In MariaDB-10.4.3 EXPIRE passwords where supported for
MariaDB. This only behaves like MySQL when the system
variable disconnect_on_expired_passwords=1.
MariaDB if there was no password it could not be considered
expired. So the test is adjusted to use actual passwords.
(MariaDB commit a94b20a8e0d9e64eeaabdaaa7a3e03fcdb8a686e)
The error codes produced my MariaDB are different
however still conforming to the SQL specification.
Closes GH-6480.
MySQL removed RENAME DATABASE in 18300001c1dbbfddf9a0adcbaeea68956102bdd0
(Sept 2007, 5.1.23). As this briefest existance is very insignificant lets remove it.
It also breaks when testing against MariaDB.
As the alternate path in this test covers all supported MySQL and MariaDB
versions and a signifant portion of unsupported versions lets keep it simple.
Closes GH-6459.
As of commit 81b2f3e[1], `parse_url()` accepts URLs with a zero port,
but does not report that port, what is wrong in hindsight.
Since the port number is stored as `unsigned short` there is no way to
distinguish between port zero and no port. For BC reasons, we thus
introduce `parse_url_ex2()` which accepts an output parameter that
allows that distinction, and use the new function to fix the behavior.
The introduction of `parse_url_ex2()` has been suggested by Nikita.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=81b2f3e5d9fcdffd87a4fcd12bd8c708a97091e1>
Closes GH-6399.
Unless `SQLGetData()` returns `SQL_SUCCESS` or `SQL_SUCCESS_WITH_INFO`,
the `StrLen_or_IndPtr` output argument is not guaranteed to be properly
set. Thus we handle retrieval failure other than `SQL_ERROR` by
yielding `false` for those column values and raising a warning.
Closes GH-6281.
This reverts commit bf6873a18e.
CVE-2020-26159 is bogus; the "bug" was apparently a false positive
reported by Coverity, and the "fix" apparently wrong, see
<https://github.com/kkos/oniguruma/issues/221>.
Closes GH-6357.
libxml2 has no particular issues parsing HTML strings with NUL bytes;
these just cause truncation of the current text content, but parsing
continues generally. Since `::loadHTMLFile()` already supports NUL
bytes, `::loadHTML()` should as well.
Note that this is different from XML, which does not allow any NUL
bytes.
Closes GH-6368.
A recent bug fix regarding symlinks claimed:
> After resolving reparse points, the path still may be a reparse
> point; in that case we have to resolve that reparse point as well.
While that is basically correct, some reparse points may point to
inaccessible system folders (e.g. `IO_REPARSE_TAG_DEDUP` points to
"\System Volume Information"). Since we don't know details about
arbitrary reparse points, and are mainly interested in nested symlinks,
we take a step back, and only resolve `IO_REPARSE_TAG_SYMLINK` for now.
Close GH-6354.
`ADD_EXTENSION_DEP()` relies on the `PHP_<extname>` config variables to
be set to `"yes"`, and since the standard and date extension are always
enabled, we define the respective variables uncoditionally.
Closes GH-6383.
"Uninitialized" here means that the object was created ordinarily
-- no constructor skipping involved. Most tidy methods seem to
handle this fine, but these three need to be guarded.
libc-client expects `TYPEMESSAGE` with an explicit subtype of `RFC822`
to have a `nested.msg` (otherwise there will be a segfault during
free), but not to have any `contents.text.data` (this will leak
otherwise).
Closes GH-6345.
In libc-client 2007f `data` is declared as `unsigned char *`; there may
be variants which declare it as `void *`, but in any case picky
compilers may warn about a pointer type mismatch in the conditional
(and error with `-W-error`), so we're adding a `char *` cast for good
measure.
The original fix for that bug[1] broke the formerly working composition
of message/rfc822 messages, which results in a segfault when freeing
the message body now. While `imap_mail_compose()` does not really
support composition of meaningful message/rfc822 messages (although
libc-client appears to support that), some code may still use this to
compose partial messages, and using string manipulation to create the
final message.
The point is that libc-client expects `TYPEMESSAGE` with an explicit
subtype of `RFC822` to have a `nested.msg` (otherwise there will be a
segfault during free), but not to have any `contents.text.data` (this
will leak otherwise).
[1] <http://git.php.net/?p=php-src.git;a=commit;h=0d022ddf03c5fabaaa22e486d1e4a367ed9170a7>
Closes GH-6343.
If unsupported `$search_criteria` are passed to `imap_sort()`, the
function returns an empty array, but there is also an error on the
libc-client error stack ("Unknown search criterion: UNSUPPORTED
(errflg=2)"). If, on the other hand, unsupported `$criteria` or
unsupported `$flags` are passed, the function returns `false`. We
solve this inconsistency by returning `false` for unsupported
`$search_criteria` as well.
Closes GH-6332.
Unless `topbod` is of `TYPEMULTIPART`, `mail_free_body()` does not free
the `nested.part`; while we could do this ourselves, instead we just
ignore additional bodies in this case, i.e. we don't attach them in the
first place.
Closes GH-6321.
If the RHS has INDIRECT elements, we do not those to be added to
the LHS verbatim. As we're using UPDATE_INDIRECT, we might even
create a nested INDIRECT that way.
This is a side-quest of oss-fuzz #26245.
We separate the input arrays and all sub-arrays to avoid modification
of the passed parameters.
This should be rewritten to use `zend_string`s for the "master" branch.
Closes GH-6316.
The documentation of `tidyNode::isHtml()` states that this method
"checks if a node is part of a HTML document". That is, of course,
nonsense, since a tidyNode is "an HTML node in an HTML file, as
detected by tidy."
What this method is actually supposed to do is to check whether a node
is an element (unless it is the root element). This has been broken by
commit d8eeb8e[1], which assumed that `enum TidyNodeType` would
represent flags of a bitmask, what it does not.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=d8eeb8e28673236bca3f066ded75037a5bdf6378>
Closes GH-6290.
There is no such thing as the "end of the unix epoch", and if it was,
it would certainly not be 2037-10-11T02:00:00. There is, however,
potential integer overflow which we need to avoid.
Closes GH-6288.
It is mandatory to pass either `SQL_NO_NULLS` or `SQL_NULLABLE` as
tenth parameter to `SQLSpecialColumns()`; otherwise the function call
fails. Therefore the user must be allowed to pass the desired value
as parameter to `odbc_specialcolumns()` again.
Closes GH-6200.
We have to log errors in `stream_opener` callbacks to the wrapper's
error log, because otherwise we may pick up an unrelated `errno` or a
most generic message.
Closes GH-6187.
libcurl 7.62.0 introduced a maximum protocol length of 8, so this test
case failed with `CURLE_URL_MALFORMAT`. While this is lifted to 40 as
of libcurl 7.65.0, and this test case has already been fixed with
commit e27301c[1], we restore the original intention to check for a
`CURLE_UNSUPPORTED_PROTOCOL ` error.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=e27301c7b37f6a1643a0dc1966919bd62a32bc74>
If restoring of any not registered built-in wrapper is requested, the
function is supposed to fail with a warning, so we have to check this
condition first.
Furthermore, to be able to detect whether a built-in wrapper has been
changed, it is not sufficient to check whether *any* userland wrapper
has been registered, but rather whether the specific wrapper has been
modified.
Closes GH-6183.
Passing `NULL` as `lpFileSizeHigh` to `GetFileSize()` gives wrong
results for files larger than 0xFFFFFFFF bytes. We fix this by using
`GetFileSizeEx()`, and let the mapping fail, if the file size is too
large for the architecture.
Closes GH-5319.
URIs with a 0 port are generally valid, so `parse_url()` should
recognize such URIs, but still report the port as missing.
Co-authored-by: twosee <twose@qq.com>
Closes GH-6152.
MariaDB versioning created a mess with regarding testing
features based on version. We sidestep the problem here
by assuming the extensions are present, and if a syntax
error occurs with a SQL mode TRANS_START_READ_WRITE |
TRANS_START_READ_ONLY enabled, then output the same
warning as before.
Travis on 7.3 is showing this error:
> The size of BLOB/TEXT data inserted in one transaction is greater
> than 10% of redo log size. Increase the redo log size using
> innodb_log_file_size.
Force MyISAM engine to avoid this.
There's two layers of packet splitting going on. First, packets
need to be split into having a payload of exactly 2^24-1 bytes or
being the last packet. If the split packet has size between 2^24-5
and 2^24-1 bytes, the compressed packets also needs to be split,
though the choice of split doesn't matter here. I'm splitting off
the first 8192 bytes, as that's what I observe libmysqlclient to be
doing.
Tested with:
* mysql-5.6.49-linux-glibc2.12-x86_64
* mysql-5.7.31-linux-glibc2.12-x86_64
* mysql-8.0.21-linux-glibc2.17-x86_64
* mariadb-10.5.6
configure --with-mysqli=/usr/local/$version/bin/mysql_config --with-pdo-mysql=/usr/local/$version
MySQL-8.0 removed my_bool
Some options where deprecated in mysql-8.0
MY_CHARSET_INFO used with exposed api mysql_get_character_set_info
rather than internal structures.
Add db2_execute() to the list of functions accessing the local
scope. Ideally the API wouldn't do that, but it seems most
pragmatic to address this on the opcache side at this point.
A recent commit[1] which fixed a memory leak introduced a regression
regarding the formerly liberal handling of IP addresses to bind to. We
fix this by reverting that commit, and fix the memory leak where it
actually occurs. In other words, this fix is less intrusive than the
former fix.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=0b8c83f5936581942715d14883cdebddc18bad30>
Closes GH-6104.
Modules may have changed after restart which can cause dangling pointers from custom opcode handlers in the second-level cache files. This fix includes the installed module names and versions in the accel_system_id hash as entropy. Closes GH-5836
Quoting from the bug report:
> The domain names passed to getmxrr() do not contain a trailing dot.
> DNS lookups which do not find records will (depending on the local
> resolver config) try again by adding the local domain to the end of
> the searched host/domain. In many environments there's an mx record
> for any subdomain of the local domain and the MX query will return
> a hit. But the test expects no hit. So the test fails when checking
> that "qa.php.net" does not have an MX record in DNS. In our local
> environment the resolver falls back to also check qa.php.net.kippdata.de
> which does have an MX record. Using "qa.php.net." instead of "qa.php.net"
> should fix this for everyone.
Do not decrement the refcount before allocating the new string,
as the allocation operation may bail out and cause a use-after-free
lateron. We can only decrement the refcount once the allocation
has succeeded.
Fixes oss-fuzz #25384.
php_parse_url() is intended to support strings that are not zero
terminated. We can't use strcspn in the implementation.
As we have two uses of strcspn, add a helper.
Use the general zend_generator_throw_exception() helper for this.
Otherwise we don't handle the off-by-one opline correctly (should
we maybe just stop doing that?)
This is a followup to ad750c3bb6,
which fixed a different yield from exception handling problem that
happened to show up in the same test case from oss-fuzz #25321.
Now both issues should be fixed.
There is a deeper underlying issue here, in that the opcodes violate
VM write-fetch safety, but let's fix the infinite loop first.
This fixes oss-fuzz #25352.
Added new flags that allow skipping param_evt(s) that are not used by drivers,
in a backwards and forward compatible manner. Updated the pgsql, mysql, sqlite
and oci drivers to properly use the new flags. I've left out pdo_dblib, which
doesn't have a param_hook, and pdo_firebird, which seems to be using
PARAM_EVT_NORMALIZE in a wrong context (param type vs event type).
Currently we only ever increment ifd_nesting_level, so this ends up
being a limit on the total number of IFD tags and we regularly get
bug reports of it being exceeded. I think the intention behind this
limit was to prevent recursion stack overflow, and for that we only
need to check actual recursive usage. I've implemented that here,
and dropped the nesting limit down to a smaller value
(which still passes our tests).
However, it seems that we do also need to have a total limit on
the number of tags, as we don't catch some instances of infinite
looping otherwise. Add this as a separate limit with a higher
value, that should hopefully be sufficient.
This is expected to fix a number of bugs:
https://bugs.php.net/bug.php?id=78083https://bugs.php.net/bug.php?id=78701https://bugs.php.net/bug.php?id=79907https://bugs.php.net/bug.php?id=80016
If the length is not -1, require it to be non-negative.
Using such lengths doesn't make sense (as only -1 is special-case
to read in chunks, anything else will end up doing a huge upfront
allocation) and can lead to string allocation overflow.
A similar check is already in place for file_get_contents(). That
one does not allow -1 (and uses null instead), but this function
is explicitly specified to accept -1, so stick to that behavior.
`ITypeInfo_GetIDsOfNames()` is supposed to fail with `E_NOTIMPL` for
out-of-process servers, thus we should not remove the already available
typeinfo of the object in this case.
We also properly free the `byref_vals`.
`tolower()` returns an `int`, so we must not convert to `char` which
may be `signed` and as such may be subject to overflow (actually,
implementation defined behavior).
Closes GH-6007
PDO driver constructors are throwing PdoException without setting
errorInfo, so create a new reusable function that throws exceptions
for PDO and will also set the errorInfo. Use this function in
pdo_mysql, pdo_sqlite, and pdo_pgsql.
Different manufacturer models may come with a
different endianness (motorola/intel) format. In
order to avoid a big refactor and a gigantic lookup
table, this commit simply attempts to switch the
endianness and proceed when values are acceptable.
Closes GH-5849.
Whether the type library is cached is actually irrelevant here; what
matters is that the symbols are imported, and since these are not
cached, we have to import them for every request. And we cannot cache
the symbols, because the import depends on the current codepage, but
the codepage is a `PHP_INI_ALL` setting.
We must not call `zend_list_delete()` in resource closer functions
exposed to userland, because decreasing the refcount there leads to
use-after-free scenarios. In this case, commit 4a42fbb worked for
typical use-cases where `xml_parser_free()` has been called exactly
once for the resource, because there is an internal zval (`->index`)
referencing the same resource which already increased the refcount by
one. However, when `xml_parser_free()` is called multiple times on the
same XML parser resource, the resource would be freed prematurely.
Instead we forcefully close the resource in `xml_parser_free()`. We
also could decrease the refcount of the resource there, but that would
require to call `xml_parser_free()` which is somewhat uncommon, and
would be particularly bad wrt. PHP 8 where that function is a NOP, and
as such doesn't have to be called. So we do no longer increase the
refcount of the resource when copying it to the internal zval, and let
the usualy refcounting semantics take care of the resource destruction.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=4a42fbbbc73aad7427aef5c89974d1833636e082>
These systems has two versions of the iovec interface dependent on
compiler flags passed, the legacy version causing little build issue.
Closes GH-5939.
Instead of storing the mapping base address and the address of
`execute_ex()` in a separate file in the temporary folder, we store
them right at the beginning of the memory mapping.
The file extension to mime type mapping *must* not depend on the file
extension's case for case-insensitive file systems, and *should* not
for case-sensitive file systems.
It does not make sense to make assumptions about `PHP_CONFIG_FILE_PATH`
during build time, since that value is never used during run time on
Windows. Since there is no `--with-config-file-path` on Windows
either, we define `PHP_CONFIG_FILE_PATH` as `""`.
This test fails occasionally due to timing issues, because the session
file may have been unlinked by the first `session_start()`'s GC. We
adapt the test expectation to this reality.
We must not mix multibyte and wide character strings in the
`COAUTHIDENTITY` structure. Using wide character strings throughout
would have the advantage that the remote connection can be established
regardless of the code page of the server, but that would more likely
break BC, so we just drop the wide character string conversion of the
username.
In the interest of avoiding side-effects during dumping, I'm
replacing the value with a <constant ast> string instead of
performing an update constant operation.
Fixes a use-after-free encountered in Symfony's SecurityBundle.
I don't have a reproducer for this, and believe the issue can only
occur if we leak an iterator (the leak is a separate issue).
We should not free the generator iterator here, because we do not
own it. The code that fetched the iterator is responsible for
releasing it. In the rare case where we do hit this code-path,
we cause a use-after-free.
A `BSTR` is similar to a `zend_string`; it stores the length of the
string just before the actual string, and thus the string may contain
NUL bytes. However, `php_com_olestring_to_string()` is supposed to
deal with arbitrary `OLECHAR*`s which may not be `BSTR`s, so we
introduce `php_com_bstr_to_string()` and use it for the only case where
we actually have to deal with `BSTR`s which may contain NUL bytes.
Contrary to `php_com_olestring_to_string()` we return a `zend_string`,
so we can save the re-allocation when converting to a `zval`.
We also cater to `php_com_string_to_olestring()` not being binary safe,
with basically the same fix we did for `php_com_olestring_to_string()`.
`atol()` returns a `long` which is not the same as `zend_long` on
LLP64; we use `ZEND_ATOL()` instead.
There is no need for a new test case, since filesize_large.phpt already
tests for that behavior; unfortunately, the FTP test suite relies on
`pcntl_fork()` and therefore cannot be run on Windows.
Even if the length of a maker note does not match our expectations
(either because the maker note is corrupted, or because our
expectations do not quite match reality), there is no need to let
parsing fail; we can still go on parsing the other meta information.
The `timercmp()` manpage[1] points out that some systems have a broken
implementation which does not support `>=`. This is definitely the
case for the Windows SDK, which only supports `<` and `>`.
[1] <https://linux.die.net/man/3/timercmp>
If the current character is a line break character, it cannot be a tab
or space character, so we would always fail with an invalid sequence
error. Obviously, these `scan_stat == 4` conditions are meant to be
exclusive.
Furthermore, if `in_pp == NULL || in_left_p == NULL` is true, we hit a
segfault if we are not returning right away. Obviously, the additional
constraints don't make sense, so we remove them.
As its name suggests, `sqlite3_data_count` returns the number of
columns in the current row of the result set; we are interested in the
number of columns regardless of the current row, so we have to use
`sqlite3_column_count` instead.
As of PHP 7.3.0, `sapi_cli_single_write()` is supposed to return `< 0`
on failure, but `fwrite()` returns a `size_t`, and signals error by
setting the stream's error indicator. We have to cater to that.
The color resolution is expected in bits 4-6 of the packed fields byte
of the logical screen descriptor (byte 10 of the GIF data stream),
according to the specification[1], section 18.
[1] <https://www.w3.org/Graphics/GIF/spec-gif89a.txt>
Since the member is not used in `OnUpdateEol()` that's not really an
issue, but still it's confusing to apparently have two INI settings
targeting the same member.
* PHP-7.2:
Fix#78876: Long variables cause OOM and temp files are not cleaned
Fix#78875: Long filenames cause OOM and temp files are not cleaned
Update NEWS for 7.2.31
Update CREDITS for PHP 7.2.30
Update NEWS for PHP 7.2.30
We must not cast `size_t` to `int` (unless the `size_t` value is
guaranteed to be less than or equal to `INT_MAX`). In this case we can
declare `array_len` as `size_t` in the first place.
We map the POSIX semantics of `IPC_PRIVATE` by creating unnamed file
mapping objects on Windows. While that is not particularly useful for
ext/shmop, which is the only bundled extension which uses `shmget()`,
it may be useful for external extensions.
The `start` parameter of `php_cgi_ini_activate_user_config` is supposed
to hold the byte offset of the doc root in the given `path`. However,
the current expression which fixes a potential type incompatibility
will ever only evaluate to zero or one, because it uses the *logical*
and operator (`&&`). Furthermore we notice that subtracting one from
`doc_root_len` is not necessary, so there is even no need for the
`start` parameter at all.
This is the change from GH-5417 but for FPM. This was stripping the
last character from the doc_root. Given how it is used, this should
be harmless, but let's make it less confusing...
I stumbled upon this while debugging a strange issue with
stream_socket_client() where it randomly throws out errors when
the connection timeout is set to below 1s. The logic to calculate
time difference in php_openssl_subtract_timeval() is wrong when
a.tv_usec < b.tv_usec, causing connection errors before the timeout
is reached.
We have to free the retrieved text content; to keep the code readable,
we extract a helper function to check for empty nodes. Unfortunately,
we cannot use xmlIsBlankNode(), because that also recognizes whitespace
only text content.
We also make sure to properly handle NULL returns from
xmlNodeGetContent().
This commit brings some substantial changes in behaviour due to the weird implementation.
This will be fixed in master due to BC concerns.
This reverts commit 1333b46d6d.
In commit a7305eb539 the last_message
field of the connection object was changed to be always non-persistent.
But there is a place on change_user path that still treats it
depending on conn->persistent flag. This will cause PHP crash after
com_change_user success when there is last_message set
The comment on `PS_VALIDATE_SID_FUNC(files)` is very clear that the
function is supposed to return `SUCCESS` if the session already exists.
So to detect a collision, we have to check for `SUCCESS`, not
`FAILURE`.
We also fix the wrong condition in session_regenerate_id() as well.
The skip message must start with the word 'skip', otherwise the test will not be skipped.
*Before:*
Running selected tests.
TEST 1/1 [ext/com_dotnet/tests/bug79332.phpt]
========DIFF========
001+ Fatal error: Uncaught Error: Class 'COMPersistHelper' not found in /srv/php/ext/com_dotnet/tests/bug79332.php:2
001- A com_exception has been thrown
002+ Stack trace:
003+ #0 {main}
004+ thrown in /srv/php/ext/com_dotnet/tests/bug79332.php on line 2
========DONE========
FAIL Bug #79332 (php_istreams are never freed) [ext/com_dotnet/tests/bug79332.phpt]
*After:*
Running selected tests.
SKIP Bug #79332 (php_istreams are never freed) [ext/com_dotnet/tests/bug79332.phpt] reason: com_dotnet extension not available
To cater to potentially state-dependent encodings, we have to reset the
conversion descriptor into its initial shift state to properly finish
the conversion. Furthermore, state-dependent encodings may not show
progress when comparing `in_left` before and after the conversion; we
rather have to see whether `out_left` has decreased. Also we have to
cater to the fact that the final potentially state resetting call does
not signal failure, but we still have to break respective loops
afterwards.
This is actually about three distinct issues:
* If an empty string is passed as $address to `stream_socket_sendto()`,
the `sa` is not initialized, so we must not pass it as `addr` to
`php_stream_xport_sendto()`.
* On POSIX, `recvfrom()` truncates messages which are too long to fit
into the specified buffer (unless `MSG_PEEK` is given), discards the
excessive bytes, and returns the buffer length. On Windows, the same
happens, but `recvfrom()` returns `SOCKET_ERROR` with the error code
`WSAEMSGSIZE`. We have to catch this for best POSIX compatibility.
* In `php_network_parse_network_address_with_port()`, we have to zero
`in6` (not only its alias `sa`) to properly support IPv6.
Co-Authored-By: Nikita Popov <nikita.ppv@googlemail.com>
Even though `SplStack::unserialize()` is not supposed to be called on
an already constructed instance, it is probably better if the method
clears the stack before actually unserializing.
Some commits missed to update the patch file, so we're catching up on
this.
To generally make this easier, we back-port generate_patch.sh from
PHP-7.4, where we now also generate magic.h from magic.h.in.
We have to free the `ansiname`s, regardless of whether they have been
put into the hashtable or not.
Since bug79299.phpt already shows the leak when run with a leak
checker, there is no need for another regression test.
Releasing the `com_dotnet_istream_wrapper` in `istream_destructor()` is
pointless, since `istream_destructor()` is only called when the
resource is going to be released. This recursion is not a real issue,
though, since the resource is never exposed to userland, and has at
most refcount 1, so due to well defined unsigned integer underflow, it
never is released twice. However, returning early in this case causes
a memory leak which needs to be fixed.
For obvious reasons, we must not assign a `size_t` value to an `int`
variable using memcpy(). However, there is actually no need for the
intermediate `n_sugg_st` here, if we use the proper types in the first
place.
A regression test is not necessary, because dict_suggest.phpt already
exhibits the erroneous behavior on big endian architectures.
While `mysqli_get_client_version()` calls `mysql_get_client_version()`
to retrieve the client version, `mysql::$client_version` is initialized
to `MYSQL_VERSION_ID`. Both should match though, and since the former
is the more useful information, we fix `mysql::$client_version`.
We do not add a regression test, because it would usually succeed
anyway, and we already have several tests with respective `assert()`s.
Always push the current user_error/exception_handler to the stack,
even when it is empty, so restore_error_handler() always works as
expected.
The user_error_handler is especially temporarily empty when we are inside
the error handler, which caused inconsistent behaviour before.
The fix for feature request #53466 did not properly handle resetting of
the corresponding statement; the problem with this is that the
statement does not know about its result sets. But even if we could
fix this, the `complete` handling still appears to be brittle, since
the `sqlite3_column_type()`docs[1] state:
| If the SQL statement does not currently point to a valid row, or if
| the column index is out of range, the result is undefined.
Fortunately, we can use `sqlite3_data_count()` instead, since[2]:
| If prepared statement P does not have results ready to return (via
| calls to the sqlite3_column() family of interfaces) then
| sqlite3_data_count(P) returns 0.
Thus, we guard `SQLite3::columnType()` with `sqlite3_data_count()`, and
completely drop updating the `php_sqlite3_result_object.complete`
field, but keep it for ABI BC purposes.
[1] <https://www.sqlite.org/c3ref/column_blob.html>
[2] <https://www.sqlite.org/c3ref/data_count.html>
Firstly, we must not rely on `stmt->column_count` when freeing the
driver specific column values, but rather store the column count in
the driver data. Since the column count is a `short`, 16 bit are
sufficient, so we can store it in reserved bits of `pdo_odbc_stmt`.
Furthermore, we must not allocate new column value storage when the
statement is not executed, but rather when the column value storage has
not been allocated.
Finally, we have to introduce a driver specific `cursor_closer` to
avoid that `::closeCursor()` calls `odbc_stmt_next_rowset()` which then
frees the column value storage, because it may be still needed for
bound columns.
* PHP-7.2:
Mark bug76348.phpt as online test
Fix bug #79082 - Files added to tar with Phar::buildFromIterator have all-access permissions
Fix bug #79221 - Null Pointer Dereference in PHP Session Upload Progress
To be able to see changes done only with `SetEnvironmentVariable()`, we
have to use `GetEnvironmentStrings()` instead of `environ`, because the
latter sees only changes done with `putenv()`.
For best backward compatibility we're using `GetEnvironmentStringsA()`;
switching to the wide string version likely makes sense for master,
though.
If the `VT_ARRAY` is empty, i.e. its upperbound is less than its lower
bound, we must not call `php_com_safearray_get_elem()`, because that
function throws in this case.
Because a `HRESULT` is a `LONG`[1], no special treatment is required on
x86 platforms to get appropriate values. On x64 platforms we prefer
positive values, what we could accomplish by casting the `HRESULT`
value to `ULONG` and then to `zend_long`, but since the current
behavior is correct and the performance improvement is negligible, we
defer that to master.
[1] <https://docs.microsoft.com/en-us/windows/win32/winprog/windows-data-types#hresult>
Not all systems support the discard protocol (TCP port 9), and since
there is no particular reason to use it, we switch to using actual
server testing.
The culprit is the too restrictive fix for bug #71536, which prevents
`php_libxml_streams_IO_write()` from properly executing when unclean
shutdown is flagged. A *more* suitable solution is to move the
`xmlwriter_free_resource_ptr()` call from the `free_obj` handler to an
added `dtor_obj` handler, to avoid to write to a closed stream in case
of late object freeing. This makes the `EG(active)` guard superfluous.
We also fix bug79029.phpt which has to use different variables for the
three parts to actually check the original shutdown issue.
Thanks to bwoebi and daverandom for helping to investigate this issue.
Since we're dealing with floating point numbers, precision issues may
hit us, and actually it's not necessary to check for the exact number
anyway, because it is not exact in the first place. Therefore, we
relax the test expectations.
We have to convert to number *before* detecting the type, to cater to
internal objects implementing `cast_object`.
We also get rid of the fallback behavior of using `FORMAT_TYPE_INT32`,
because that can no longer happen; after `convert_scalar_to_number_ex`
the type is either `IS_LONG` or `IS_DOUBLE`. We cater explicitly to
the `IS_ARRAY` case what also avoids triggering a type confusion when
`::TYPE_INT64` is passed as `$type`.
Unlink the current stack frame before freeing CVs or extra args.
This means it will no longer show up in back traces that are
generated during CV destruction.
We already did this prior to destructing the object/closure,
presumably for the same reason.
The fix for bug #49634 solved a double-free by copying the node with
`xmlDocCopyNodeList()`, but the copied node is later freed by calling
`xmlFreeNode()` instead of `xmlFreeNodeList()`, thus leaking memory.
However, there is no need to treat the node as node list, i.e. to copy
also the node's siblings; just creating a recursive copy of the node
with `xmlDocCopyNode()` is sufficient, while that also avoids the leak.
This is going to cause a segfault if reused in the next request.
To illustrate the issue, run these two scripts in sequence with
the built-in server:
// script1.php
mb_ereg_search_init('foobar');
mb_ereg_search('foo');
// script2.php
var_dump(mb_ereg_search_init("foobar"));
var_dump(mb_ereg_search_pos());
Adjust for URL change in XSD file and mark as online test.
Is it possible for use to store http://x-road.eu/xsd/xroad.xsd
locally instead? Do relative file system paths work here?
I'm not familiar with this.
In the buildconf and configure batch files, Windows' cscript utility was being
run without the /e:jscript flag. This works on systems that have not had the
default .js file association changed, but if .js has been re-associated to
(say) an IDE, the batch files fail with the error message:
Input Error: There is no script engine for file extension ".js".
This is a backport of fcdc0a6db0
to the PHP-7.3 branch. We need to make sure that OnUpdateString
is also called for a NULL value, otherwise the reset of the encoding
at the end of the request will not work.
I believe I already tried to land this before once, but it didn't
actually end up on the PHP-7.3 branch due to a push conflict that
I only noticed just now.
We use the portable {TMP} instead of the hard-coded /tmp, and skip
mysqli_debug_append.phpt on Windows, because unlinking the trace file
while the connection is still open won't work there.
(cherry picked from commit 60081ca20d)
We implement support for a fifth parameter, which allows to specify the
mapsize. The parameter defaults to zero, in which case the compiled in
default mapsize (usually 1048576) will be used. The mapsize should be
a multiple of the page size of the OS.
We check that the given microsecond fraction is in the valid range
[0, 1000000[, and otherwise mark it as invalid. We also drop the
useless do loop; a plain block is sufficient here.
We must not use the same shared memory OPcache instance for different
SAPIs, since their memory layout is different. To avoid this, we add
the SAPI name (truncated to at most 20 characters) to the names of the
memory base file, the mutex and the file mapping.
We backport the fix PHP 7.3, since this branch is affected as well.
(cherry picked from commit b5e0043796)
(cherry picked from commit e36daa6927)
(cherry picked from commit 2704ee6844)
Some functions in libmagic (distributed with fileinfo extension) perform this sequence of calls:
func() {
setlocale(LC_TYPE, "C")
.. do some work ..
setlocale(LC_TYPE, "")
}
It effectively resets LC_TYPE if it that was set before the function call.
To avoid manipulations with current locale at all, the problematic functions
were modified to use locale-independent functions.
Finally blocks in generators may be invoked during shutdown, in
which case we don't have a stack frame. Similar to what
zend_call_function does, we still need to rethrow these exceptions,
otherwise they will be hidden (and leak).
* PHP-7.2:
Fixed bug #78910Fix#78878: Buffer underflow in bc_shift_addsub
Fix test
Fix#78862: link() silently truncates after a null byte on Windows
Fix#78863: DirectoryIterator class silently truncates after a null byte
Since the constructor of DirectoryIterator and friends is supposed to
accepts paths (i.e. strings without NUL bytes), we must not accept
arbitrary strings.
Since we need `headers_lc` as well as `headers_trim` in the following,
we do not release the former even if they are the same string, to avoid
complicating the release logic even more.
A new test case is not necessary, since we already have
mail_basic_alt2-win32.phpt and others.
Due to former restrictions of the libcurl API, curl multipart/formdata
file uploads supported only proper files. However, as of curl 7.56.0
the new `curl_mime_*()` API is available (and already supported by
PHP[1]), which allows us to support arbitrary *seekable* streams, which
is generally desirable, and particularly resolves issues with the
transparent Unicode and long part support on Windows (see bug #77711).
Note that older curl versions are still supported, but CURLFile is
still restricted to proper files in this case.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=a83b68ba56714bfa06737a61af795460caa4a105>
(cherry picked from commit c68dc6b5e3)
As of curl 7.56.0, `curl_formadd()` is deprecated in favor of
`curl_mime_*()`, so we use the latter if available.
(cherry picked from commit a83b68ba56)
The "return" in the for loop should have been a break on the switch,
otherwise the result is just ignored... but because it prevents
evaluation of the other operand, it also violates the invariant that
everything has been constant evaluated, resulting in an assertion
failure.
The for loop isn't correct in any case though, because it's not legal
to determine the result based on just the second operand, as the
first one may have a side-effect that cannot be optimized away.
When normalizing tags to check whether they are contained in the set
of allowable tags, we must not strip slashes, unless they come
immediately after the opening `<`, or immediately before the closing
`>`.
If we're constructing extended-length paths (i.e. paths prefixed with
`\\?\`), we have to replace all forward slashes with backward slashes,
because the former are not supported by Windows for extended-length
paths.
The more efficient and likely cleaner alternative solution would be to
cater to this in `php_win32_ioutil_normalize_path_w()` by always
replacing forward slashes, but that might break existing code. It
might be sensible to change that for `master`, though.
This partially reverts commit c55d09c2f5,
because `MB_ONIGURUMA_VERSION` is only available as of PHP 7.4.0, so
that change made no sense for PHP-7.3; we keep it for PHP-7.4, though.
We also stick with the modification to bug78633.phpt.
Apparently, bug 78633 has now really been fixed; the former fix only
catered to the buffer overflow, but yielded a wrong result. Also,
the order of the named captures has been fixed.
Apparently, this has not been tested for a long time, and might be a
refactoring relict. Anyhow, we have to pass the context to
`GIFNextPixel` as well.
And `$x = !$x`
Noticed while working on GH-4912
The included test would not emit undefined variable errors in php 8.0
with opcache enabled. The command used:
```
php -d zend_extension=opcache.so --no-php-ini -d error_reporting=E_ALL \
-d opcache.file_cache= -d opcache.enable_cli=1 test.php
```
Opcache stores `opline->handler`s in shared memory. These pointers are
invalid, if the main PHP DLL is loaded at another base address due to
ASLR. We therefore store the address of `execute_ex` in the mmap base
file, and check on startup whether it matches its current address. If
not, we fall back on the file cache if enabled, and bail out otherwise.
This still does not address cases where the opline handler is located
inside of another DLL (e.g. for some profilers, debuggers), but there
seems to be no general solution for now.
(cherry picked from commit 8ba10b8fbc)
Clear the OpenSSL error queue before performing SSL stream operations.
As we don't control all code that could possibly be using OpenSSL,
we can't rely on the error queue being empty.
When getting the properties of a DatePeriod instance we have to retain
the proper classes, and when restoring a DatePeriod instance we have to
cater to DateTimeImmutable instances as well.
NULL out the execute_data before destroying it, otherwise GC may
trigger while the execute_data is partially destroyed, resulting
in double-frees.
The handling of call stack unfreezing is a bit awkward because it's
a ZEND_API function, so we can't change the signature.
`write_dimension` object handlers have to be able to handle `NULL`
`offset`s; for now we simply throw an exception instead of following
the `NULL` pointer.
A new function `pcre_get_compiled_regex_cache_ex()` is introduced,
which allows to compile regexp pattern using the "C" locale instead
of a current locale.
This will be needed to replace setlocale() usage in fileinfo,
which is not thread-safe.
This makes the stream opening actually fail, and avoids assertion
failures when we tokenize with EG(exception) set.
Also avoid throwing an additional warning after an exception has
already been thrown.
`remove_path` points to the given string, so we must not modify it.
Instead we use a duplicate, if we need the modification.
We may want to switch to `zend_string`s in master.
This originally manifested as a leak in oss-fuzz #18000. The following
is a reduced test case:
<?php
[
5 => 1,
"foo" > 1,
" " => "" == 0
];
<<<BAR
$x
BAR;
Because this particular error condition did not return T_ERROR,
EG(exception) was set while performing binary operation constant
evaluation, which checks exceptions for cast failures.
Instead of adding this indirect test case, I'm adding an assertion
that the lexer has to return T_ERROR if EG(exception) is set.
Print a more informative message that indicates that this is
likely a permission issue, and also indicate that pcre.jit=0
can be used to work around it.
Also automatically disable the JIT, so that this message is
only shown once.
See bug #78630.
stream_get-line repeatedly calls php_stream_fill_read_buffer until
enough data is accumulated in buffer. However, when stream contains
filters attached to it, then each call to fill buffer essentially
resets buffer read/write pointers and new data is written over old.
This causes stream_get_line to skip parts of data from stream
This patch fixes such behavior, so fill buffer call will append.
To retain legacy behavior I decided to add an option to control request
termination logic. If request_terminate_timeout_track_finished is set,
then request will be tracked for time limits even after
fastcgi_finish_request was called.
This patch depends on the fix provided in BUG 78469 (otherwise php-fpm
workers listening on named pipes on Windows will be erroneously terminated)
(PR #4636)
If count is ZEND_LONG_MIN the count-- loop underflows. This is
ultimately harmless, but results in a ubsan warning.
Fix this by adding a sanity check that the count isn't negative,
because that doesn't make sense...
This fixes two issues:
* Negative the value in an unsigned type to avoid signed overflow.
* Treat -0 as 0 rather than an invalid number that gets converted
to ZEND_LONG_MIN.
This fixes two leaks related to duplicate tags, as well as a leak
of zero-length FMT_(S)BYTE with non-null value. This can show up
for MAKERNOTE values where the original length is non-zero, but
the first character is a null byte.
mb_decode_numericentity() accepts a fourth optional parameter, which is
unused, however. Since this parameter doesn't do any harm, and to avoid
the small BC break, we're keeping this parameter for PHP 7, but adjust
the arginfo.
For PHP 8, we will remove this parameter.
This issue was recently introduced in c739023a50,
when the restriction that components>0 has been relaxed. We now need
to make sure that any tags that expect at least one component check
that this is the case.
This is intended to fix the primary issue from bug #77260.
Prior to macOS 10.14 multiple MAP_JIT segments were not permitted,
leading to mmap failures and corresponding "no more memory" errors
on macOS 10.13.
When calling free_result_buffers(), also free field metadata and
restore the mempool state to what it was before any allocations
have been made. Remove the mempool save/restore logic for the
inner result set as this is now handled on a higher level.
The state returned by `sodium_crypto_generichash_init()` has to be
regarded as opaque byte string; neither its size nor its exact
structure are fixed, and actually vary for diffent libsodium versions.
Therefore we drop the test altogether.
When stored procedures are called, the "final result set is a status
result that includes no result set". Calling `::nextRowset()` on the
actual last result set should return FALSE, since there is actually no
further result set to be processed.
It can return false if the resource type is wrong.
```
php > var_export(hash_update_stream(hash_init('md5'),
imagecreate(1,1)));
Warning: hash_update_stream(): supplied resource is not a valid stream
resource in php shell code on line 1
false
```
The return types were initially added in
c88ffa9a56
fcgi_accept_request function is supposed to call a FastCGI implementation's
on_accept hook when entering an "accepting" stage (that is right before
calling "accept"). This hook implementation (fpm_request_accepting) updates
a worker state to an "accepting" state which is effectively an "Idle" state,
and updates counters on the scoreboard of the corresponding pool (idle++,
active--).
But this is not done when listening for client connections on a named pipe on
Windows platform. In that case a combination of
ConnectNamedPipe/WaitForSingleObject is used (to be able to catch in_shutdown
as far as I understand), but it is nonetheless functionally equivalent to
"accept" call. Also by not calling on_hook neither a worker's state is updated
to "accepting" state nor scoreboard counters are updated.
The properties HT may be a GC root itself, so we need to remove it.
I'm not sure this issue actually applies to PHP 7.2, but committing
it there to be safe. As seen from the test case, the handling here
is rather buggy on 7.2.
This can also return an array. See
https://www.php.net/manual/en/function.time-nanosleep.php#refsect1-function.time-nanosleep-returnvalues
> If the delay was interrupted by a signal, an associative array will be
returned with the components:
>
> - seconds - number of seconds remaining in the delay
> - nanoseconds - number of nanoseconds remaining in the delay
Sending a SIGUSR1 to the below program would trigger this behavior.
```
pcntl_signal(\SIGUSR1, function ($signo, $signinfo) {
echo "Handling a signal $signo\n";
});
echo "Sleeping for 100 seconds\n";
var_export(time_nanosleep(100, 0));
```
The incomplete signature existed since c88ffa9a5.
No phpt tests existed for time_nanosleep returning an array
Due to overflows in the memory limit checks, we were missing cases
where the allocation size was close to the address space size, and
caused an OOM condition rather than a memory limit error.
As of PHP 7.3.0, the rules regarding the heredoc and nowdoc closing
identifier have been relaxed. While formerly, the closing identifier
was required to be placed at the beginning of a line and to be
immediately followed by (a semicolon and) a line break, it may now be
preceeded by whitespace, and may be followed by any non-word character.
We adjust the recognition logic respectively.
As of Windows 1903, when the OneDrive on-demand feature is enabled, the
OneDrive folder is reported as reparse point by `FindFirstFile()`, but
trying to get information about the reparse point using
`DeviceIoControl()` fails with `ERROR_NOT_A_REPARSE_POINT`. We work
around this problem by falling back to `GetFileInformationByHandle()`
if that happens, but only if the reparse point is reported as cloud
reparse point, and only if PHP is running on Windows 1903 or later.
The patch has been developed in collaboration with ab@php.net.
We should keep an eye on the somewhat quirky OneDrive behavior, since
it might change again in a future Windows release.
In PHP 7.3 shadow properties are no longer duplicated. Make sure we
only release them if the property was defined on the parent class,
which means that it changed from private->shadow, which is where
duplication does happen.
This is likely going to end up interned lateron at some point
when the new_name is referenced somewhere. However, it may be
that there are some uses that do not get interned before that.
In this case we will intern a string that already have zval
users, without updating the refcounted flag on those zvals.
In particular this can happen with something like [Foo::class],
where Foo is an imported symbol. The string it resolves to won't
get interned right away, but may be interned later.
use Foo as Bar;
$x = [Bar::class];
var_dump(Bar::X);
debug_zval_dump($x); // Will show negative refcount
class Foo {
const X = 1;
}
However, this doesn't really fix the root cause, there are probably
other situations where something similar can occur.
The fix for bug #78241 assumed that `time_t` would always be 64bit, but
actually is 32bit for x86. We therefore enforce 64bit arithmetic to
avoid wrapping.
(cherry picked from commit bf242d58e7)
When the strip tags state machine has been flattened, an if statement
has mistakenly been treated as else if. We fix this, and also simplify
a bit right away.
We have to properly clean up in case phar_flush() is failing.
We also make the expectation of the respective test case less liberal
to avoid missing such bugs in the future.
There are a few parts here:
* opcache should not be blocking signals while invoking compile_file,
otherwise signals may remain blocked on a compile error. While at
it, also protect SHM memory during compile_file.
* We should deactivate Zend signals at the end of the request, to make
sure that we gracefully recover from a missing unblock and signals
don't remain blocked forever.
* We don't use a critical section in deactivation, because it should
not be necessary. Additionally we want to clean up the signal queue,
if it is non-empty.
* Enable SIGG(check) in debug builds so we notice issues in the future.
The smart branch logic assumed b->start refers to the old offsets,
while b->start was already adjusted to the new offsets at this
point. Delay the change until later.
epoll event backend does not guarantee that child input/output events
are reported before SIGCHILD due to finished worker. While a bunch of
events received by epoll is being processed, child-related structures
may be removed before dispatching of an I/O event for the same child.
The result may be attempt to access to memory region allocated for
another purpose, segfault of the master process, and unavailable web
sites.
Postpone processing of SIGCHILD events till other events in the same
bunch are processed.
Fix Bug #62418 php-fpm master process crashes
Fix Bug #65398 Race condition between SIGCHLD and child stdout/stderr event leads to segfault
Fix Bug #75112 php-fpm crashing, hard to reproduce
Fix Bug #77114 php-fpm master segfaults in fpm_event_epoll_wait/fpm_event_fire
Fix Bug #77185 Use-after-free in FPM master event handling
1. falls in an infinite loop because PHP engine's inconsistent state, now override the ITIMER_PROF to 0.1 second, clean shutdown must finish before that.
2. generate too much error log, we completely disable "error_reporting" before calling php_request_shutdown().
New opcache directives have been added recently which are returned
if using `ini_get_all('zend opcache')` but are not listed in the
directives if using `opcache_get_configuration()`. This fix adds
those missing directives as well as if `opcache.mmap_base` is used
instead of `opcache.lockfile_path`. Also adds a test to ensure the
directives match with both methods of fetching.
When cleaning nops in the dfa pass, we were always keeping the
smart branch inhibiting nop that occurs directly before the jump
instruction. However, as we skip unreachable blocks entirely, it
may happen that we need to keep a nop that occurs further back,
prior to the unreachable blocks. Account for that case now.
We should really do something about the smart branch situation,
this is very fragile...
`time_t` defaults to `_time64` (which is 64bit signed) even on x86, but
`Int32x32To64()` truncates it to signed 32bit. We replace the macro
with the "manual" calculation.
opcache incorrectly handles PHAR files when opcache.validate_permission
option enabled, because it calls
access("phar://path-to/file.phar/path/inside.php", R_OK);
rather than
access("path-to/file.phar", R_OK)
This test is easily tripped by former test runs with other PHP
versions. To avoid such false positives, we check that there is at
least one respective OPcache file, and that all found OPcache user ID
folders have exactly 32 hexadecimal digits.
Fails for me locally due to different number of warnings with
different messages. Rather than adding more wildcards I'm dropping
this test entirely, as it doesn't seem to test anything particularly
useful.
(cherry picked from commit 84333cad67)
With opcache.protect_memory=1 enabled, the XML-RPC extension causes a
segfault on PHP 7.2 as it is modifying the recursion counter of objects
it touches, without first checking if they are immutable or not.
This doesn't affect 7.3+
The result of zval_get_string() needs to be released. In some places
where it is inconvenient to manage, I went back to convert_to_string.
It is safe in those places due to existing array separations.
Also fix a preexisting leak when getting controls, the previous
value was not destroyed.
Also add PHP_TEST_EXTRA_ARGS environment variable, which allows
to pass on -c, -d etc flags provided by run-tests.php. Otherwise
we won't get the built-in server to run with opcache.
mysqli has an uncommon approach to 64-bit compatibility:
it will convert numbers that can't be represented on 32-bit
platforms to a string.
This is documented at
https://www.php.net/manual/en/mysqli-stmt.affected-rows.php#refsect1-mysqli-stmt.affected-rows-returnvalues
So if there's a query to a remote mysqli server that affects
more than 2.2 billion rows, then the opcache inference might be
incorrect.
(It's possible to add a MAY_BE_STRING_ON_32_BIT_PLATFORM bitflag macro to
account for this, but I don't think there's a need or want to?)
Patches 3162285b86
This is based on the list of php 7.4 functions using
MYSQLI_RETURN_LONG_INT in mysqli_api.c
https://www.php.net/manual/en/mysqli.get-charset.php
tests/mysqli_field_seek.phpt has a test of this returning an object.
Looking at the source in ext/mysqli/mysqli_nonapi.c,
this should be object|null, not array|null
This might actually cause bugs in opcache's inferences,
(no proof of this)
so it might make sense to pull this patch into an earlier minor version.
Using __COMPILER_HALF_OFFSET__ with trailing {} (OSS-Fuzz #17895)
--FILE--
<?php
__COMPILER_HALT_OFFSET__;
{}
--EXPECTF--
Warning: Use of undefined constant __COMPILER_HALT_OFFSET__ - assumed '__COMPILER_HALT_OFFSET__' (this will throw an Error in a future version of PHP) in %s on line %d
zend_throw_exception_ex(zend_ce_parse_error, 0, "Invalid body indentation level (expecting an indentation level of at least %d)", SCNG(heredoc_indentation));
Loaded 100 of 821 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Stanislav Malyshev