PDO driver constructors are throwing PdoException without setting
errorInfo, so create a new reusable function that throws exceptions
for PDO and will also set the errorInfo. Use this function in
pdo_mysql, pdo_sqlite, and pdo_pgsql.
Different manufacturer models may come with a
different endianness (motorola/intel) format. In
order to avoid a big refactor and a gigantic lookup
table, this commit simply attempts to switch the
endianness and proceed when values are acceptable.
Closes GH-5849.
Whether the type library is cached is actually irrelevant here; what
matters is that the symbols are imported, and since these are not
cached, we have to import them for every request. And we cannot cache
the symbols, because the import depends on the current codepage, but
the codepage is a `PHP_INI_ALL` setting.
We must not call `zend_list_delete()` in resource closer functions
exposed to userland, because decreasing the refcount there leads to
use-after-free scenarios. In this case, commit 4a42fbb worked for
typical use-cases where `xml_parser_free()` has been called exactly
once for the resource, because there is an internal zval (`->index`)
referencing the same resource which already increased the refcount by
one. However, when `xml_parser_free()` is called multiple times on the
same XML parser resource, the resource would be freed prematurely.
Instead we forcefully close the resource in `xml_parser_free()`. We
also could decrease the refcount of the resource there, but that would
require to call `xml_parser_free()` which is somewhat uncommon, and
would be particularly bad wrt. PHP 8 where that function is a NOP, and
as such doesn't have to be called. So we do no longer increase the
refcount of the resource when copying it to the internal zval, and let
the usualy refcounting semantics take care of the resource destruction.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=4a42fbbbc73aad7427aef5c89974d1833636e082>
These systems has two versions of the iovec interface dependent on
compiler flags passed, the legacy version causing little build issue.
Closes GH-5939.
Instead of storing the mapping base address and the address of
`execute_ex()` in a separate file in the temporary folder, we store
them right at the beginning of the memory mapping.
The file extension to mime type mapping *must* not depend on the file
extension's case for case-insensitive file systems, and *should* not
for case-sensitive file systems.
It does not make sense to make assumptions about `PHP_CONFIG_FILE_PATH`
during build time, since that value is never used during run time on
Windows. Since there is no `--with-config-file-path` on Windows
either, we define `PHP_CONFIG_FILE_PATH` as `""`.
This test fails occasionally due to timing issues, because the session
file may have been unlinked by the first `session_start()`'s GC. We
adapt the test expectation to this reality.
We must not mix multibyte and wide character strings in the
`COAUTHIDENTITY` structure. Using wide character strings throughout
would have the advantage that the remote connection can be established
regardless of the code page of the server, but that would more likely
break BC, so we just drop the wide character string conversion of the
username.
In the interest of avoiding side-effects during dumping, I'm
replacing the value with a <constant ast> string instead of
performing an update constant operation.
Fixes a use-after-free encountered in Symfony's SecurityBundle.
I don't have a reproducer for this, and believe the issue can only
occur if we leak an iterator (the leak is a separate issue).
We should not free the generator iterator here, because we do not
own it. The code that fetched the iterator is responsible for
releasing it. In the rare case where we do hit this code-path,
we cause a use-after-free.
A `BSTR` is similar to a `zend_string`; it stores the length of the
string just before the actual string, and thus the string may contain
NUL bytes. However, `php_com_olestring_to_string()` is supposed to
deal with arbitrary `OLECHAR*`s which may not be `BSTR`s, so we
introduce `php_com_bstr_to_string()` and use it for the only case where
we actually have to deal with `BSTR`s which may contain NUL bytes.
Contrary to `php_com_olestring_to_string()` we return a `zend_string`,
so we can save the re-allocation when converting to a `zval`.
We also cater to `php_com_string_to_olestring()` not being binary safe,
with basically the same fix we did for `php_com_olestring_to_string()`.
`atol()` returns a `long` which is not the same as `zend_long` on
LLP64; we use `ZEND_ATOL()` instead.
There is no need for a new test case, since filesize_large.phpt already
tests for that behavior; unfortunately, the FTP test suite relies on
`pcntl_fork()` and therefore cannot be run on Windows.
Even if the length of a maker note does not match our expectations
(either because the maker note is corrupted, or because our
expectations do not quite match reality), there is no need to let
parsing fail; we can still go on parsing the other meta information.
The `timercmp()` manpage[1] points out that some systems have a broken
implementation which does not support `>=`. This is definitely the
case for the Windows SDK, which only supports `<` and `>`.
[1] <https://linux.die.net/man/3/timercmp>
If the current character is a line break character, it cannot be a tab
or space character, so we would always fail with an invalid sequence
error. Obviously, these `scan_stat == 4` conditions are meant to be
exclusive.
Furthermore, if `in_pp == NULL || in_left_p == NULL` is true, we hit a
segfault if we are not returning right away. Obviously, the additional
constraints don't make sense, so we remove them.
As its name suggests, `sqlite3_data_count` returns the number of
columns in the current row of the result set; we are interested in the
number of columns regardless of the current row, so we have to use
`sqlite3_column_count` instead.
As of PHP 7.3.0, `sapi_cli_single_write()` is supposed to return `< 0`
on failure, but `fwrite()` returns a `size_t`, and signals error by
setting the stream's error indicator. We have to cater to that.
The color resolution is expected in bits 4-6 of the packed fields byte
of the logical screen descriptor (byte 10 of the GIF data stream),
according to the specification[1], section 18.
[1] <https://www.w3.org/Graphics/GIF/spec-gif89a.txt>
Since the member is not used in `OnUpdateEol()` that's not really an
issue, but still it's confusing to apparently have two INI settings
targeting the same member.
* PHP-7.2:
Fix#78876: Long variables cause OOM and temp files are not cleaned
Fix#78875: Long filenames cause OOM and temp files are not cleaned
Update NEWS for 7.2.31
Update CREDITS for PHP 7.2.30
Update NEWS for PHP 7.2.30
We must not cast `size_t` to `int` (unless the `size_t` value is
guaranteed to be less than or equal to `INT_MAX`). In this case we can
declare `array_len` as `size_t` in the first place.
We map the POSIX semantics of `IPC_PRIVATE` by creating unnamed file
mapping objects on Windows. While that is not particularly useful for
ext/shmop, which is the only bundled extension which uses `shmget()`,
it may be useful for external extensions.
The `start` parameter of `php_cgi_ini_activate_user_config` is supposed
to hold the byte offset of the doc root in the given `path`. However,
the current expression which fixes a potential type incompatibility
will ever only evaluate to zero or one, because it uses the *logical*
and operator (`&&`). Furthermore we notice that subtracting one from
`doc_root_len` is not necessary, so there is even no need for the
`start` parameter at all.
This is the change from GH-5417 but for FPM. This was stripping the
last character from the doc_root. Given how it is used, this should
be harmless, but let's make it less confusing...
I stumbled upon this while debugging a strange issue with
stream_socket_client() where it randomly throws out errors when
the connection timeout is set to below 1s. The logic to calculate
time difference in php_openssl_subtract_timeval() is wrong when
a.tv_usec < b.tv_usec, causing connection errors before the timeout
is reached.
We have to free the retrieved text content; to keep the code readable,
we extract a helper function to check for empty nodes. Unfortunately,
we cannot use xmlIsBlankNode(), because that also recognizes whitespace
only text content.
We also make sure to properly handle NULL returns from
xmlNodeGetContent().
This commit brings some substantial changes in behaviour due to the weird implementation.
This will be fixed in master due to BC concerns.
This reverts commit 1333b46d6d.
In commit a7305eb539 the last_message
field of the connection object was changed to be always non-persistent.
But there is a place on change_user path that still treats it
depending on conn->persistent flag. This will cause PHP crash after
com_change_user success when there is last_message set
The comment on `PS_VALIDATE_SID_FUNC(files)` is very clear that the
function is supposed to return `SUCCESS` if the session already exists.
So to detect a collision, we have to check for `SUCCESS`, not
`FAILURE`.
We also fix the wrong condition in session_regenerate_id() as well.
The skip message must start with the word 'skip', otherwise the test will not be skipped.
*Before:*
Running selected tests.
TEST 1/1 [ext/com_dotnet/tests/bug79332.phpt]
========DIFF========
001+ Fatal error: Uncaught Error: Class 'COMPersistHelper' not found in /srv/php/ext/com_dotnet/tests/bug79332.php:2
001- A com_exception has been thrown
002+ Stack trace:
003+ #0 {main}
004+ thrown in /srv/php/ext/com_dotnet/tests/bug79332.php on line 2
========DONE========
FAIL Bug #79332 (php_istreams are never freed) [ext/com_dotnet/tests/bug79332.phpt]
*After:*
Running selected tests.
SKIP Bug #79332 (php_istreams are never freed) [ext/com_dotnet/tests/bug79332.phpt] reason: com_dotnet extension not available
To cater to potentially state-dependent encodings, we have to reset the
conversion descriptor into its initial shift state to properly finish
the conversion. Furthermore, state-dependent encodings may not show
progress when comparing `in_left` before and after the conversion; we
rather have to see whether `out_left` has decreased. Also we have to
cater to the fact that the final potentially state resetting call does
not signal failure, but we still have to break respective loops
afterwards.
This is actually about three distinct issues:
* If an empty string is passed as $address to `stream_socket_sendto()`,
the `sa` is not initialized, so we must not pass it as `addr` to
`php_stream_xport_sendto()`.
* On POSIX, `recvfrom()` truncates messages which are too long to fit
into the specified buffer (unless `MSG_PEEK` is given), discards the
excessive bytes, and returns the buffer length. On Windows, the same
happens, but `recvfrom()` returns `SOCKET_ERROR` with the error code
`WSAEMSGSIZE`. We have to catch this for best POSIX compatibility.
* In `php_network_parse_network_address_with_port()`, we have to zero
`in6` (not only its alias `sa`) to properly support IPv6.
Co-Authored-By: Nikita Popov <nikita.ppv@googlemail.com>
Even though `SplStack::unserialize()` is not supposed to be called on
an already constructed instance, it is probably better if the method
clears the stack before actually unserializing.
Some commits missed to update the patch file, so we're catching up on
this.
To generally make this easier, we back-port generate_patch.sh from
PHP-7.4, where we now also generate magic.h from magic.h.in.
We have to free the `ansiname`s, regardless of whether they have been
put into the hashtable or not.
Since bug79299.phpt already shows the leak when run with a leak
checker, there is no need for another regression test.
Releasing the `com_dotnet_istream_wrapper` in `istream_destructor()` is
pointless, since `istream_destructor()` is only called when the
resource is going to be released. This recursion is not a real issue,
though, since the resource is never exposed to userland, and has at
most refcount 1, so due to well defined unsigned integer underflow, it
never is released twice. However, returning early in this case causes
a memory leak which needs to be fixed.
For obvious reasons, we must not assign a `size_t` value to an `int`
variable using memcpy(). However, there is actually no need for the
intermediate `n_sugg_st` here, if we use the proper types in the first
place.
A regression test is not necessary, because dict_suggest.phpt already
exhibits the erroneous behavior on big endian architectures.
While `mysqli_get_client_version()` calls `mysql_get_client_version()`
to retrieve the client version, `mysql::$client_version` is initialized
to `MYSQL_VERSION_ID`. Both should match though, and since the former
is the more useful information, we fix `mysql::$client_version`.
We do not add a regression test, because it would usually succeed
anyway, and we already have several tests with respective `assert()`s.
Always push the current user_error/exception_handler to the stack,
even when it is empty, so restore_error_handler() always works as
expected.
The user_error_handler is especially temporarily empty when we are inside
the error handler, which caused inconsistent behaviour before.
The fix for feature request #53466 did not properly handle resetting of
the corresponding statement; the problem with this is that the
statement does not know about its result sets. But even if we could
fix this, the `complete` handling still appears to be brittle, since
the `sqlite3_column_type()`docs[1] state:
| If the SQL statement does not currently point to a valid row, or if
| the column index is out of range, the result is undefined.
Fortunately, we can use `sqlite3_data_count()` instead, since[2]:
| If prepared statement P does not have results ready to return (via
| calls to the sqlite3_column() family of interfaces) then
| sqlite3_data_count(P) returns 0.
Thus, we guard `SQLite3::columnType()` with `sqlite3_data_count()`, and
completely drop updating the `php_sqlite3_result_object.complete`
field, but keep it for ABI BC purposes.
[1] <https://www.sqlite.org/c3ref/column_blob.html>
[2] <https://www.sqlite.org/c3ref/data_count.html>
Firstly, we must not rely on `stmt->column_count` when freeing the
driver specific column values, but rather store the column count in
the driver data. Since the column count is a `short`, 16 bit are
sufficient, so we can store it in reserved bits of `pdo_odbc_stmt`.
Furthermore, we must not allocate new column value storage when the
statement is not executed, but rather when the column value storage has
not been allocated.
Finally, we have to introduce a driver specific `cursor_closer` to
avoid that `::closeCursor()` calls `odbc_stmt_next_rowset()` which then
frees the column value storage, because it may be still needed for
bound columns.
* PHP-7.2:
Mark bug76348.phpt as online test
Fix bug #79082 - Files added to tar with Phar::buildFromIterator have all-access permissions
Fix bug #79221 - Null Pointer Dereference in PHP Session Upload Progress
To be able to see changes done only with `SetEnvironmentVariable()`, we
have to use `GetEnvironmentStrings()` instead of `environ`, because the
latter sees only changes done with `putenv()`.
For best backward compatibility we're using `GetEnvironmentStringsA()`;
switching to the wide string version likely makes sense for master,
though.
If the `VT_ARRAY` is empty, i.e. its upperbound is less than its lower
bound, we must not call `php_com_safearray_get_elem()`, because that
function throws in this case.
Because a `HRESULT` is a `LONG`[1], no special treatment is required on
x86 platforms to get appropriate values. On x64 platforms we prefer
positive values, what we could accomplish by casting the `HRESULT`
value to `ULONG` and then to `zend_long`, but since the current
behavior is correct and the performance improvement is negligible, we
defer that to master.
[1] <https://docs.microsoft.com/en-us/windows/win32/winprog/windows-data-types#hresult>
Not all systems support the discard protocol (TCP port 9), and since
there is no particular reason to use it, we switch to using actual
server testing.
The culprit is the too restrictive fix for bug #71536, which prevents
`php_libxml_streams_IO_write()` from properly executing when unclean
shutdown is flagged. A *more* suitable solution is to move the
`xmlwriter_free_resource_ptr()` call from the `free_obj` handler to an
added `dtor_obj` handler, to avoid to write to a closed stream in case
of late object freeing. This makes the `EG(active)` guard superfluous.
We also fix bug79029.phpt which has to use different variables for the
three parts to actually check the original shutdown issue.
Thanks to bwoebi and daverandom for helping to investigate this issue.
Since we're dealing with floating point numbers, precision issues may
hit us, and actually it's not necessary to check for the exact number
anyway, because it is not exact in the first place. Therefore, we
relax the test expectations.
We have to convert to number *before* detecting the type, to cater to
internal objects implementing `cast_object`.
We also get rid of the fallback behavior of using `FORMAT_TYPE_INT32`,
because that can no longer happen; after `convert_scalar_to_number_ex`
the type is either `IS_LONG` or `IS_DOUBLE`. We cater explicitly to
the `IS_ARRAY` case what also avoids triggering a type confusion when
`::TYPE_INT64` is passed as `$type`.
Unlink the current stack frame before freeing CVs or extra args.
This means it will no longer show up in back traces that are
generated during CV destruction.
We already did this prior to destructing the object/closure,
presumably for the same reason.
The fix for bug #49634 solved a double-free by copying the node with
`xmlDocCopyNodeList()`, but the copied node is later freed by calling
`xmlFreeNode()` instead of `xmlFreeNodeList()`, thus leaking memory.
However, there is no need to treat the node as node list, i.e. to copy
also the node's siblings; just creating a recursive copy of the node
with `xmlDocCopyNode()` is sufficient, while that also avoids the leak.
This is going to cause a segfault if reused in the next request.
To illustrate the issue, run these two scripts in sequence with
the built-in server:
// script1.php
mb_ereg_search_init('foobar');
mb_ereg_search('foo');
// script2.php
var_dump(mb_ereg_search_init("foobar"));
var_dump(mb_ereg_search_pos());
Adjust for URL change in XSD file and mark as online test.
Is it possible for use to store http://x-road.eu/xsd/xroad.xsd
locally instead? Do relative file system paths work here?
I'm not familiar with this.
In the buildconf and configure batch files, Windows' cscript utility was being
run without the /e:jscript flag. This works on systems that have not had the
default .js file association changed, but if .js has been re-associated to
(say) an IDE, the batch files fail with the error message:
Input Error: There is no script engine for file extension ".js".
This is a backport of fcdc0a6db0
to the PHP-7.3 branch. We need to make sure that OnUpdateString
is also called for a NULL value, otherwise the reset of the encoding
at the end of the request will not work.
I believe I already tried to land this before once, but it didn't
actually end up on the PHP-7.3 branch due to a push conflict that
I only noticed just now.
We use the portable {TMP} instead of the hard-coded /tmp, and skip
mysqli_debug_append.phpt on Windows, because unlinking the trace file
while the connection is still open won't work there.
(cherry picked from commit 60081ca20d)
We implement support for a fifth parameter, which allows to specify the
mapsize. The parameter defaults to zero, in which case the compiled in
default mapsize (usually 1048576) will be used. The mapsize should be
a multiple of the page size of the OS.
We check that the given microsecond fraction is in the valid range
[0, 1000000[, and otherwise mark it as invalid. We also drop the
useless do loop; a plain block is sufficient here.
We must not use the same shared memory OPcache instance for different
SAPIs, since their memory layout is different. To avoid this, we add
the SAPI name (truncated to at most 20 characters) to the names of the
memory base file, the mutex and the file mapping.
We backport the fix PHP 7.3, since this branch is affected as well.
(cherry picked from commit b5e0043796)
(cherry picked from commit e36daa6927)
(cherry picked from commit 2704ee6844)
Some functions in libmagic (distributed with fileinfo extension) perform this sequence of calls:
func() {
setlocale(LC_TYPE, "C")
.. do some work ..
setlocale(LC_TYPE, "")
}
It effectively resets LC_TYPE if it that was set before the function call.
To avoid manipulations with current locale at all, the problematic functions
were modified to use locale-independent functions.
Finally blocks in generators may be invoked during shutdown, in
which case we don't have a stack frame. Similar to what
zend_call_function does, we still need to rethrow these exceptions,
otherwise they will be hidden (and leak).
* PHP-7.2:
Fixed bug #78910Fix#78878: Buffer underflow in bc_shift_addsub
Fix test
Fix#78862: link() silently truncates after a null byte on Windows
Fix#78863: DirectoryIterator class silently truncates after a null byte
Since the constructor of DirectoryIterator and friends is supposed to
accepts paths (i.e. strings without NUL bytes), we must not accept
arbitrary strings.
Since we need `headers_lc` as well as `headers_trim` in the following,
we do not release the former even if they are the same string, to avoid
complicating the release logic even more.
A new test case is not necessary, since we already have
mail_basic_alt2-win32.phpt and others.
Due to former restrictions of the libcurl API, curl multipart/formdata
file uploads supported only proper files. However, as of curl 7.56.0
the new `curl_mime_*()` API is available (and already supported by
PHP[1]), which allows us to support arbitrary *seekable* streams, which
is generally desirable, and particularly resolves issues with the
transparent Unicode and long part support on Windows (see bug #77711).
Note that older curl versions are still supported, but CURLFile is
still restricted to proper files in this case.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=a83b68ba56714bfa06737a61af795460caa4a105>
(cherry picked from commit c68dc6b5e3)
As of curl 7.56.0, `curl_formadd()` is deprecated in favor of
`curl_mime_*()`, so we use the latter if available.
(cherry picked from commit a83b68ba56)
The "return" in the for loop should have been a break on the switch,
otherwise the result is just ignored... but because it prevents
evaluation of the other operand, it also violates the invariant that
everything has been constant evaluated, resulting in an assertion
failure.
The for loop isn't correct in any case though, because it's not legal
to determine the result based on just the second operand, as the
first one may have a side-effect that cannot be optimized away.
When normalizing tags to check whether they are contained in the set
of allowable tags, we must not strip slashes, unless they come
immediately after the opening `<`, or immediately before the closing
`>`.
If we're constructing extended-length paths (i.e. paths prefixed with
`\\?\`), we have to replace all forward slashes with backward slashes,
because the former are not supported by Windows for extended-length
paths.
The more efficient and likely cleaner alternative solution would be to
cater to this in `php_win32_ioutil_normalize_path_w()` by always
replacing forward slashes, but that might break existing code. It
might be sensible to change that for `master`, though.
This partially reverts commit c55d09c2f5,
because `MB_ONIGURUMA_VERSION` is only available as of PHP 7.4.0, so
that change made no sense for PHP-7.3; we keep it for PHP-7.4, though.
We also stick with the modification to bug78633.phpt.
Apparently, bug 78633 has now really been fixed; the former fix only
catered to the buffer overflow, but yielded a wrong result. Also,
the order of the named captures has been fixed.
Apparently, this has not been tested for a long time, and might be a
refactoring relict. Anyhow, we have to pass the context to
`GIFNextPixel` as well.
And `$x = !$x`
Noticed while working on GH-4912
The included test would not emit undefined variable errors in php 8.0
with opcache enabled. The command used:
```
php -d zend_extension=opcache.so --no-php-ini -d error_reporting=E_ALL \
-d opcache.file_cache= -d opcache.enable_cli=1 test.php
```
Opcache stores `opline->handler`s in shared memory. These pointers are
invalid, if the main PHP DLL is loaded at another base address due to
ASLR. We therefore store the address of `execute_ex` in the mmap base
file, and check on startup whether it matches its current address. If
not, we fall back on the file cache if enabled, and bail out otherwise.
This still does not address cases where the opline handler is located
inside of another DLL (e.g. for some profilers, debuggers), but there
seems to be no general solution for now.
(cherry picked from commit 8ba10b8fbc)
Clear the OpenSSL error queue before performing SSL stream operations.
As we don't control all code that could possibly be using OpenSSL,
we can't rely on the error queue being empty.
When getting the properties of a DatePeriod instance we have to retain
the proper classes, and when restoring a DatePeriod instance we have to
cater to DateTimeImmutable instances as well.
NULL out the execute_data before destroying it, otherwise GC may
trigger while the execute_data is partially destroyed, resulting
in double-frees.
The handling of call stack unfreezing is a bit awkward because it's
a ZEND_API function, so we can't change the signature.
`write_dimension` object handlers have to be able to handle `NULL`
`offset`s; for now we simply throw an exception instead of following
the `NULL` pointer.
A new function `pcre_get_compiled_regex_cache_ex()` is introduced,
which allows to compile regexp pattern using the "C" locale instead
of a current locale.
This will be needed to replace setlocale() usage in fileinfo,
which is not thread-safe.
This makes the stream opening actually fail, and avoids assertion
failures when we tokenize with EG(exception) set.
Also avoid throwing an additional warning after an exception has
already been thrown.
`remove_path` points to the given string, so we must not modify it.
Instead we use a duplicate, if we need the modification.
We may want to switch to `zend_string`s in master.
This originally manifested as a leak in oss-fuzz #18000. The following
is a reduced test case:
<?php
[
5 => 1,
"foo" > 1,
" " => "" == 0
];
<<<BAR
$x
BAR;
Because this particular error condition did not return T_ERROR,
EG(exception) was set while performing binary operation constant
evaluation, which checks exceptions for cast failures.
Instead of adding this indirect test case, I'm adding an assertion
that the lexer has to return T_ERROR if EG(exception) is set.
Print a more informative message that indicates that this is
likely a permission issue, and also indicate that pcre.jit=0
can be used to work around it.
Also automatically disable the JIT, so that this message is
only shown once.
See bug #78630.
stream_get-line repeatedly calls php_stream_fill_read_buffer until
enough data is accumulated in buffer. However, when stream contains
filters attached to it, then each call to fill buffer essentially
resets buffer read/write pointers and new data is written over old.
This causes stream_get_line to skip parts of data from stream
This patch fixes such behavior, so fill buffer call will append.
To retain legacy behavior I decided to add an option to control request
termination logic. If request_terminate_timeout_track_finished is set,
then request will be tracked for time limits even after
fastcgi_finish_request was called.
This patch depends on the fix provided in BUG 78469 (otherwise php-fpm
workers listening on named pipes on Windows will be erroneously terminated)
(PR #4636)
If count is ZEND_LONG_MIN the count-- loop underflows. This is
ultimately harmless, but results in a ubsan warning.
Fix this by adding a sanity check that the count isn't negative,
because that doesn't make sense...
This fixes two issues:
* Negative the value in an unsigned type to avoid signed overflow.
* Treat -0 as 0 rather than an invalid number that gets converted
to ZEND_LONG_MIN.
This fixes two leaks related to duplicate tags, as well as a leak
of zero-length FMT_(S)BYTE with non-null value. This can show up
for MAKERNOTE values where the original length is non-zero, but
the first character is a null byte.
mb_decode_numericentity() accepts a fourth optional parameter, which is
unused, however. Since this parameter doesn't do any harm, and to avoid
the small BC break, we're keeping this parameter for PHP 7, but adjust
the arginfo.
For PHP 8, we will remove this parameter.
This issue was recently introduced in c739023a50,
when the restriction that components>0 has been relaxed. We now need
to make sure that any tags that expect at least one component check
that this is the case.
This is intended to fix the primary issue from bug #77260.
Prior to macOS 10.14 multiple MAP_JIT segments were not permitted,
leading to mmap failures and corresponding "no more memory" errors
on macOS 10.13.
When calling free_result_buffers(), also free field metadata and
restore the mempool state to what it was before any allocations
have been made. Remove the mempool save/restore logic for the
inner result set as this is now handled on a higher level.
Using __COMPILER_HALF_OFFSET__ with trailing {} (OSS-Fuzz #17895)
--FILE--
<?php
__COMPILER_HALT_OFFSET__;
{}
--EXPECTF--
Warning: Use of undefined constant __COMPILER_HALT_OFFSET__ - assumed '__COMPILER_HALT_OFFSET__' (this will throw an Error in a future version of PHP) in %s on line %d
zend_throw_exception_ex(zend_ce_parse_error, 0, "Invalid body indentation level (expecting an indentation level of at least %d)", SCNG(heredoc_indentation));
Loaded 100 of 555 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Christoph M. Becker