
+--EXPECTF--
+object(Foo)#%d (%d) {
+  [""]=>
+  int(1)
+}
+

Zend/tests/bug69767.phpt

@@ -5,4 +5,4 @@ Bug #69767 (Default parameter value with wrong type segfaults)
 function foo(String $bar = 0) {}
 ?>
 --EXPECTF--
-Fatal error: Default value for parameters with a string type hint can only be string or NULL in %sbug69767.php on line %d
+Fatal error: Default value for parameters with a string type can only be string or NULL in %sbug69767.php on line %d

Zend/tests/bug69955.phpt

@@ -27,8 +27,6 @@ $c10 = new C10;
 var_dump($c10[] += 5);
 --EXPECTF--
 Inside C10::offsetGet
-
-Notice: Undefined variable: offset in %sbug69955.php on line 10
 NULL
 
 Inside C10::offsetSet

Zend/tests/bug69989_1.phpt

@@ -0,0 +1,15 @@
+--TEST--
+Bug #69989: Cycle collection for yielded values
+--FILE--
+<?php
+
+function gen() {
+    yield yield;
+}
+$gen = gen();
+$gen->send($gen);
+
+?>
+===DONE===
+--EXPECT--
+===DONE===

Zend/tests/bug69989_2.phpt

@@ -0,0 +1,42 @@
+--TEST--
+Collection of some cycles on unfinished generators
+--FILE--
+<?php
+
+// CV
+function gen1() {
+    $gen = yield;
+    yield;
+}
+
+$gen = gen1();
+$gen->send($gen);
+
+// This
+class Test {
+    public $gen;
+    public function gen2() {
+        yield;
+    }
+}
+
+$test = new Test;
+$test->gen = $test->gen2();
+
+// Closure object
+$gen3 = (function() use (&$gen3) {
+    yield;
+})();
+
+// Yield from array
+function gen4() {
+    yield from [yield];
+}
+
+$gen = gen4();
+$gen->send($gen);
+
+?>
+===DONE===
+--EXPECT--
+===DONE===

Zend/tests/bug69989_3.phpt

@@ -0,0 +1,44 @@
+--TEST--
+Generator cycle collection edge cases
+--FILE--
+<?php
+
+// Extra args
+function gen1() {
+    yield;
+}
+$obj = new stdClass;
+$obj->gen = gen1($obj);
+
+// Symtable
+function gen2() {
+    $varName = 'a';
+    $$varName = yield;
+    yield;
+}
+$gen = gen2();
+$gen->send($gen);
+
+// Symtable indirect
+function gen3() {
+    $varName = 'a';
+    $$varName = 42;
+    $var = yield;
+    yield;
+}
+$gen = gen3();
+$gen->send($gen);
+
+// Yield from root
+function gen4() {
+    yield from yield;
+}
+$gen = gen4();
+$gen2 = gen4($gen);
+$gen2->send([1, 2, 3]);
+$gen->send($gen2);
+
+?>
+===DONE===
+--EXPECT--
+===DONE===

Zend/tests/bug70083.phpt

@@ -0,0 +1,26 @@
+--TEST--
+Bug #70083 (Use after free with assign by ref to overloaded objects)
+--FILE--
+<?php
+
+class foo {
+	private $var;
+	function __get($e) {
+		return $this;
+	}
+}
+
+function &noref() { $foo = 1; return $foo; }
+
+$foo = new foo;
+$foo->i = &noref();
+var_dump($foo);
+
+?>
+--EXPECTF--
+
+Fatal error: Uncaught Error: Cannot assign by reference to overloaded object in %s:%d
+Stack trace:
+#0 {main}
+  thrown in %s on line %d
+

Zend/tests/bug70089.phpt

@@ -34,4 +34,4 @@ try {
 string(36) "Cannot use string offset as an array"
 string(27) "Cannot unset string offsets"
 string(41) "Only variables can be passed by reference"
-string(64) "Cannot increment/decrement overloaded objects nor string offsets"
+string(41) "Cannot increment/decrement string offsets"

Zend/tests/bug70685.phpt

@@ -15,7 +15,7 @@ var_dump($c);
 
 ?>
 --EXPECTF--
-Warning: Cannot bind internal method SplDoublyLinkedList::count() to object of class cls in %s on line %d
+Warning: Cannot bind method SplDoublyLinkedList::count() to object of class cls in %s on line %d
 NULL
 
 Warning: Cannot rebind scope of closure created by ReflectionFunctionAbstract::getClosure() in %s on line %d

Zend/tests/bug70689.phpt

@@ -19,4 +19,8 @@ try {
 
 ?>
 --EXPECTF--
-Missing argument 1 for foo(), called in %sbug70689.php on line %d and defined
+Fatal error: Uncaught Error: Too few arguments to function foo(), 0 passed in %sbug70689.php on line 12 and exactly 1 expected in %sbug70689.php:3
+Stack trace:
+#0 %sbug70689.php(12): foo()
+#1 {main}
+  thrown in %sbug70689.php on line 3

Zend/tests/bug70748.phpt

@@ -12,7 +12,7 @@ var_dump(parse_ini_file($ini_file));
 ?>
 --CLEAN--
 <?php
-unlink(__DIR__ . "bug70748.ini");
+unlink(__DIR__ . "/bug70748.ini");
 ?>
 --EXPECTF--
 Warning: syntax error, unexpected $end, expecting '}' in %sbug70748.ini on line %d

Zend/tests/bug70804.phpt

@@ -0,0 +1,17 @@
+--TEST--
+Bug #70804 (Unary add on negative zero produces positive zero)
+--FILE--
+<?php
+
+var_dump(+(-0.0));
+var_dump(+(float)"-0");
+
+$foo = +(-sin(0));
+
+var_dump($foo);
+
+?>
+--EXPECT--
+float(-0)
+float(-0)
+float(-0)

Zend/tests/bug70918.phpt

@@ -0,0 +1,47 @@
+--TEST--
+Bug #70918 (Segfault using static outside of class scope)
+--FILE--
+<?php
+try {
+	static::x;
+} catch (Error $e) {
+	var_dump($e->getMessage());
+}
+
+try {
+	parent::x;
+} catch (Error $e) {
+	var_dump($e->getMessage());
+}
+
+try {
+	self::x;
+} catch (Error $e) {
+	var_dump($e->getMessage());
+}
+
+try {
+	new static;
+} catch (Error $e) {
+	var_dump($e->getMessage());
+}
+
+try {
+	static::x();
+} catch (Error $e) {
+	var_dump($e->getMessage());
+}
+
+try {
+	static::$i;
+} catch (Error $e) {
+	var_dump($e->getMessage());
+}
+?>
+--EXPECT--
+string(52) "Cannot access static:: when no class scope is active"
+string(52) "Cannot access parent:: when no class scope is active"
+string(50) "Cannot access self:: when no class scope is active"
+string(52) "Cannot access static:: when no class scope is active"
+string(52) "Cannot access static:: when no class scope is active"
+string(52) "Cannot access static:: when no class scope is active"

Zend/tests/bug71067.phpt

@@ -0,0 +1,31 @@
+--TEST--
+Bug #71067 (Local object in class method stays in memory for each call)
+--INI--
+opcache.enable=0
+error_reporting=0
+--FILE--
+<?php
+class Test {
+	public function test(){
+		$arr = (object) [
+			'children' => []
+		];
+		$arr->children[] = 1;
+		return $arr;
+	}
+}
+
+$o = new Test();
+$o->test();
+
+print_r($o->test());
+?>
+--EXPECT--
+stdClass Object
+(
+    [children] => Array
+        (
+            [0] => 1
+        )
+
+)

Zend/tests/bug71086.phpt

@@ -0,0 +1,14 @@
+--TEST--
+Bug #71086: Invalid numeric literal parse error within highlight_string() function
+--FILE--
+<?php
+
+$highlightedString = highlight_string("<?php \n 09 09 09;", true);
+var_dump($highlightedString);
+
+?>
+--EXPECT--
+string(169) "<code><span style="color: #000000">
+<span style="color: #0000BB">&lt;?php&nbsp;<br />&nbsp;</span><span style="color: #007700">09&nbsp;09&nbsp;09;</span>
+</span>
+</code>"

Zend/tests/bug71154.phpt

@@ -0,0 +1,19 @@
+--TEST--
+Bug #71154: Incorrect HT iterator invalidation causes iterator reuse
+--FILE--
+<?php
+
+$array = [1, 2, 3];
+foreach ($array as &$ref) {
+    /* Free array, causing free of iterator */
+    $array = [];
+    /* Reuse the iterator.
+     * However it will also be reused on next foreach iteration */
+    $it = new ArrayIterator([1, 2, 3]);
+    $it->rewind();
+}
+var_dump($it->current());
+
+?>
+--EXPECT--
+int(1)

Zend/tests/bug71163.phpt

@@ -0,0 +1,25 @@
+--TEST--
+Bug #71163 (Segmentation Fault (cleanup_unfinished_calls))
+--FILE--
+<?php
+function __autoload($name) { 
+	eval ("class $name extends Exception { public static function foo() {}}");
+	throw new Exception("boom");
+}
+
+function test2() {
+	try {
+		Test::foo();
+	} catch (Exception $e) {
+		echo "okey";
+	}
+}
+
+function test() {
+	test2();
+}
+
+test();
+?>
+--EXPECT--
+okey

Zend/tests/bug71196.phpt

@@ -0,0 +1,13 @@
+--TEST--
+Bug #71196 (Memory leak with out-of-order live ranges)
+--FILE--
+<?php
+try  {
+        $a = "1";
+        [1, (y().$a.$a) . ($a.$a)];
+} catch (Error $e) {
+        var_dump($e->getMessage());
+}
+?>
+--EXPECT--
+string(30) "Call to undefined function y()"

Zend/tests/bug71221.phpt

@@ -0,0 +1,10 @@
+--TEST--
+Bug #71221 (Null pointer deref (segfault) in get_defined_vars via ob_start)
+--FILE--
+<?php 
+ob_start("get_defined_vars");
+ob_end_clean();
+?>
+okey
+--EXPECT--
+okey

Zend/tests/bug71248.phpt

@@ -0,0 +1,28 @@
+--TEST--
+Bug #71248 (Wrong interface is enforced)
+--FILE--
+<?php
+class Hint1 { }
+class Hint2 { }
+
+abstract class Base {
+    public function __construct(Hint1 $x) { }
+}
+
+interface Iface {
+    public function __construct(Hint1 $x);
+}
+
+class Foo extends Base implements Iface {
+}
+
+$code = <<<'PHP'
+abstract class Bar extends Base {
+    public function __construct(Hint2 $x) { }
+}
+PHP;
+eval($code);
+?>
+OK
+--EXPECT--
+OK

Zend/tests/bug71266.phpt

@@ -0,0 +1,22 @@
+--TEST--
+Bug #71266 (Missing separation of properties HT in foreach etc)
+--FILE--
+<?php
+$one = 1;
+$two = 2;
+$arr = ['foo' => $one, 'bar' => $two];
+$obj = (object) $arr;
+foreach ($obj as $val) {
+    var_dump($val);
+    $obj->bar = 42;
+}
+
+$arr = ['foo' => $one, 'bar' => $two];
+$obj = (object) $arr;
+next($obj);
+var_dump(current($arr));
+?>
+--EXPECT--
+int(1)
+int(42)
+int(1)

Zend/tests/bug71275.phpt

@@ -0,0 +1,27 @@
+--TEST--
+Bug #71275 (Bad method called on cloning an object having a trait)
+--FILE--
+<?php
+
+trait MyTrait {
+	public function _() {
+		throw new RuntimeException('Should not be called');
+	}
+}
+
+
+class MyClass {
+	use MyTrait;
+
+	public function __clone() {
+		echo "I'm working hard to clone";
+	}
+}
+
+
+$instance = new MyClass();
+clone $instance;
+
+?>
+--EXPECT--
+I'm working hard to clone

Zend/tests/bug71300.phpt

@@ -0,0 +1,28 @@
+--TEST--
+Bug #71300 (Segfault in zend_fetch_string_offset)
+--FILE--
+<?php
+function test1() {
+	for ($n = 'a'; $n < 'g'; $n++) {
+		$$n = 1;
+	}
+	$$n = $$n[++$n] = "test";
+	return $$n;
+}
+
+var_dump(test1());
+
+function test2() {
+    /* See #71303 for why not using for loop here */
+	$n = "a";
+	$$n .= $$n[++$n] = "test";
+	return $$n;
+}
+
+var_dump(test2());
+?>
+--EXPECTF--
+string(4) "test"
+
+Notice: Array to string conversion in %sbug71300.php on line %d
+string(9) "Arraytest"

Zend/tests/bug71336.phpt

@@ -0,0 +1,48 @@
+--TEST--
+Bug #71336 (Wrong is_ref on properties as exposed via get_object_vars())
+--FILE--
+<?php
+class A
+{
+	protected $bar = array('baz');
+
+	function bar()
+	{
+		array_pop($this->bar);
+		$vars = get_object_vars($this);
+		$this->bar[] = array('buz');
+		print_r($vars);
+	}
+
+	function foo() {
+		array_pop($this->bar);
+		$dummy = &$this->bar;
+		$vars = get_object_vars($this);
+		$this->bar[] = array('buz');
+		print_r($vars);
+	}
+}
+
+(new A())->bar();
+(new A())->foo();
+?>
+--EXPECT--
+Array
+(
+    [bar] => Array
+        (
+        )
+
+)
+Array
+(
+    [bar] => Array
+        (
+            [0] => Array
+                (
+                    [0] => buz
+                )
+
+        )
+
+)

Zend/tests/bug71359.phpt

@@ -0,0 +1,61 @@
+--TEST--
+Bug #71359: Null coalescing operator and magic
+--FILE--
+<?php
+class AA {
+    private $data = [];
+    public function __isset($name) {
+        echo "__isset($name)\n";
+        return array_key_exists($name, $this->data);
+    }
+    public function &__get($name) {
+        echo "__get($name)\n";
+        if (!array_key_exists($name, $this->data)) {
+            throw new Exception('Unknown offset');
+        }
+        return $this->data[$name];
+    }
+    public function __set($name, $value) {
+        echo "__set($name)\n";
+        $this->data[$name] = $value;
+    }
+    public function __unset($name) {
+        echo "__unset($name)\n";
+        unset($this->data[$name]);
+    }
+}
+
+$aa = new AA;
+var_dump(isset($aa->zero->one->two));
+var_dump(isset($aa->zero->foo));
+var_dump($aa->zero ?? 42);
+var_dump($aa->zero->one->two ?? 42);
+$aa->zero = new AA;
+$aa->zero->one = new AA;
+var_dump(isset($aa->zero->one->two));
+var_dump($aa->zero->one->two ?? 42);
+?>
+--EXPECT--
+__isset(zero)
+bool(false)
+__isset(zero)
+bool(false)
+__isset(zero)
+int(42)
+__isset(zero)
+int(42)
+__set(zero)
+__get(zero)
+__set(one)
+__isset(zero)
+__get(zero)
+__isset(one)
+__get(one)
+__isset(two)
+bool(false)
+__isset(zero)
+__get(zero)
+__isset(one)
+__get(one)
+__isset(two)
+int(42)

Zend/tests/bug71414.phpt

@@ -0,0 +1,25 @@
+--TEST--
+Bug #71414 (Interface method override inherited method and implemented in a trait causes fatal error)
+--FILE--
+<?php
+interface InterfaceY {
+    public function z(): string;
+}
+
+trait TraitY {
+    public function z(): string {
+    }
+}
+
+class X {
+    public function z() {
+    }
+}
+
+class Y extends X implements InterfaceY {
+    use TraitY;
+}
+
+echo "ok";
+--EXPECT--
+ok

Zend/tests/bug71428.1.phpt

@@ -0,0 +1,13 @@
+--TEST--
+bug #71428.1: inheritance with null default values
+--FILE--
+<?php
+class A {
+    public function m(array $a = null) {}
+}
+class B extends A {
+    public function m(array $a = []) {}
+}
+--EXPECTF--
+Warning: Declaration of B::m(array $a = Array) should be compatible with A::m(?array $a = NULL) in %sbug71428.1.php on line 7
+

Zend/tests/bug71428.2.phpt

@@ -0,0 +1,23 @@
+--TEST--
+bug #71428.2: inheritance of ye olde dynamic interfaces
+--SKIPIF--
+<?php if (!extension_loaded('pdo')) die("skip PDO is not available"); ?>
+--FILE--
+<?php
+interface StatementInterface {
+	public function fetch($first = null, $second, $third);
+}
+
+class Statement extends PDOStatement implements StatementInterface {}
+
+interface StatementInterface1 {
+	public function fetch($first = null, $second = null, $third = null);
+}
+
+class Statement1 extends PDOStatement implements StatementInterface1 {}
+
+echo "ok";
+?>
+--EXPECT--
+ok
+

Zend/tests/bug71428.3.phpt

@@ -0,0 +1,11 @@
+--TEST--
+bug #71428: Validation type inheritance with = NULL
+--FILE--
+<?php
+class A { }
+class B           {  public function m(A $a = NULL, $n) { echo "B.m";} };
+class C extends B {  public function m(A $a       , $n) { echo "C.m";} };
+?>
+--EXPECTF--
+Warning: Declaration of C::m(A $a, $n) should be compatible with B::m(?A $a, $n) in %sbug71428.3.php on line 4
+

Zend/tests/bug71470.phpt

@@ -0,0 +1,13 @@
+--TEST--
+Bug #71470: Leaked 1 hashtable iterators
+--FILE--
+<?php
+
+$array = [1, 2, 3];
+foreach ($array as &$v) {
+    die("foo\n");
+}
+
+?>
+--EXPECT--
+foo

Zend/tests/bug71474.phpt

@@ -0,0 +1,23 @@
+--TEST--
+Bug #71474: Crash because of VM stack corruption on Magento2
+--FILE--
+<?php
+class foo {
+	function __call($name, $args) {
+		$a = $b = $c = $d = $e = $f = 1;
+	}
+}
+
+function test($n, $x) {
+//	var_dump($n);
+	if ($n > 0) {
+		$x->bug();
+		test($n - 1, $x);
+	}
+}
+
+test(3000, new foo());
+echo "OK\n";
+?>
+--EXPECT--
+OK

Zend/tests/bug71529.phpt

@@ -0,0 +1,23 @@
+--TEST--
+Bug #71529: Variable references on array elements don't work when using count
+--FILE--
+<?php
+
+$a = [1];
+$a[] = &$a[out(count($a) - 1)];
+var_dump($a);
+
+function out($what) {
+    var_dump($what);
+    return $what;
+}
+
+?>
+--EXPECT--
+int(0)
+array(2) {
+  [0]=>
+  &int(1)
+  [1]=>
+  &int(1)
+}

Zend/tests/bug71572.phpt

@@ -0,0 +1,27 @@
+--TEST--
+Bug #71572: String offset assignment from an empty string inserts null byte
+--FILE--
+<?php
+
+$str = "abc";
+var_dump($str{0} = "");
+var_dump($str{1} = "");
+var_dump($str{3} = "");
+var_dump($str{10} = "");
+var_dump($str);
+?>
+==DONE==
+--EXPECTF--
+Warning: Cannot assign an empty string to a string offset in %s on line %d
+NULL
+
+Warning: Cannot assign an empty string to a string offset in %s on line %d
+NULL
+
+Warning: Cannot assign an empty string to a string offset in %s on line %d
+NULL
+
+Warning: Cannot assign an empty string to a string offset in %s on line %d
+NULL
+string(3) "abc"
+==DONE==

Zend/tests/bug71622.phpt

@@ -0,0 +1,30 @@
+--TEST--
+Bug #71622 (Strings used in pass-as-reference cannot be used to invoke C::$callable())
+--FILE--
+<?php
+
+function getMethodName(&$methodName) {
+	$methodName = Abc::METHOD_NAME;
+}
+
+class Abc {
+	const METHOD_NAME = "goal";
+
+	private static function goal() {
+		echo "success\n";
+	}
+
+	public static function run() {
+		$method = "foobar";
+		getMethodName($method);
+		var_dump(is_callable("self::$method"));
+		self::$method();
+	}
+}
+
+Abc::run();
+
+?>
+--EXPECT--
+bool(true)
+success

Zend/tests/bug71695.phpt

@@ -0,0 +1,17 @@
+--TEST--
+Bug #71695 (Global variables are reserved before execution)
+--FILE--
+<?php
+function provideGlobals() {
+	var_dump(array_key_exists("foo", $GLOBALS));
+	var_dump(isset($GLOBALS["foo"]));
+	$GLOBALS += array("foo" => "foo");
+}
+
+provideGlobals();
+echo $foo;
+?>
+--EXPECT--
+bool(false)
+bool(false)
+foo

Zend/tests/bug71724.phpt

@@ -0,0 +1,19 @@
+--TEST--
+Bug #71724: yield from does not count EOLs
+--FILE--
+<?php
+
+function test()
+{
+    yield
+
+
+
+
+    from [__LINE__];
+}
+var_dump(test()->current());
+
+?>
+--EXPECT--
+int(10)

Zend/tests/bug71731.phpt

@@ -0,0 +1,64 @@
+--TEST--
+Bug #71731: Null coalescing operator and ArrayAccess
+--FILE--
+<?php
+
+class AA implements ArrayAccess {
+    private $data = [];
+    public function offsetExists($name) {
+        echo "offsetExists($name)\n";
+        return array_key_exists($name, $this->data);
+    }
+    public function &offsetGet($name) {
+        echo "offsetGet($name)\n";
+        if (!array_key_exists($name, $this->data)) {
+            throw new Exception('Unknown offset');
+        }
+        return $this->data[$name];
+    }
+    public function offsetSet($name, $value) {
+        echo "offsetSet($name)\n";
+        $this->data[$name] = $value;
+    }
+    public function offsetUnset($name) {
+        echo "offsetUnset($name)\n";
+        unset($this->data[$name]);
+    }
+}
+
+$aa = new AA;
+var_dump(isset($aa[0][1][2]));
+var_dump(isset($aa[0]->foo));
+var_dump($aa[0] ?? 42);
+var_dump($aa[0][1][2] ?? 42);
+
+$aa[0] = new AA;
+$aa[0][1] = new AA;
+var_dump(isset($aa[0][1][2]));
+var_dump($aa[0][1][2] ?? 42);
+
+?>
+--EXPECT--
+offsetExists(0)
+bool(false)
+offsetExists(0)
+bool(false)
+offsetExists(0)
+int(42)
+offsetExists(0)
+int(42)
+offsetSet(0)
+offsetGet(0)
+offsetSet(1)
+offsetExists(0)
+offsetGet(0)
+offsetExists(1)
+offsetGet(1)
+offsetExists(2)
+bool(false)
+offsetExists(0)
+offsetGet(0)
+offsetExists(1)
+offsetGet(1)
+offsetExists(2)
+int(42)