Like `mail()` and `mb_send_mail()`, `imap_mail_compose()` must prevent
header injection. For maximum backward compatibility, we still allow
header folding for general headers, and still accept trailing line
breaks for address lists.
Function info for curl_exec() incorrect specified that the
function cannot return true. This is already fixed in PHP 8,
as the func info entry was removed there.
We use the proper type, and make sure that no overflow can occur by
using `safe_emalloc()` (we can assume that neither string length is
`SIZE_MAX`).
Closes GH-6845.
When encountering the following SSA graph:
BB1:
#2.T1 [string] = COALESCE #1.CV0($str) [null, string] BB2
BB2:
#5.T1 [string] = QM_ASSIGN string("")
BB3:
#7.X1 [string] = Phi(#2.X1 [string], #5.X1 [string])
FREE #7.T1 [string]
We would currently determine that #7, #5 are dead, and eliminate
the FREE and QM_ASSIGN. However, we cannot eliminate #2, as
COALESCE is also responsible for control flow.
Fix this my marking all non-CV phis as live to start with. This
can be relaxed to check the kind of the source instruction, but
I couldn't immediately come up with a case where it would be
useful.
I suspect this is the cause for our recent CI failures. Apparently,
on macos it is possible for getgroups() to return more than
NGROUPS_MAX groups. We avoid an EINVAL in that case by fetching
the exact number of groups in advance. This should work on both
macos and posix systems.
When `SSL_read()` after `SSL_shutdown()` fails with `SSL_ERROR_SYSCALL`,
we should not warn about this, because it is likely caused by the peer
having closed the connection without having sent a close_notify
shutdown alert.
Signed-off-by: Christoph M. Becker <cmbecker69@gmx.de>
Closes GH-6803.
I found this mainly to be a problem when working with threading
extensions. zbacktrace doesn't show the correct stack when switching
threads.
Closes GH-6814.
`xmlNewNs()` does not XML encode the passed `href`, so we need to do
that manually.
Closes GH-6804.
Signed-off-by: Christoph M. Becker <cmbecker69@gmx.de>
We need to do that in case a user handler has been set. However, we
can't do that in `php_rinit_session_globals()` since that function is
called by PHP function `session_destroy()` too, but in that case we
don't want to reset PS(mod).
Closes GH-6795.
`session_set_save_handler()` may be called with callables instead of an
object; we need to cater to that as well.
We also extract a set_user_save_handler_ini() function to avoid code
duplication.
Closes GH-6796.
There is no need to require a (valid) save_handler to be set, when a
user handler is supposed to be set. We just have to make sure, that
no user handler is already set in this case.
Closes GH-6788.
It is not guaranteed, that the driver inserts only a single NUL byte at
the end of the buffer. Apparently, there is no way to find out the
actual data length in the buffer after calling `SQLGetData()`, so we
adjust after the next `SQLGetData()` call.
We also prevent PDO::ODBC_ATTR_ASSUME_UTF8 from fetching garbage, by
fetching all chunks with the same C type.
Closes GH-6716.
The compile context is shared between patterns, so we need to set
the character tables unconditionally in case we switched from
a non-C locale to the C locale.
According to the DOM standard, elements may only contain element, text,
processing instruction and comment nodes[1]. It is also specified that
a HierarchyRequestError should be thrown if a document is to be
inserted[2]. We follow that standard, and prevent the use-after-free
this way.
[1] <https://dom.spec.whatwg.org/#node-trees>
[2] <https://dom.spec.whatwg.org/#mutation-algorithms>
Closes GH-6765.
The `encoding` attribute of the XML declaration is optional; it is good
practice to use external encoding information where available if it is
missing. Thus, we check for `charset` info of `Content-Type` headers,
and see whether the encoding is supported.
We cater to trailing parameters and quoted-strings, but not to escaped
backslashes and quotes in quoted-strings, since no known character
encoding contains these anyway.
Co-authored-by: Michael Wallner <mike@php.net>
Closes GH-6747.
This issue came up recently in a bug report[1]; without the error code,
users can barely guess why the function failed.
[1] <https://bugs.php.net/80812>
Closes GH-6745.
When opening HTTP streams, and reading the headers, we currently
discard header lines longer than `HTTP_HEADER_BLOCK_SIZE` (1024 bytes).
While this is not generally forbidden by RFC 7230, section 3.2.5, it
is not generally allowed either, since that may change the "message
framing or response semantics".
We thus fix this by allowing arbitrarily long header lines.
Closes GH-6720.
So far, `SendText()` simply separates potential email address lists at
any comma, disregarding that commas inside a quoted-string do not
delimit addresses. We fix that by introducing an own variant of
`strtok_r()` which caters to quoted-strings.
We also make `FormatEmailAddress()` aware of quoted strings.
We do not cater to email address comments, and potentially other quirks
of RFC 5322 email addresses, but catering to quoted-strings is supposed
to solve almost all practical use cases.
Co-authored-by: Nikita Popov <nikita.ppv@gmail.com>
Closes GH-6735.
The lack of such a check leads to false-passes of tests on Windows
which expect no output, but produce a segfault or similar issue. I
discovered this a while ago due to bad tests in an extension I maintain.
Closes GH-6722.
When no test paths are specified this shows up when 'make test' is used on a PECL extension without specifying tests to run (or in php-src too, I guess...)
Closes GH-6717.
First, the `bzip2.compress` filter has the same issue as `zlib.deflate`
so we port the respective fix[1] to ext/bz2.
Second, there is still an issue, if a stream with an attached
compression filter is flushed before it is closed, without any writes
in between. In that case, the compression is never finalized. We fix
this by enforcing a `_php_stream_flush()` with the `closing` flag set
in `_php_stream_free()`, whenever a write filter is attached. This
call is superfluous for most write filters, but does not hurt, even
when it is unnecessary.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=20e75329f2adb11dd231852c061926d0e4080929>
Closes GH-6703.
zend_find_array_dim_slow() may throw, make sure to handle this.
This backports the code we already use for this on PHP-8.0,
and also backports an exception check that makes this easier to
catch.
Rather than segfaulting because sname is missing lateron, report
a FAIL here. As this indicates a server bug, the errors is reported
as an out of band warning, rather than a client error.
This fixes the PHP side of bug #80713.
openssl_pkey_new() fetches various options from the config file --
most of these are optional, and not specifying them is not an error
condition from the perspective of the user. Unfortunately, the
CONF_get_string() API pushes an error when accessing a key that
doesn't exist (_CONF_get_string does not, but that is presumably a
private API). This commit adds a helper php_openssl_conf_get_string()
that automatically clears the error in this case. I've found that
OpenSSL occasionally does the same thing internally:
https://github.com/openssl/openssl/blob/22040fb790c854cefb04bed98ed38ea6357daf83/apps/req.c#L515-L517
Closes GH-6699.
We need to first clean the symtable and then check whether a cache
slot is available for it. Otherwise, it may happen that a destructor
runs while cleaning the table and uses up all the remaining slots
in the cache.
This is particularly insidious because once we overflow the cache,
the first pointer we modify is symtable_cache_ptr, making it hard
to understand what happened after the fact.
Fixes oss-fuzz #30815.
The PAM service requires the terminating null to be part
of the communication.
Tested with MariaDB-10.4(pam) and Percona Server 5.7.32(auth_pam_compat).
Also changed MySQL Enterprise test to the server side plugin, authentication_pam
as opposed to the client plugin mysql_clear_password.
Add additional check for pamtest user and pam service file as
all are required for the test.
More importantly, test result should actually succeed.
Thanks Geoff Montee for bug report.
Closes GH-78680.
We need to always destroy current, not just when iter.data is not
set.
Take this opportunity to clean up the iterator destructor code a
bit, to remove redundant checks and incorrect comments.
Version numbers are not supposed to be localized, so we must not apply
locale dependent parsing with `atof()`.
Using `php_version_compare()` might even be better.
Closes GH-6668.
We need to handle the case where a CRLF after a Bcc header is not the
beginning of a folding marker, because in that case the Bcc header was
not the last "thing".
Closes GH-6666.
We must not use the locale dependent `atof()`, but instead use the
(hopefully) locale independent `zend_strtod()`, when converting string
representations of floating point numbers which are sent by the server.
Closes GH-6665.
When Phars are flushed, a new temporary file is created for each entry
which should be compressed, and the `compressed_filesize` is retrieved.
Afterwards, the Phar manifest is written, and only after that the files
are copied to the actual Phar. So for each such entry there is an open
temp file, what easily exceeds the limit.
Therefore, we use a single temporary file for all entries, and store
the start offset in the otherwise unused `header_offset` member. We
ensure that the `cfp` members are properly set to NULL even if flushing
fails, to avoid use after free scenarios.
This solution is based on a suggestion by @lserni[1].
Closes GH-6643.
[1] <https://github.com/box-project/box2/issues/80#issuecomment-77147371>
Move the load_wsdl_ex call into the zend_try that destroys the
docs hash table. The wsdl will be inserted into docs early on,
and will thus be released on subsequent bailout.
We remove the arbitrary restriction to `INT_MAX`; it is superfluous on
32bit systems where `ZEND_LONG_MAX == INT_MAX` anyway, and not useful
on 64bit systems, where larger files should be readable, if the
`memory_limit` is large enough.
Closes GH-6648.
That bug report originally was about `parse_url()` misbehaving, but the
security aspect was actually only regarding `FILTER_VALIDATE_URL`.
Since the changes to `parse_url_ex()` apparently affect userland code
which is relying on the sloppy URL parsing[1], this alternative
restores the old parsing behavior, but ensures that the userinfo is
checked for correctness for `FILTER_VALIDATE_URL`.
[1] <https://github.com/php/php-src/commit/5174de7cd33c3d4fa591c9c93859ff9989b07e8c#commitcomment-45967652>
The default encoding of filenames in a ZIP archive is IBM Code Page
437. Phar, however, only supports UTF-8 filenames. Therefore we have
to mark filenames as being stored in UTF-8 by setting the general
purpose bit 11 (the language encoding flag).
The effect of not setting this bit for non ASCII filenames can be seen
in popular tools like 7-Zip and UnZip, but not when extracting the
archives via ext/phar (which is agnostic to the filename encoding), or
via ext/zip (which guesses the encoding). Thus we add a somewhat
brittle low-level test case.
Closes GH-6630.
Check open_basedir after the fallback to the system's temporary
directory in tempnam().
In order to preserve the current behavior of upload_tmp_dir
(do not check explicitly specified dir, but check fallback),
new flags are added to check open_basedir for explicit dir
and for fallback.
Closes GH-6526.
When extracting compressed files from an uncompressed Phar, we must not
use the direct file pointer, but rather get an uncompressed file
pointer.
We also add a test to show that deflated and stored entries are
properly extracted.
This also fixes#79912, which appears to be a duplicate of #69279.
Co-authored-by: Anna Filina <afilina@gmail.com>
Closes GH-6599.
This is mainly to work around https://github.com/curl/curl/issues/6455,
but not building the mime structure for empty hashtables is a general
performance optimization, so we do not restrict it to affected cURL
versions (7.56.0 to 7.75.0).
The minor change to bug79033.phpt is unexpected, but should not matter
in practice.
Closes GH-6606.
The internal function `_readline_command_generator()` modifies the
internal array pointer of `readline_completion_function()`'s return
value. We therefore separate the array, what also avoids failing
assertions regarding the array refcount.
Closes GH-6582.
We must not assume that the first end of central dir signature in a ZIP
archive actually designates the end of central directory record, since
the data in the archive may contain arbitrary byte patterns. Thus, we
better search from the end of the data, what is also slightly more
efficient.
There is, however, no way to detect the end of central directory
signature by searching from the end of the ZIP archive with absolute
certainty, since the signature could be part of the trailing comment.
To mitigate, we check that the comment length fits to the found
position, but that might still not be the correct position in rare
cases.
Closes GH-6507.
I noticed this problem while dumping the contents of EG(function_table),
where keys for closures start with a null byte. printf interprets this
as a zero-length string and emits nothing. This allows the key to be
rendered properly in readable form.
Closes GH-6577.
To avoid that `parse_url()` returns an erroneous host, which would be
valid for `FILTER_VALIDATE_URL`, we make sure that only userinfo which
is valid according to RFC 3986 is treated as such.
For consistency with the existing url parsing code, we use ctype
functions, although that is not necessarily correct.
In the case of a stream with no filters, php_stream_fill_read_buffer
only reads stream->chunk_size into the read buffer. If the stream has
filters attached, it could unnecessarily buffer a large amount of data.
With this change, php_stream_fill_read_buffer only proceeds until either
the requested size or stream->chunk_size is available in the read buffer.
Co-authored-by: Christoph M. Becker <cmbecker69@gmx.de>
Closes GH-6444.
This fixes two related issues:
1. When a PS with cursor is used in store_result/get_result,
perform a COM_FETCH with maximum number of rows rather than
silently switching to an unbuffered result set (in the case of
store_result) or erroring (in the case of get_result).
In the future, we might want to make get_result unbuffered for
PS with cursors, as using cursors with buffered result sets
doesn't really make sense. Unlike store_result, get_result
isn't very explicit about what kind of result set is desired.
2. If the client did not request a cursor, but the server reports
that a cursor exists, ignore this and treat the PS as if it
has no cursor (i.e. to not use COM_FETCH). It appears to be a
server side bug that a cursor used inside an SP will be reported
to the client, even though the client cannot use the cursor.
Fixes bug #64638, bug #72862, bug #77935.
Closes GH-6518.
Don't truncate the file length to unsigned int...
I have no idea whether that fully fixes the problem because the
process gets OOM killed before finishing, but at least the
immediate parse error is gone now.
`phar_path_check()` already strips a leading slash, so we must not
attempt to strip the trailing slash from an now empty directory name.
Closes GH-6508.
Like Cygwin, this platform needs to use a real-time timer.
This was based on a patch by @kadler, but it didn't handle unsetting
the timer, so the timeout would continue to be active, triggering
`hard_timeout` unexpectedly. The patch is fixed to handle unsetting.
Closes GH-6503.
Like the test title and some comments in this test describe, this test
was supposed to have `::prepare()` failing because `LOAD DATA INFILE`
would not be supported as prepared statement, and then the test checks
whether follow-up queries would succeed. However, `LOAD DATA INFILE`
is supported for prepared statements at least on Windows with mysqlnd,
so the test does no longer test what it is supposed to do. Therefore,
we drop it.
Closes GH-6509.
When we receive an error while reading a result set, we should
assume that no more result sets are available. libmysqlclient
implements the same behavior.
When `php_zlib_deflate_filter()` is called with `PSFS_FLAG_FLUSH_INC`
but without new buckets being available (e.g. because a user calls
`rewind()` after writing to the stream), we have to make sure that any
pending data are flushed. This could basically be done like in the
attached patch[1], but that could cause unnessary flushes, which can be
harmful for compression, and adds unnecessary flush markers to the
stream. Thus, we use the `php_zlib_filter_data.finished` field, which
has not been used for `zlib.deflate` filters, and properly keep track
of the need to flush.
[1] <https://bugs.php.net/patch-display.php?bug_id=48725&patch=zlib-filter-flush-fix.patch&revision=latest>
Closes GH-6019.
Reading from a stream may return greater than zero, but nonetheless the
stream's EOF flag may have been set. We have to cater to this
condition by setting the close flag for filters.
We also have to cater to that change in the zlib.inflate filter:
If `inflate()` is called with flush mode `Z_FINISH`, but the output
buffer is not large enough to inflate all available data, it fails with
`Z_BUF_ERROR`. However, `Z_BUF_ERROR` is not fatal; in fact, the zlib
manual states: "If deflate returns with Z_OK or Z_BUF_ERROR, this
function must be called again with Z_FINISH and more output space
(updated avail_out) but no more input data, until it returns with
Z_STREAM_END or an error." Hence, we do so.
Closes GH-6001.
If there is no result set (e.g. for upsert queries), still allow
fetching to occur without error, i.e. treat it the same way as
an empty result set.
This normalizes behavior between native and emulated prepared
statements and addresses a regression in PHP 7.4.13.
Apparently, there are broken tarballs out there which are actually in
ustar format, but did not write the `ustar` marker. Since popular tar
tools like GNU tar and 7zip have no issues dealing with such tarballs,
Phar should also be more resilient.
Thus, when the first checksum check of a tarball in (presumed) in old-
style format fails, we check whether the checksum would be suitable for
ustar format; if so, we treat the tarball as being in ustar format.
Closes GH-6479.
In MariaDB-10.4.3 EXPIRE passwords where supported for
MariaDB. This only behaves like MySQL when the system
variable disconnect_on_expired_passwords=1.
MariaDB if there was no password it could not be considered
expired. So the test is adjusted to use actual passwords.
(MariaDB commit a94b20a8e0d9e64eeaabdaaa7a3e03fcdb8a686e)
The error codes produced my MariaDB are different
however still conforming to the SQL specification.
Closes GH-6480.
MariaDB extended the default decimal field to 39 characters
instead of MySQL's 31 characters.
This small change allows the test to pass on MySQL and MariaDB.
Closes GH-6484.
Phar signatures practically are of limited size; for the MD5 and SHA
hashes the size is fixed (at most 64 bytes for SHA512); for OpenSSL
public keys there is no size limit in theory, but "64 KiB ought to be
good enough for anybody". So we check for that limit, to avoid fatal
errors due to out of memory conditions.
Since it is neither possible to have the signature compressed in the
ZIP archive, nor is it possible to manually add a signature via Phar,
we use ZipArchive to create a suitable archive for the test on the fly.
Closes GH-6474.
Apparently treating LibreSSL as OpenSSL 1.1 is not just something
we did in our code, it's something that upstream LibreSSL claims,
despite not actually being compatible. Duh.
Check for EVP_CIPH_OCB_MODE instead, which should reliably
determine support...
We avoid `YYCURSOR` becoming `NULL` by initializing `YYMARKER`, and add
a default rule for `<NORMAL>` where we catch unexpected input.
We also fix the only superficially related issue regarding empty input
followed by `T_SEPARATOR` and command, which caused another segfault.
Closes GH-6464.
Our CPU detection code currently only checks whether hardware
support for AVX exists. However, we also need to check for operating
system support for XSAVE, as well as whether XCR0 has the SSE and
AVX bits set.
If this is not the case, unset the AVX and AVX2 bits in the cpuinfo
structure.
Hopefully this resolves our issues with CPU support detection.
Closes GH-6460.
MySQL removed RENAME DATABASE in 18300001c1dbbfddf9a0adcbaeea68956102bdd0
(Sept 2007, 5.1.23). As this briefest existance is very insignificant lets remove it.
It also breaks when testing against MariaDB.
As the alternate path in this test covers all supported MySQL and MariaDB
versions and a signifant portion of unsupported versions lets keep it simple.
Closes GH-6459.
Rename the methods in MessageFormatAdapter to make sure they don't
clash with anything defined by icu itself, which may be a problem
if icu is linked statically.
The current behavior has been introduced 20 years ago in
f9e375f493 as part of a larger change.
It's not clear to me why special treatement of -lpthread is necessary
here.
References to null-serializations are stored as null, and as such
are part of the reference count.
Reminds me that we really need to deprecate the mess that is
Serializable.
Reindent ext/mysqli tests on PHP-7.4, so they match with the
indentation on PHP-8.0. Otherwise merging test changes across
branches is very unpleasant.
In the somewhat unlikely case that `zend_fstat()` fails, we must not
proceed executing the function, but return `false` instead.
Patch based on the patch contributed by sagpant at microsoft dot com.
Closes GH-6432.
`\r\n` does only terminate a header, if not followed by `\t` or ` `.
We have to cater to that when determining the end position of the
respective headers.
Closes GH-6420.
We must not redefine the version "constants" for phpize builds, because
these have already generated in phpize.js, from where we pass these
variables forward to configure.js.
We also add `PHP_EXTRA_VERSION` and `PHP_VERSION_STRING` to the files
for completeness.
Closes GH-6419.
For x ? y : z style structures, the live range starts at z, but
may also hold the value of y. Make sure that the refcounting check
takes this into account, by checking the type of a potential phi
user.
Failure to rebind such closures is not necessarily related to them
being created by `ReflectionFunctionAbstract::getClosure()`, so we fix
the error message.
Closes GH-6424.
If there is a previous use of the new variable in the phi, we need
to NULL out the use chain of the new source we're adding.
Test case is reduced from an assertion failure in the Symfony Demo.
This cherry-picks 33969c2252 and
2effbfd871 from PHP-8.0.
The issues these commits fix could also manifest in PHP 7.4, and
a commenter on bug #80307 reports this this might indeed be
happening.
As of commit 81b2f3e[1], `parse_url()` accepts URLs with a zero port,
but does not report that port, what is wrong in hindsight.
Since the port number is stored as `unsigned short` there is no way to
distinguish between port zero and no port. For BC reasons, we thus
introduce `parse_url_ex2()` which accepts an output parameter that
allows that distinction, and use the new function to fix the behavior.
The introduction of `parse_url_ex2()` has been suggested by Nikita.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=81b2f3e5d9fcdffd87a4fcd12bd8c708a97091e1>
Closes GH-6399.
We should use normal function renaming if the function is declared
during preloading itself, rather than afterwards.
This fixes a regression introduced by
68f80be9d1.
JIT ignores that the `zend_write` callback is overwritten, so we define
our own callback and caller.
We also fix the "inconsistent DLL binding" warnings on Windows, by
introducing `PHP_ZEND_TEST_API`.
Closes GH-6391.
We cannot simply switch to use_result here, because the fetch_row
methods in get_result mode and in use_result/store_result mode
are different: In one case it accepts a statement, in the other
a return value zval. Thus, doing a switch to use_result results
in a segfault when trying to fetch a row.
Actually supporting get_result with cursors would require adding
cursor support in mysqlnd_result, not just mysqlnd_ps. That would
be a significant amount of effort and, given the age of the issue,
does not appear to be particularly likely to happen soon.
As such, we simply generate an error when using get_result()
with cursors, which is much better than causing a segfault.
Instead, parameter binding needs to be used.
The EOF flag also gets set on error, so we always end up ignoring
errors here.
However, we should only check errors for unbuffered results. For
buffered results, this function is guaranteed not to error, and
querying the errno may return an unrelated error.
Unless `SQLGetData()` returns `SQL_SUCCESS` or `SQL_SUCCESS_WITH_INFO`,
the `StrLen_or_IndPtr` output argument is not guaranteed to be properly
set. Thus we handle retrieval failure other than `SQL_ERROR` by
yielding `false` for those column values and raising a warning.
Closes GH-6281.
Set error_info when we fail to read a packet, instead of throwing
a warning. Additionally we also need to populate the right
error_info in rowp_read -- we'll later take the error from the
packet, not the connection.
No test case, as this is hard to reliably test. I'm using the
test case from:
https://github.com/php/php-src/pull/2131#issuecomment-538374838
We have to error on unhandled exceptions in FFI callbacks, to avoid
passing back undefined values.
This has been discussed and agreed upon in a previous PR[1].
[1] <https://github.com/php/php-src/pull/5120>
Closes GH-6366.
Report errors autocommit, commit, rollback and mysqli_stmt_attr_set.
Additionally, copy the error from conn to stmt when preparing fails,
so these errors are also handled by mysqli_stmt_prepare.
Closes GH-6157.
Make sure deadlock errors are properly propagated and reports in
a number of places in mysqli and PDO MySQL.
This also fixes a memory and a segfault that can occur under these
conditions.
This reverts commit bf6873a18e.
CVE-2020-26159 is bogus; the "bug" was apparently a false positive
reported by Coverity, and the "fix" apparently wrong, see
<https://github.com/kkos/oniguruma/issues/221>.
Closes GH-6357.
libxml2 has no particular issues parsing HTML strings with NUL bytes;
these just cause truncation of the current text content, but parsing
continues generally. Since `::loadHTMLFile()` already supports NUL
bytes, `::loadHTML()` should as well.
Note that this is different from XML, which does not allow any NUL
bytes.
Closes GH-6368.
A recent bug fix regarding symlinks claimed:
> After resolving reparse points, the path still may be a reparse
> point; in that case we have to resolve that reparse point as well.
While that is basically correct, some reparse points may point to
inaccessible system folders (e.g. `IO_REPARSE_TAG_DEDUP` points to
"\System Volume Information"). Since we don't know details about
arbitrary reparse points, and are mainly interested in nested symlinks,
we take a step back, and only resolve `IO_REPARSE_TAG_SYMLINK` for now.
Close GH-6354.
`ADD_EXTENSION_DEP()` relies on the `PHP_<extname>` config variables to
be set to `"yes"`, and since the standard and date extension are always
enabled, we define the respective variables uncoditionally.
Closes GH-6383.
"Uninitialized" here means that the object was created ordinarily
-- no constructor skipping involved. Most tidy methods seem to
handle this fine, but these three need to be guarded.
libc-client expects `TYPEMESSAGE` with an explicit subtype of `RFC822`
to have a `nested.msg` (otherwise there will be a segfault during
free), but not to have any `contents.text.data` (this will leak
otherwise).
Closes GH-6345.
In libc-client 2007f `data` is declared as `unsigned char *`; there may
be variants which declare it as `void *`, but in any case picky
compilers may warn about a pointer type mismatch in the conditional
(and error with `-W-error`), so we're adding a `char *` cast for good
measure.
The original fix for that bug[1] broke the formerly working composition
of message/rfc822 messages, which results in a segfault when freeing
the message body now. While `imap_mail_compose()` does not really
support composition of meaningful message/rfc822 messages (although
libc-client appears to support that), some code may still use this to
compose partial messages, and using string manipulation to create the
final message.
The point is that libc-client expects `TYPEMESSAGE` with an explicit
subtype of `RFC822` to have a `nested.msg` (otherwise there will be a
segfault during free), but not to have any `contents.text.data` (this
will leak otherwise).
[1] <http://git.php.net/?p=php-src.git;a=commit;h=0d022ddf03c5fabaaa22e486d1e4a367ed9170a7>
Closes GH-6343.
While OpenSSL 1.1 allows unconditionally setting the CCM tag length
even for decryption, some older versions apparently do not. As such,
we do need to treat CCM and OCB separately after all.
OCB mode ciphers were already exposed to openssl_encrypt/decrypt,
but misbehaved, because they were not treated as AEAD ciphers.
From that perspective, OCB should be treated the same way as GCM.
In OpenSSL 1.1 the necessary controls were unified under
EVP_CTRL_AEAD_* (and OCB is only supported since OpenSSL 1.1).
Closes GH-6337.
openssl_encrypt() currently throws a warning if the $tag out
parameter is passed for a non-authenticated cipher. This violates
the principle that a function should behave the same if a parameter
is not passed, and if the default value is passed for the parameter.
I believe this warning should simply be dropped and the $tag be
populated with null, as is already the case. Otherwise, it is not
possible to use openssl_encrypt() in generic wrapper APIs, that are
compatible with both authenticated and non-authenticated encryption.
Closes GH-6333.
If unsupported `$search_criteria` are passed to `imap_sort()`, the
function returns an empty array, but there is also an error on the
libc-client error stack ("Unknown search criterion: UNSUPPORTED
(errflg=2)"). If, on the other hand, unsupported `$criteria` or
unsupported `$flags` are passed, the function returns `false`. We
solve this inconsistency by returning `false` for unsupported
`$search_criteria` as well.
Closes GH-6332.
At least on Windows, some static variables are lazily initialized
during `mail_open()` and `mail_lsub()`, which are reported as memory
leaks. We suppress these false positives.
Closes GH-6326.
The message patterns can be pretty complex, so reporting a generic
U_PARSE_ERROR without any additional information makes it needlessly
hard to fix erroneous patterns.
This commit makes use of the additional UParseError* parameter to
umsg_open to retrieve more details about the parse error to report that
to the user via intl_get_error_message()
Additional improve error reporting from the IntlMessage constructor.
Previously, all possible failures when calling IntlMessage::__construct()
would be masked away with a generic "Constructor failed" message.
This would include invalid patterns.
This commit makes sure that the underlying error that caused the
constructor failure is reported as part of the IntlException error
message.
Closes GH-6325.
Unless `topbod` is of `TYPEMULTIPART`, `mail_free_body()` does not free
the `nested.part`; while we could do this ourselves, instead we just
ignore additional bodies in this case, i.e. we don't attach them in the
first place.
Closes GH-6321.
X509_PURPOSE_OCSP_HELPER, X509_PURPOSE_TIMESTAMP_SIGN are available
from OpenSSL for many years:
- X509_PURPOSE_OCSP_HELPER, since 2001
- X509_PURPOSE_TIMESTAMP_SIGN, since 2006
Also drop the ifdef check for X509_PURPOSE_ANY, as it is always
available in supported OpenSSL versions.
Closes GH-6312.
If the RHS has INDIRECT elements, we do not those to be added to
the LHS verbatim. As we're using UPDATE_INDIRECT, we might even
create a nested INDIRECT that way.
This is a side-quest of oss-fuzz #26245.
We separate the input arrays and all sub-arrays to avoid modification
of the passed parameters.
This should be rewritten to use `zend_string`s for the "master" branch.
Closes GH-6316.
The documentation of `tidyNode::isHtml()` states that this method
"checks if a node is part of a HTML document". That is, of course,
nonsense, since a tidyNode is "an HTML node in an HTML file, as
detected by tidy."
What this method is actually supposed to do is to check whether a node
is an element (unless it is the root element). This has been broken by
commit d8eeb8e[1], which assumed that `enum TidyNodeType` would
represent flags of a bitmask, what it does not.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=d8eeb8e28673236bca3f066ded75037a5bdf6378>
Closes GH-6290.
There is no such thing as the "end of the unix epoch", and if it was,
it would certainly not be 2037-10-11T02:00:00. There is, however,
potential integer overflow which we need to avoid.
Closes GH-6288.
It is mandatory to pass either `SQL_NO_NULLS` or `SQL_NULLABLE` as
tenth parameter to `SQLSpecialColumns()`; otherwise the function call
fails. Therefore the user must be allowed to pass the desired value
as parameter to `odbc_specialcolumns()` again.
Closes GH-6200.
We have to log errors in `stream_opener` callbacks to the wrapper's
error log, because otherwise we may pick up an unrelated `errno` or a
most generic message.
Closes GH-6187.
libcurl 7.62.0 introduced a maximum protocol length of 8, so this test
case failed with `CURLE_URL_MALFORMAT`. While this is lifted to 40 as
of libcurl 7.65.0, and this test case has already been fixed with
commit e27301c[1], we restore the original intention to check for a
`CURLE_UNSUPPORTED_PROTOCOL ` error.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=e27301c7b37f6a1643a0dc1966919bd62a32bc74>
If restoring of any not registered built-in wrapper is requested, the
function is supposed to fail with a warning, so we have to check this
condition first.
Furthermore, to be able to detect whether a built-in wrapper has been
changed, it is not sufficient to check whether *any* userland wrapper
has been registered, but rather whether the specific wrapper has been
modified.
Closes GH-6183.
Passing `NULL` as `lpFileSizeHigh` to `GetFileSize()` gives wrong
results for files larger than 0xFFFFFFFF bytes. We fix this by using
`GetFileSizeEx()`, and let the mapping fail, if the file size is too
large for the architecture.
Closes GH-5319.
Instead of attempting to map large files into memory at once, we map
chunks of at most `PHP_STREAM_MMAP_MAX` bytes, and repeat that until we
hit the point where `php_stream_seek()` fails (see bug 54902), and copy
the rest of the file by reading and writing small chunks.
We also fix the mapping behavior for zero bytes on Windows, which did
not error (as with `mmap()`), but would have mapped the remaining file.
URIs with a 0 port are generally valid, so `parse_url()` should
recognize such URIs, but still report the port as missing.
Co-authored-by: twosee <twose@qq.com>
Closes GH-6152.
MariaDB versioning created a mess with regarding testing
features based on version. We sidestep the problem here
by assuming the extensions are present, and if a syntax
error occurs with a SQL mode TRANS_START_READ_WRITE |
TRANS_START_READ_ONLY enabled, then output the same
warning as before.
Travis on 7.3 is showing this error:
> The size of BLOB/TEXT data inserted in one transaction is greater
> than 10% of redo log size. Increase the redo log size using
> innodb_log_file_size.
Force MyISAM engine to avoid this.
* PHP-7.3:
Fix bug #80107: Handling of large compressed packets
Bug #80107 Add test for mysqli_query() fails for ~16 MB long query when compression is enabled
There's two layers of packet splitting going on. First, packets
need to be split into having a payload of exactly 2^24-1 bytes or
being the last packet. If the split packet has size between 2^24-5
and 2^24-1 bytes, the compressed packets also needs to be split,
though the choice of split doesn't matter here. I'm splitting off
the first 8192 bytes, as that's what I observe libmysqlclient to be
doing.
Tested with:
* mysql-5.6.49-linux-glibc2.12-x86_64
* mysql-5.7.31-linux-glibc2.12-x86_64
* mysql-8.0.21-linux-glibc2.17-x86_64
* mariadb-10.5.6
configure --with-mysqli=/usr/local/$version/bin/mysql_config --with-pdo-mysql=/usr/local/$version
MySQL-8.0 removed my_bool
Some options where deprecated in mysql-8.0
MY_CHARSET_INFO used with exposed api mysql_get_character_set_info
rather than internal structures.
Add db2_execute() to the list of functions accessing the local
scope. Ideally the API wouldn't do that, but it seems most
pragmatic to address this on the opcache side at this point.
The "member" string here does not necessarily have a pre-calculated
hash value. In particular this is not the case if the class has no
properties.
Fixes oss-fuzz #25546.
A recent commit[1] which fixed a memory leak introduced a regression
regarding the formerly liberal handling of IP addresses to bind to. We
fix this by reverting that commit, and fix the memory leak where it
actually occurs. In other words, this fix is less intrusive than the
former fix.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=0b8c83f5936581942715d14883cdebddc18bad30>
Closes GH-6104.
Modules may have changed after restart which can cause dangling pointers from custom opcode handlers in the second-level cache files. This fix includes the installed module names and versions in the accel_system_id hash as entropy. Closes GH-5836
Quoting from the bug report:
> The domain names passed to getmxrr() do not contain a trailing dot.
> DNS lookups which do not find records will (depending on the local
> resolver config) try again by adding the local domain to the end of
> the searched host/domain. In many environments there's an mx record
> for any subdomain of the local domain and the MX query will return
> a hit. But the test expects no hit. So the test fails when checking
> that "qa.php.net" does not have an MX record in DNS. In our local
> environment the resolver falls back to also check qa.php.net.kippdata.de
> which does have an MX record. Using "qa.php.net." instead of "qa.php.net"
> should fix this for everyone.
Do not decrement the refcount before allocating the new string,
as the allocation operation may bail out and cause a use-after-free
lateron. We can only decrement the refcount once the allocation
has succeeded.
Fixes oss-fuzz #25384.
php_parse_url() is intended to support strings that are not zero
terminated. We can't use strcspn in the implementation.
As we have two uses of strcspn, add a helper.
Use the general zend_generator_throw_exception() helper for this.
Otherwise we don't handle the off-by-one opline correctly (should
we maybe just stop doing that?)
This is a followup to ad750c3bb6,
which fixed a different yield from exception handling problem that
happened to show up in the same test case from oss-fuzz #25321.
Now both issues should be fixed.
There is a deeper underlying issue here, in that the opcodes violate
VM write-fetch safety, but let's fix the infinite loop first.
This fixes oss-fuzz #25352.
This can happen if zend_call_function inserted a dummy frame,
and we already switched to the dummy frame in leave_helper,
and an exception is thrown during CV destruction.
Fixes oss-fuzz #25343.
We can't just remove the uses, we need to replace uses.
The test case only fails on master with SSA integrity violations,
but I believe the root issue also existed previously.
If we're accessing an uninitialized typed property and __get is
defined, don't perform a read_property callback, as __get is
supposed to have no effect on uninitialized typed properties.
Usually it doesn't, but by-reference assignments cannot be
performed through read_property.
I'm deleting the test for bug #80039 again, as it doesn't really
make sense anymore with this fix.
Added new flags that allow skipping param_evt(s) that are not used by drivers,
in a backwards and forward compatible manner. Updated the pgsql, mysql, sqlite
and oci drivers to properly use the new flags. I've left out pdo_dblib, which
doesn't have a param_hook, and pdo_firebird, which seems to be using
PARAM_EVT_NORMALIZE in a wrong context (param type vs event type).
Currently we only ever increment ifd_nesting_level, so this ends up
being a limit on the total number of IFD tags and we regularly get
bug reports of it being exceeded. I think the intention behind this
limit was to prevent recursion stack overflow, and for that we only
need to check actual recursive usage. I've implemented that here,
and dropped the nesting limit down to a smaller value
(which still passes our tests).
However, it seems that we do also need to have a total limit on
the number of tags, as we don't catch some instances of infinite
looping otherwise. Add this as a separate limit with a higher
value, that should hopefully be sufficient.
This is expected to fix a number of bugs:
https://bugs.php.net/bug.php?id=78083https://bugs.php.net/bug.php?id=78701https://bugs.php.net/bug.php?id=79907https://bugs.php.net/bug.php?id=80016
If the length is not -1, require it to be non-negative.
Using such lengths doesn't make sense (as only -1 is special-case
to read in chunks, anything else will end up doing a huge upfront
allocation) and can lead to string allocation overflow.
A similar check is already in place for file_get_contents(). That
one does not allow -1 (and uses null instead), but this function
is explicitly specified to accept -1, so stick to that behavior.
As of PHP 7.4.0, exceptions are allowed to be thrown from inside
`__toString()` methods; we have to cater to that, and catch these
exceptions early.
Closes GH-6042
`ITypeInfo_GetIDsOfNames()` is supposed to fail with `E_NOTIMPL` for
out-of-process servers, thus we should not remove the already available
typeinfo of the object in this case.
We also properly free the `byref_vals`.
`tolower()` returns an `int`, so we must not convert to `char` which
may be `signed` and as such may be subject to overflow (actually,
implementation defined behavior).
Closes GH-6007
PDO driver constructors are throwing PdoException without setting
errorInfo, so create a new reusable function that throws exceptions
for PDO and will also set the errorInfo. Use this function in
pdo_mysql, pdo_sqlite, and pdo_pgsql.
Different manufacturer models may come with a
different endianness (motorola/intel) format. In
order to avoid a big refactor and a gigantic lookup
table, this commit simply attempts to switch the
endianness and proceed when values are acceptable.
Closes GH-5849.
op_arrays can be shared on two levels: Either the op_array is
completely shared, or it is distinct but shares all members
(apart from static_variables).
The the op_array is distinct, we need to make sure to properly
initialize the MAP_PTR structures.
Whether the type library is cached is actually irrelevant here; what
matters is that the symbols are imported, and since these are not
cached, we have to import them for every request. And we cannot cache
the symbols, because the import depends on the current codepage, but
the codepage is a `PHP_INI_ALL` setting.
We must not call `zend_list_delete()` in resource closer functions
exposed to userland, because decreasing the refcount there leads to
use-after-free scenarios. In this case, commit 4a42fbb worked for
typical use-cases where `xml_parser_free()` has been called exactly
once for the resource, because there is an internal zval (`->index`)
referencing the same resource which already increased the refcount by
one. However, when `xml_parser_free()` is called multiple times on the
same XML parser resource, the resource would be freed prematurely.
Instead we forcefully close the resource in `xml_parser_free()`. We
also could decrease the refcount of the resource there, but that would
require to call `xml_parser_free()` which is somewhat uncommon, and
would be particularly bad wrt. PHP 8 where that function is a NOP, and
as such doesn't have to be called. So we do no longer increase the
refcount of the resource when copying it to the internal zval, and let
the usualy refcounting semantics take care of the resource destruction.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=4a42fbbbc73aad7427aef5c89974d1833636e082>
Move the FREE_OP for op_data out of the zend_binary_assign_op_dim_slow()
slow path, so it can be used by the other error path as well. This
makes ASSIGN_DIM_OP structurally more similar to ASSIGN_DIM.
These systems has two versions of the iovec interface dependent on
compiler flags passed, the legacy version causing little build issue.
Closes GH-5939.
Okay, looks like ai_canonname does not get set on macos even if
AI_CANONNAME is specified, so canonicalize this in the other
direction instead and unset ai_canonname if it is present.
This test is doing something really dubious. There's a race
condition here that would kill some poor process that happens
to start at just the wrong time.
Instead of storing the mapping base address and the address of
`execute_ex()` in a separate file in the temporary folder, we store
them right at the beginning of the memory mapping.
This reverts commit e1f6ab3388, reversing
changes made to e0ebe56ebf.
There are obviously issues with running tests in parallel, maybe
related to the cache ID. This needs to be investigated. Revert for
now.
If the CTRL-C event can't be sent to the child for whatever reason, the
test will never terminate, because `proc_close()` waits for an infinite
amount of time. Therefore, we `proc_terminate()` the child instead,
after explicitly closing the pipes.
Instead of storing the mapping base address and the address of
`execute_ex()` in a separate file in the temporary folder, we store
them right at the beginning of the memory mapping.
The file extension to mime type mapping *must* not depend on the file
extension's case for case-insensitive file systems, and *should* not
for case-sensitive file systems.
It does not make sense to make assumptions about `PHP_CONFIG_FILE_PATH`
during build time, since that value is never used during run time on
Windows. Since there is no `--with-config-file-path` on Windows
either, we define `PHP_CONFIG_FILE_PATH` as `""`.
This test fails occasionally due to timing issues, because the session
file may have been unlinked by the first `session_start()`'s GC. We
adapt the test expectation to this reality.
This only leaks at the end of the process, so per se not an issue, but
the leak is caught by MSVC's CRT leak checker, so we better properly
clean up to avoid false positives.
We must not mix multibyte and wide character strings in the
`COAUTHIDENTITY` structure. Using wide character strings throughout
would have the advantage that the remote connection can be established
regardless of the code page of the server, but that would more likely
break BC, so we just drop the wide character string conversion of the
username.
Similar to what is done for ReflectionType itself, copy the
type name stored inside ReflectionProperty. Also make sure the
type field is always initialized for dynamic properties.
This is a non-issue in PHP 8, because we store a pointer to the
property_info there, rather than a copy.
We mark symlink_link_linkinfo_is_link_error2.phpt as XFAIL on Windows
ZTS. Several Windows API file system functions ignore trailing spaces
in absolute filenames after the final directory separator, which causes
`link(' ', $link)` to actually call `CreateHardLink()` which then
fails, because linking folders is not supported. However, with NTS
builds (as well as on other systems), the $target is found to not
exist, so the function fails without actually attempting to create the
link. This needs further investigation.
When performing an RW modification of an array offset, the undefined
offset warning may call an error handler / OB callback, which may
destroy the array we're supposed to change. Detect this by temporarily
incrementing the reference count. If we find that the array has been
modified/destroyed in the meantime, we do nothing -- the execution
model here would be that the modification has happened on the destroyed
version of the array.
In the interest of avoiding side-effects during dumping, I'm
replacing the value with a <constant ast> string instead of
performing an update constant operation.
We modify _basic1.phpt so it runs on Windows as well. The other test
cases hit the issue that `readlink()` fails normally for regular files,
but succeeds on Windows[1]. Therefore, we split these tests, but still
fix the skip reasons.
[1] <http://svn.php.net/viewvc?view=revision&revision=350097>
Most of these have been skipped on Windows for no good reason (`lstat`
is available there as of PHP 4). Several others would only fail,
because the `blksize` and `blocks` elements are always `-1` on Windows,
which can easily be fixed by using `%i` format specifiers instead of
`%d`.
Fixes a use-after-free encountered in Symfony's SecurityBundle.
I don't have a reproducer for this, and believe the issue can only
occur if we leak an iterator (the leak is a separate issue).
We should not free the generator iterator here, because we do not
own it. The code that fetched the iterator is responsible for
releasing it. In the rare case where we do hit this code-path,
we cause a use-after-free.
A `BSTR` is similar to a `zend_string`; it stores the length of the
string just before the actual string, and thus the string may contain
NUL bytes. However, `php_com_olestring_to_string()` is supposed to
deal with arbitrary `OLECHAR*`s which may not be `BSTR`s, so we
introduce `php_com_bstr_to_string()` and use it for the only case where
we actually have to deal with `BSTR`s which may contain NUL bytes.
Contrary to `php_com_olestring_to_string()` we return a `zend_string`,
so we can save the re-allocation when converting to a `zval`.
We also cater to `php_com_string_to_olestring()` not being binary safe,
with basically the same fix we did for `php_com_olestring_to_string()`.
`ReflectionClass` allows reading of the values of private and protected
constants, and also to get private and protected static methods.
Therefore getting the values of private and protected static properties
is also permissible, especially since `::getStaticProperties()` already
allows to do so.
We also allow ::setStaticPropertyValue() to modify private and
protected properties, because otherwise this method is useless, as
modifying public properties can be done directly.
`atol()` returns a `long` which is not the same as `zend_long` on
LLP64; we use `ZEND_ATOL()` instead.
There is no need for a new test case, since filesize_large.phpt already
tests for that behavior; unfortunately, the FTP test suite relies on
`pcntl_fork()` and therefore cannot be run on Windows.
Check if data would overlap and also add an assert. Previous
implementations didn't have this issue, as the direct assignment was
used.
Signed-off-by: Anatol Belski <ab@php.net>
These were XFAILed due to a bug in the log implementation that
caused intermittent failures. However, this issue is supposed to
be resolved in the meantime, so try dropping the XFAIL marker.
The `security_level` stream option is only available as of OpenSSL
1.1.0, so we only set it for these versions. Older OpenSSL versions
do not have security levels at all.
This migrates all the tests using ext/openssl/tests/streams_crypto_method.pem
to the certificate generator, so we can easily adjust needed parameters.
In particular, this makes the cert security level 2 compatible.
However, we still need to downgrade security_level to 1 in a number
of tests, because they are testing TLS < 1.2 connections.
Saw a spurious failure from this one on azure macos, presumably
the process got interrupted in the middle and waited for more than
one second to resume.
After looking a bit more closely, this test doesn't actually test
what bug #48187 reported, because there is no DateTime::diff()
anywhere to be found. This test was also added speculatively,
because the root cause was never diagnosed, and the problems seems
to have resolved itself at some point.
As such, I'm simply dropping this test, rather than figuring out
how to make it more robust.
This makes the generated certificates compatible with security
level 2, which is apparently the default on Ubuntu 20.04.
Unfortunately this does not fix all tests, because some are using
pre-generated certificates.
Even if the length of a maker note does not match our expectations
(either because the maker note is corrupted, or because our
expectations do not quite match reality), there is no need to let
parsing fail; we can still go on parsing the other meta information.
Exception should be thrown before the db handle is destroyed.
The backtrace excerpt
==26628== Invalid read of size 4
==26628== at 0x53C49E3: sqlite3_errmsg (in /usr/lib64/libsqlite3.so.0.8.6)
==26628== by 0x38C4E9: zim_sqlite3_open (sqlite3.c:142)
==26628== by 0x8977BF: ZEND_DO_FCALL_SPEC_RETVAL_UNUSED_HANDLER (zend_vm_execute.h:1618)
==26628== by 0x8F801E: execute_ex (zend_vm_execute.h:53824)
==26628== by 0x8FC0BB: zend_execute (zend_vm_execute.h:57920)
==26628== by 0x828F54: zend_execute_scripts (zend.c:1672)
==26628== by 0x793C2C: php_execute_script (main.c:2621)
==26628== by 0x8FEA44: do_cli (php_cli.c:964)
==26628== by 0x8FF9DC: main (php_cli.c:1359)
Signed-off-by: Anatol Belski <ab@php.net>
The output normalization of bless_tests.php only detected absolute Unix
filenames; we extend this for absolute Windows filenames, regardless of
the platform we're running on (tests may have been run on Windows, but
bless_tests.php may be run from WSL or a Linux VM, for instance).
In module startup stage, we should not initiliaze
EG(modified_ini_directives) as it use zend MM, the zend MM will be
restart at the end of modules startup stage,
by say "partial", because this issue still exists if altering ZEND_USER
inis, we should add a zend_ini_deactive at the end of modules startup
stage, but it brings some new cost, and I think no one would do things
like that
The `timercmp()` manpage[1] points out that some systems have a broken
implementation which does not support `>=`. This is definitely the
case for the Windows SDK, which only supports `<` and `>`.
[1] <https://linux.die.net/man/3/timercmp>
If the current character is a line break character, it cannot be a tab
or space character, so we would always fail with an invalid sequence
error. Obviously, these `scan_stat == 4` conditions are meant to be
exclusive.
Furthermore, if `in_pp == NULL || in_left_p == NULL` is true, we hit a
segfault if we are not returning right away. Obviously, the additional
constraints don't make sense, so we remove them.
Extend configure.ac to accept PHP_UNAME as env variable to set the value of the
PHP_UNAME define in a reproducible manner. This allows distributions to set a
fixed value for php_uname and keep the default behaviour if PHP_UNAME is not
set.
Motivation: https://reproducible-builds.org/
Closes GH-5671.
Currently ./configure --enable-phar --program-suffix=7.4 will
result in binaries named php7.4 and phar but should instead
result in php7.4 and phar7.4
Closes GH-5650.
As its name suggests, `sqlite3_data_count` returns the number of
columns in the current row of the result set; we are interested in the
number of columns regardless of the current row, so we have to use
`sqlite3_column_count` instead.
As of PHP 7.3.0, `sapi_cli_single_write()` is supposed to return `< 0`
on failure, but `fwrite()` returns a `size_t`, and signals error by
setting the stream's error indicator. We have to cater to that.
* Properly initialize PHPDBG_G(watch_tmp)
Otherwise that may cause segfaults in ZTS builds.
* Deactivate potentially remaining watchpoints after REPL
Otherwise the memory could still be protected, resulting in segfaults
during shutdown.
* NULL zend_handlers_table after freeing
As of commit 4130fe4[1], the `zend_handlers_table` is explicitly
freed in the `zend_vm_dtor()`. Since phpdbg (and maybe some other
SAPIs) may restart the engine afterwards, we have to make sure that
the table is also NULLed.
* Only set context option if there is a context
In other words, we must not follow the null pointer.
* Cater to file handles without attached console
File handles do not necessarily have an attached console (for
instance, pipes do not), in which case `GetConsoleScreenBufferInfo()`
fails. In this case we set a default value (`40`) for lines like on
other systems.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=4130fe437a5db7ead1444d3748bd0fbad9829cb2>
On startup, PHP deliberately changes the floating point control word to
enforce binary64 format for the calculations for best consistency
across platforms. However, this is unnessary for x86_64 architectures,
because in this case SSE instructions are used by default, and there is
no good reason to pass `-mfpmath=i387` or such.
Therefore, we can skip the modification, which has the benefit that
system libraries are free to work in the mode of their liking.
I decided to null out EG(exception) early here, which means only
the exception from the dtor / ref assign is preserved, and the
previous exception is not chained in. This is more robust, and
I don't think this situation is common enough to be bothered about
the precise behavior.
There was some confusion going on here regarding the original
value vs the copied value.
I've dropped the needs_copy variable, because this code is not
inlined, so it would always be true anyway.
What we need to do is perform a move-assignment of the copied
value (in which case we don't care about performing the assignment
before destroying garbage), and destroying the original value
for the VAR/TMP cases. This is a bit complicated by the fact that
references are passed in via a separate ref variable, so we can't
just ptr_dtor the original variable.
On startup, PHP deliberately changes the floating point control word to
enforce binary64 format for the calculations for best consistency
across platforms. However, this is unnessary when compiling under
`__SSE__`, because in this case the x87 instructions are not used.
Therefore, we can skip the modification, which has the benefit that
system libraries are free to work in the mode of their liking.
The color resolution is expected in bits 4-6 of the packed fields byte
of the logical screen descriptor (byte 10 of the GIF data stream),
according to the specification[1], section 18.
[1] <https://www.w3.org/Graphics/GIF/spec-gif89a.txt>
If the class is already linked, we need to serialize and
unserialize INDIRECTed static properties. Normally these would
be set up when copying from cache.
Since the member is not used in `OnUpdateEol()` that's not really an
issue, but still it's confusing to apparently have two INI settings
targeting the same member.
* 'PHP-7.4' of git.php.net:/php-src:
Fix#79557: extension_dir = ./ext now use current directory for base
Fix#79596: MySQL FLOAT truncates to int some locales
[ci skip] Fix NEWS
For some reason, `ImageLoad()` fails to load images with a relative
path starting with `.\` or `./`. We work around this issue by
stripping those leading characters.
We add the missing release dates, the NEWS regarding the latest CVE
fixes, and move the entry for bug #79536 to 7.4.7 because it didn't
make it into 7.4.6.
lcov is emitting several errors for generated regex files that have no code
coverage data. The fix is to add the files to the lcov exlusion list.
This is not an issue for CI because it uses gcovr to generate code coverage.
The errors:
Processing ext/date/lib/parse_date.gcda
geninfo: WARNING: could not open /home/code/vendor/php/php-src/parse_date.re
geninfo: WARNING: could not open /home/code/vendor/php/php-src/<stdout>
geninfo: WARNING: some exclusion markers may be ignored
Processing ext/date/lib/parse_tz.gcda
Processing ext/date/lib/tm2unixtime.gcda
Processing ext/date/lib/parse_iso_intervals.gcda
geninfo: WARNING: could not open /home/code/vendor/php/php-src/<stdout>
geninfo: WARNING: could not open /home/code/vendor/php/php-src/parse_iso_intervals.re
geninfo: WARNING: some exclusion markers may be ignored
...
genhtml: ERROR: cannot read /home/code/vendor/php/php-src/parse_date.re
Processing file /home/code/vendor/php/php-src/parse_date.re
make: *** [Makefile:443: lcov-html] Error 2
Closes GH-5568.
To solve bug #70886, the test uses random keys to prevent collisions;
however, this is not guaranteed, and as such it may even collide with
other tests in the shmop test suite. The proper solution would be to
use a single key (which could be randomly generated), but to actually
`shmop_close()` after each `shmop_delete()`. This would, however, not
work on Windows due to bug #65987. Therefore we use three different
keys for now.
* PHP-7.3:
Fix#78876: Long variables cause OOM and temp files are not cleaned
Fix#78875: Long filenames cause OOM and temp files are not cleaned
Update NEWS for 7.2.31
Update CREDITS for PHP 7.2.30
Update NEWS for PHP 7.2.30
* PHP-7.2:
Fix#78876: Long variables cause OOM and temp files are not cleaned
Fix#78875: Long filenames cause OOM and temp files are not cleaned
Update NEWS for 7.2.31
Update CREDITS for PHP 7.2.30
Update NEWS for PHP 7.2.30
We must not cast `size_t` to `int` (unless the `size_t` value is
guaranteed to be less than or equal to `INT_MAX`). In this case we can
declare `array_len` as `size_t` in the first place.
We must not attempt to access arbitrary union members when retrieving
debug info, because that may not be valid. Therefore we do no longer
dereference pointer types inside of unions, but report their address as
string in `%p` format instead.
This is a funny one. I discovered that lstat_stat_variation10.phpt was failing every
now and again when the PHP test suite was run on my dev PC. The output from the failing
test showed that the atime (access time) of the directory created in the test was changing
between these lines:
$old_stat = stat($dirname);
clearstatcache();
sleep(1);
var_dump( is_dir($dirname) );
$new_stat = stat($dirname);
Could is_dir() be accessing the directory and changing the atime? strace showed that is_dir
was only issuing a single stat() syscall. Could stat() change the atime? No, no, that would
just be perverse. Nobody would be stupid enough to implement the kernel in that way.
Checked the kernel source, found that the function called when atime needs to be updated
appears to be touch_atime(). Broke out the BCC kernel tracing tools and ran this one
while running the flaky test case in a loop:
sudo trace -I<kernel src dir>/include/linux/path.h -I<same>/include/linux/dcache.h 'touch_atime(struct path *path) "%s", path->dentry->d_name.name'
Inspecting the results showed that something called "git_thread" was occcasionally updating
the atime on the directory in question!! What on earth...???
The PID shown by trace revealed that this was a background thread for Sublime Text 3.
Sublime now has git integration and shows when there are untracked or modified files. It
seems that it uses a background thread to regularly scan the project directory and look
for new and modified files. This was causing the atime to change.
Even though other developers may not be running ST3, there are any number of reasons why
a background process might recurse through various directories and could cause the atime
to change unexpectedly. Therefore, update the test case so it doesn't fail in such cases.
Closes GH-5553.
We map the POSIX semantics of `IPC_PRIVATE` by creating unnamed file
mapping objects on Windows. While that is not particularly useful for
ext/shmop, which is the only bundled extension which uses `shmget()`,
it may be useful for external extensions.
On Windows, reusing/sharing of OPcache instances with different
configuration is not necessarily supported, so we have to make that it
does not happen for the clean scripts, by using `$orig_ini_settings`
instead of `$clean_params`.
* 'PHP-7.4' of git.php.net:/php-src:
Fix#79532: sizeof off_t can be wrong
Make 045.phpt busy wait
Revert "Fix #79065: DOM classes do not expose properties to Reflection"
Bump version
Fix#79065: DOM classes do not expose properties to Reflection
Fix#79470: PHP incompatible with 3rd party file system on demand
We have to actually determine the proper `SIZEOF_OFF_T`.
Interestingly, it is `4` on Windows x64.
We also have to prevent the redefinition in pg_config.h. The clean
solution would likely be to not include pg_config.h at all, but that's
out of scope for BC reasons for now.
The timeout is only real-time based on Windows. Make this use
a busy wait loop instead. If hard_timeout is broken, this will
fail with a run-tests enforced timeout instead.
Partially reverts 846b647953: instead of
throwing, this skips uninitialized typed properties when serializing objects.
This makes serialize with __sleep() behave the same as serialize()
without __sleep().
As in the non-__sleep() case, unserialize(serialize($x)) identity
may not be preserved due to replacement of uninitialized/unset
properties with default values. Fixing this will require changes to
the serialization format.
Closes GH-5396.
When ArrayObject is round-tripped through serialize() and unserialize(),
it forgets any iterator class name which was set using ::setIteratorClass().
Fix that.
The `start` parameter of `php_cgi_ini_activate_user_config` is supposed
to hold the byte offset of the doc root in the given `path`. However,
the current expression which fixes a potential type incompatibility
will ever only evaluate to zero or one, because it uses the *logical*
and operator (`&&`). Furthermore we notice that subtracting one from
`doc_root_len` is not necessary, so there is even no need for the
`start` parameter at all.
This is the change from GH-5417 but for FPM. This was stripping the
last character from the doc_root. Given how it is used, this should
be harmless, but let's make it less confusing...
I stumbled upon this while debugging a strange issue with
stream_socket_client() where it randomly throws out errors when
the connection timeout is set to below 1s. The logic to calculate
time difference in php_openssl_subtract_timeval() is wrong when
a.tv_usec < b.tv_usec, causing connection errors before the timeout
is reached.
The DO_INIT flag, which will skip the first resume on a primed
generator, should always be set when starting to yield from a
new generator, not only when the yield from happens during priming.
There is no reason to expect a `1` after the PID; neither the session
ID nor the memory usage are required to contain one. Actually, we just
want to verify here, that the process with the $child_pid is running,
and is a php.exe process.
We have to free the retrieved text content; to keep the code readable,
we extract a helper function to check for empty nodes. Unfortunately,
we cannot use xmlIsBlankNode(), because that also recognizes whitespace
only text content.
We also make sure to properly handle NULL returns from
xmlNodeGetContent().
* PHP-7.3:
Revert "Went to fast and forgot to update tests"
Revert "Fix Bug #79448 0 is a valid Unicode codepoint, but mb_substitute_character(0) fails"
This commit brings some substantial changes in behaviour due to the weird implementation.
This will be fixed in master due to BC concerns.
This reverts commit 1333b46d6d.
We actually implement `::__debugInfo()` and drop the `get_debug_info()`
handlers of all relevant SPL classes. This is cleaner and gives more
flexibility regarding overriding the functionality in descendant
classes.
In commit a7305eb539 the last_message
field of the connection object was changed to be always non-persistent.
But there is a place on change_user path that still treats it
depending on conn->persistent flag. This will cause PHP crash after
com_change_user success when there is last_message set
The comment on `PS_VALIDATE_SID_FUNC(files)` is very clear that the
function is supposed to return `SUCCESS` if the session already exists.
So to detect a collision, we have to check for `SUCCESS`, not
`FAILURE`.
We also fix the wrong condition in session_regenerate_id() as well.
It seems like on many filesystems nlink for directories is the
number of subdirectories (plus two, due to . and ..). However,
this is not a POSIX requirement, and some filesystems don't
implement it this way. This seems to be the case for whatever is
used on the Travis AArch64 builders now.
Since `DateTimeZone` does not implement a `compare_objects` handler,
nor has any properties, two `DateTimeZone` instances always compare as
being equal, even if they designate totally different timezones. Even
worse, after calling `var_dump()` on these objects, the actual
comparison may yield a correct result.
We therefore introduce a `compare_objects` handlers, which prevents
different behavior before/after `var_dump()`, and which allows us to
clearly define the intended semantics.
The skip message must start with the word 'skip', otherwise the test will not be skipped.
*Before:*
Running selected tests.
TEST 1/1 [ext/com_dotnet/tests/bug79332.phpt]
========DIFF========
001+ Fatal error: Uncaught Error: Class 'COMPersistHelper' not found in /srv/php/ext/com_dotnet/tests/bug79332.php:2
001- A com_exception has been thrown
002+ Stack trace:
003+ #0 {main}
004+ thrown in /srv/php/ext/com_dotnet/tests/bug79332.php on line 2
========DONE========
FAIL Bug #79332 (php_istreams are never freed) [ext/com_dotnet/tests/bug79332.phpt]
*After:*
Running selected tests.
SKIP Bug #79332 (php_istreams are never freed) [ext/com_dotnet/tests/bug79332.phpt] reason: com_dotnet extension not available
To cater to potentially state-dependent encodings, we have to reset the
conversion descriptor into its initial shift state to properly finish
the conversion. Furthermore, state-dependent encodings may not show
progress when comparing `in_left` before and after the conversion; we
rather have to see whether `out_left` has decreased. Also we have to
cater to the fact that the final potentially state resetting call does
not signal failure, but we still have to break respective loops
afterwards.
We add Windows support to four existing test cases, extract some useful
utility functions, and use them to simplify further test cases.
We also remove the Windows specific code from preload.inc, since
preloading isn't supported on Windows anyway.
This is actually about three distinct issues:
* If an empty string is passed as $address to `stream_socket_sendto()`,
the `sa` is not initialized, so we must not pass it as `addr` to
`php_stream_xport_sendto()`.
* On POSIX, `recvfrom()` truncates messages which are too long to fit
into the specified buffer (unless `MSG_PEEK` is given), discards the
excessive bytes, and returns the buffer length. On Windows, the same
happens, but `recvfrom()` returns `SOCKET_ERROR` with the error code
`WSAEMSGSIZE`. We have to catch this for best POSIX compatibility.
* In `php_network_parse_network_address_with_port()`, we have to zero
`in6` (not only its alias `sa`) to properly support IPv6.
Co-Authored-By: Nikita Popov <nikita.ppv@googlemail.com>
Even though `SplStack::unserialize()` is not supposed to be called on
an already constructed instance, it is probably better if the method
clears the stack before actually unserializing.
Unfortunately, some Webservers (e.g. IIS) do not implement the (F)CGI
specifications correctly wrt. chunked uploads (i.e. Transfer-encoding:
chunked), but instead pass -1 as CONTENT_LENGTH to the CGI
application. However, our (F)CFI SAPIs (i.e. cgi and cgi-fcgi) do not
support this.
Therefore we try to retrieve the stream size in advance and pass it to
`curl_mime_data_cb()` to prevent libcurl from doing chunked uploads.
This is basically the same approach that `curl_mime_filedata()`
implements, except that we are keeping already opened streams open for
the `read_cb()`.
Some commits missed to update the patch file, so we're catching up on
this.
To generally make this easier, we back-port generate_patch.sh from
PHP-7.4, where we now also generate magic.h from magic.h.in.
We have to free the `ansiname`s, regardless of whether they have been
put into the hashtable or not.
Since bug79299.phpt already shows the leak when run with a leak
checker, there is no need for another regression test.
Releasing the `com_dotnet_istream_wrapper` in `istream_destructor()` is
pointless, since `istream_destructor()` is only called when the
resource is going to be released. This recursion is not a real issue,
though, since the resource is never exposed to userland, and has at
most refcount 1, so due to well defined unsigned integer underflow, it
never is released twice. However, returning early in this case causes
a memory leak which needs to be fixed.
For obvious reasons, we must not assign a `size_t` value to an `int`
variable using memcpy(). However, there is actually no need for the
intermediate `n_sugg_st` here, if we use the proper types in the first
place.
A regression test is not necessary, because dict_suggest.phpt already
exhibits the erroneous behavior on big endian architectures.
While `mysqli_get_client_version()` calls `mysql_get_client_version()`
to retrieve the client version, `mysql::$client_version` is initialized
to `MYSQL_VERSION_ID`. Both should match though, and since the former
is the more useful information, we fix `mysql::$client_version`.
We do not add a regression test, because it would usually succeed
anyway, and we already have several tests with respective `assert()`s.
Always push the current user_error/exception_handler to the stack,
even when it is empty, so restore_error_handler() always works as
expected.
The user_error_handler is especially temporarily empty when we are inside
the error handler, which caused inconsistent behaviour before.
The fix for feature request #53466 did not properly handle resetting of
the corresponding statement; the problem with this is that the
statement does not know about its result sets. But even if we could
fix this, the `complete` handling still appears to be brittle, since
the `sqlite3_column_type()`docs[1] state:
| If the SQL statement does not currently point to a valid row, or if
| the column index is out of range, the result is undefined.
Fortunately, we can use `sqlite3_data_count()` instead, since[2]:
| If prepared statement P does not have results ready to return (via
| calls to the sqlite3_column() family of interfaces) then
| sqlite3_data_count(P) returns 0.
Thus, we guard `SQLite3::columnType()` with `sqlite3_data_count()`, and
completely drop updating the `php_sqlite3_result_object.complete`
field, but keep it for ABI BC purposes.
[1] <https://www.sqlite.org/c3ref/column_blob.html>
[2] <https://www.sqlite.org/c3ref/data_count.html>
Firstly, we must not rely on `stmt->column_count` when freeing the
driver specific column values, but rather store the column count in
the driver data. Since the column count is a `short`, 16 bit are
sufficient, so we can store it in reserved bits of `pdo_odbc_stmt`.
Furthermore, we must not allocate new column value storage when the
statement is not executed, but rather when the column value storage has
not been allocated.
Finally, we have to introduce a driver specific `cursor_closer` to
avoid that `::closeCursor()` calls `odbc_stmt_next_rowset()` which then
frees the column value storage, because it may be still needed for
bound columns.
* PHP-7.3:
Fix # 79171: heap-buffer-overflow in phar_extract_file
Fix bug #79082 - Files added to tar with Phar::buildFromIterator have all-access permissions
Fix bug #79221 - Null Pointer Dereference in PHP Session Upload Progress
Mark bug76348.phpt as online test
Fix bug #79082 - Files added to tar with Phar::buildFromIterator have all-access permissions
Fix bug #79221 - Null Pointer Dereference in PHP Session Upload Progress
* PHP-7.2:
Mark bug76348.phpt as online test
Fix bug #79082 - Files added to tar with Phar::buildFromIterator have all-access permissions
Fix bug #79221 - Null Pointer Dereference in PHP Session Upload Progress
The primary motivation to have each test worker running its own console
is to allow the windows_mb_path tests to run in parallel. A nice side
effect is that this also prevents changing the code page of the
tester's console window (which can even cause its font to be changed).
To be able to do so, we introduce the `create_new_console` option for
`proc_open()`, which might occasionally be useful for other purposes
than testing.
To be able to see changes done only with `SetEnvironmentVariable()`, we
have to use `GetEnvironmentStrings()` instead of `environ`, because the
latter sees only changes done with `putenv()`.
For best backward compatibility we're using `GetEnvironmentStringsA()`;
switching to the wide string version likely makes sense for master,
though.
Cherry-picked the fix(not sure why this wasn't merged to 7.4) for:
Fixed bug #77589 (Core dump using parse_ini_string with numeric sections)
Section name should not be typed(NULL, FALSE, TRUE etc)
Conflicts:
Zend/zend_ini_scanner.c
If the `VT_ARRAY` is empty, i.e. its upperbound is less than its lower
bound, we must not call `php_com_safearray_get_elem()`, because that
function throws in this case.
variant objects have no (declared) properties, so the `get_properties`
handlers returns a pointer to constant storage for efficiency reasons.
This pointer must not be returned from the `get_gc` handler, though;
instead we set up an own `get_gc` handler and return NULL from it, to
signal that there are no properties to collect.
Because a `HRESULT` is a `LONG`[1], no special treatment is required on
x86 platforms to get appropriate values. On x64 platforms we prefer
positive values, what we could accomplish by casting the `HRESULT`
value to `ULONG` and then to `zend_long`, but since the current
behavior is correct and the performance improvement is negligible, we
defer that to master.
[1] <https://docs.microsoft.com/en-us/windows/win32/winprog/windows-data-types#hresult>
PCRE only validates the string starting from the start offset
(minus maximum look-behind, but let's ignore that), so we can
only remember that the string is fully valid UTF-8 is the original
start offset is zero.
We need not just the whole string to be UTF-8, but the start
position to be on a character boundary as well. Check this by
looking for a continuation byte.
To cater to `curl_copy_handle()` of cURL handles with attached
`CURLFile`s, we must not attach the opened stream, because the stream
may not be seekable, so that we could rewind, when the same stream is
going to be uploaded multiple times. Instead, we're opening the stream
lazily in the read callback.
Since `curl_multi_perfom()` processes easy handles asynchronously, we
have no control of the operation sequence. Since duplicated cURL
handles may be used with multi handles, we cannot use a single arg
structure, but actually have to rebuild the whole mime structure on
handle duplication and attach this to the new handle.
In order to better test this behavior, we extend the test responder to
print the size of the upload, and patch the existing tests accordingly.
Not all systems support the discard protocol (TCP port 9), and since
there is no particular reason to use it, we switch to using actual
server testing.
The culprit is the too restrictive fix for bug #71536, which prevents
`php_libxml_streams_IO_write()` from properly executing when unclean
shutdown is flagged. A *more* suitable solution is to move the
`xmlwriter_free_resource_ptr()` call from the `free_obj` handler to an
added `dtor_obj` handler, to avoid to write to a closed stream in case
of late object freeing. This makes the `EG(active)` guard superfluous.
We also fix bug79029.phpt which has to use different variables for the
three parts to actually check the original shutdown issue.
Thanks to bwoebi and daverandom for helping to investigate this issue.
Since we're dealing with floating point numbers, precision issues may
hit us, and actually it's not necessary to check for the exact number
anyway, because it is not exact in the first place. Therefore, we
relax the test expectations.
We have to convert to number *before* detecting the type, to cater to
internal objects implementing `cast_object`.
We also get rid of the fallback behavior of using `FORMAT_TYPE_INT32`,
because that can no longer happen; after `convert_scalar_to_number_ex`
the type is either `IS_LONG` or `IS_DOUBLE`. We cater explicitly to
the `IS_ARRAY` case what also avoids triggering a type confusion when
`::TYPE_INT64` is passed as `$type`.
Unlink the current stack frame before freeing CVs or extra args.
This means it will no longer show up in back traces that are
generated during CV destruction.
We already did this prior to destructing the object/closure,
presumably for the same reason.
The following commit introduces a cross-compilation failure:
93c728b77c
"Try to control ZEND_MM_ALIGNED_SIZE type"
br-arm-full/build/php-7.4.2/Zend/zend_alloc.h:30:38:
error: missing binary operator before token "8"
^
br-arm-full/build/php-7.4.2/ext/opcache/ZendAccelerator.c:1380:7:
note: in expansion of macro ‘ZEND_MM_ALIGNMENT’
Closes GH-5128.
The fix for bug #49634 solved a double-free by copying the node with
`xmlDocCopyNodeList()`, but the copied node is later freed by calling
`xmlFreeNode()` instead of `xmlFreeNodeList()`, thus leaking memory.
However, there is no need to treat the node as node list, i.e. to copy
also the node's siblings; just creating a recursive copy of the node
with `xmlDocCopyNode()` is sufficient, while that also avoids the leak.
I replaced it with a multiplication overflow check in
18599f9c52. However, we need both,
because the code for restoring the number can't handle numbers
with many leading zeros right now and I don't feel like teaching it.
This is going to cause a segfault if reused in the next request.
To illustrate the issue, run these two scripts in sequence with
the built-in server:
// script1.php
mb_ereg_search_init('foobar');
mb_ereg_search('foo');
// script2.php
var_dump(mb_ereg_search_init("foobar"));
var_dump(mb_ereg_search_pos());
Don't mix strlen() and ZSTR_LEN(). If the encoding contains a
NULL byte, this will overflow the buffer.
NULL bytes will still make this behave oddly because the consuming
code will cut off the string there, but let's address that in master...
The YYERROR_VERBOSE macro will no longer be supported in Bison 3.6.
It was superseded by the "%error-verbose" directive in Bison 1.875
(2003-01-01). Bison 2.6 (2012-07-19) clearly announced that support
for YYERROR_VERBOSE would be removed. Note that since Bison 3.0
(2013-07-25), "%error-verbose" is deprecated in favor of "%define
parse.error verbose".
Closes GH-5125.
In this case warning_count may be non-zero, but php_get_warnings()
may still return no warnings. In this case we should return false
rather than returning a corrupted mysqli_warning object.
The fix for bug #78929 disabled the conversion of spaces in cookie
values to plus signs, but failed to adapt `php_setcookie()`
accordingly, so that it uses raw URL encoding as well.
This is already supported by non Windows builds for libzip >= 1.3.1,
and since we're using at least libzip 1.4.0 on Windows, we should
support it there as well.
Always operate on copies of the functions, so we don't reference
temporary trait methods that have gone out of scope.
This could be more efficient, but doing an allocated copy only when
strictly necessary turned out to be somewhat tricky.
We need to extend the hash table before performing raw append
operations.
This doesn't matter if preloading happens in the same process,
as the tables will be large enough to hold all entries as a
side-effect of the preloading process. However, if preloading
happens in a different process, we need to reserve space here.
auth_plugin_data_len here is 21, including the trailing null byte.
Directly use SCRAMBLE_LENGTH instead. Also add a sanity check that
the provided scramble is long enough.
Adjust for URL change in XSD file and mark as online test.
Is it possible for use to store http://x-road.eu/xsd/xroad.xsd
locally instead? Do relative file system paths work here?
I'm not familiar with this.
While basic support for MSVCRT debugging has been added long
ago[1], the leak checking is not usable for the test suite, because we
are no longer calling `xmlCleanupParser()` on RSHUTDOWN of
ext/libxml[2], and therefore a few bogus leaks are reported whenever
ext/libxml is unloaded.
We therefore ignore memory leaks for this case. We introduce
`ZEND_IGNORE_LEAKS_BEGIN()` and `ZEND_IGNORE_LEAKS_END()` to keep
those ignores better readable, and also because these *might* be
useful for other leak checkers as well.
We also explicitly free the `zend_handlers_table` and the `p5s` to
avoid spurious leak reports.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=d756e1db2324c1f4ab6f9b52e329959ce6a02bc3>
[2] <http://git.php.net/?p=php-src.git;a=commit;h=8742276eb3905eb97a585417000c7b8df85006d4>
In the buildconf and configure batch files, Windows' cscript utility was being
run without the /e:jscript flag. This works on systems that have not had the
default .js file association changed, but if .js has been re-associated to
(say) an IDE, the batch files fail with the error message:
Input Error: There is no script engine for file extension ".js".
Remove the check of PHP_OPENSSL inside SETUP_OPENSSL. It's the
responsibility of the caller to determine whether they want to
enable openssl or not. This makes SSL detection in IMAP work,
which uses a different option.
Additionally also clarify that --with-openssl-dir cannot actually
be used to specify an OpenSSL directory -- these options just
serve as a way to enable OpenSSL in extensions without also
enabling the OpenSSL extension. They need to be renamed to
something clearer in master.
Closes GH-5091.
FTP functionality isn't enabled by default and not listed as a disabled
extension in the `php.ini` file either.
This should spare a few googles to anyone needing FTP functionality in PHP.
Closes GH-5084.
This is a backport of fcdc0a6db0
to the PHP-7.3 branch. We need to make sure that OnUpdateString
is also called for a NULL value, otherwise the reset of the encoding
at the end of the request will not work.
I believe I already tried to land this before once, but it didn't
actually end up on the PHP-7.3 branch due to a push conflict that
I only noticed just now.
ASan instrumentation does not support the MSVC debug runtime, but still
it does not make sense to enable optimizations for such builds, since
they are not meant for production usage anyway, and although memory
corruption issues are still found in optimized builds, the generated
diagnostics are close to being useless, and apparently sometimes even
outright wrong. Therefore, we disable all optimizations for ASan
instrumented builds.
We also introduce and use `ZEND_WIN32_NEVER_INLINE` for ASan enabled
builds to avoid inlining of functions, so we get even better
diagnostics.
We must not assume that the size of a function's return value is at
most `sizeof(ffi_arg)`, but rather have to use the size which already
has been determined for the return type if it is larger than
`sizeof(ffi_arg)`.
To be able to have a regression test, we export the required test
function from the zend-test extension, and make sure that the test
can be run on different platforms regardless of whether zend-tests was
built statically or dynamically.
These test cases have recently been adjusted to work with MySQL 8[1],
but some older, but still supported database versions, such as MySQL
5.6, still need the password to be sent hashed, so we fall back to
using `PASSWORD()`, if the `SET PASSWORD` query fails without it.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=b0efd18f7844da29931737b8a1cf461c7493e168>.
We use the portable {TMP} instead of the hard-coded /tmp, and skip
mysqli_debug_append.phpt on Windows, because unlinking the trace file
while the connection is still open won't work there.
(cherry picked from commit 60081ca20d)
Depending on the libcurl version and perhaps configuration, it may show
additional info (due to `CURLOPT_VERBOSE` being activated), which we
have to ignore, to avoid spurious test failures.
Due to ASLR restrictions, preloading on Windows does not work with
any code that has preloading dependencies on internal classes.
This effectively makes it unusable for any non-trivial codebase.
Instead of pretending like preloading is going to work, only to
make people realize that it really doesn't once they get beyond
a dummy example, we disable support for preloading on Windows
entirely.
Closes GH-4999.
Previously this generated a notice, but would likely generate an
Error when unserializing.
Now we treat it with the same distinction as direct property
accesses, i.e. referencing an unset/undefined normal property
stays a notice, while a typed property becomes an Error exception.
This fixed bug #79002.
Closes GH-5050.
We implement support for a fifth parameter, which allows to specify the
mapsize. The parameter defaults to zero, in which case the compiled in
default mapsize (usually 1048576) will be used. The mapsize should be
a multiple of the page size of the OS.
This test fails intermittently due to taskill reporting failure to kill
the process (because it already has been terminated). We increase the
sleep time, to hopefully prevent that from happening again.
We check that the given microsecond fraction is in the valid range
[0, 1000000[, and otherwise mark it as invalid. We also drop the
useless do loop; a plain block is sufficient here.
This causes a warning on GCC 9 and is unnecessary to boot: We
only use "cwd" for the open_basedir check, so we can just as well
pass in the original string.
This is a backport of fcdc0a6db0
to the PHP-7.3 branch. We need to make sure that OnUpdateString
is also called for a NULL value, otherwise the reset of the encoding
at the end of the request will not work.
Fix file cache serialization of property types. I'm changing the
overall type serialization format to perform additional adjustments
in order to yield a plausible pointer for zend_type, rather than
using an entirely separate serialization format, as was previously
done. That would have been annoying to extend to the case of CE
pointers.
If the script was serialized as file_cache_only (thus non-immutable)
and then gets unserialized into SHM, we need to allocate a new
run_time_cache slot and can't use the serialized arena pointer.
Instead of populating a hashtable of property names and then
directly serializing.
This has the advantage of a) detecting duplicate properties more
precisely and b) gives us the ability to discard values without
rewriting the serialization string after the fact for GH-5027.
These stats are used to check whether the file exists -- they
should not generate errors. Having the flag set is particularly
important for custom stream wrappers.
We must not use the same shared memory OPcache instance for different
SAPIs, since their memory layout is different. To avoid this, we add
the SAPI name (truncated to at most 20 characters) to the names of the
memory base file, the mutex and the file mapping.
This reverts commit b8ef7c35ab.
See bug #79031. The semantics of serialize locking aren't quite
correct right now, and the use of the lock in this particular
place makes us hit the issue in a common case. I'm reverting this
commit for PHP 7.4 and will try to fix this properly for PHP 8,
as I believe it will require ABI breakage.
The fact that conn->unix_socket is set does not mean that a Unix
socket is actually in use -- this member is set in a default
configuration.
Instead check whether a unix_socket stream ops is used.
The behavior of this is very dependent on the MySQL vendor, MySQL
version and MySQL configuration, in particular the
explicit_defaults_for_timestamp variable.
I don't think it's worthwhile to try and model this exactly, so
drop the test.
We backport the fix PHP 7.3, since this branch is affected as well.
(cherry picked from commit b5e0043796)
(cherry picked from commit e36daa6927)
(cherry picked from commit 2704ee6844)
As of PHP 7.3.0, unlinking files with open handles is possible on
Windows, but these file entries are still blocked until all open
handles are closed. Since this test doesn't require to write to the
same file, we use three separate files.
We also add the missing skip check for XMLReader.
We no longer try to retrieve the filename of a given stream when
fstat'ing, because this is very slow. Since we neither didn't do that
in PHP 7.3 and earlier, we regard this as sensible trade-off.
Don't report EAGAIN/EWOULDBLOCK as errors for fwrite on
non-blocking socket streams. This matches behavior for fread,
as well as behavior for plain file streams.
Closes GH-5026.
Some functions in libmagic (distributed with fileinfo extension) perform this sequence of calls:
func() {
setlocale(LC_TYPE, "C")
.. do some work ..
setlocale(LC_TYPE, "")
}
It effectively resets LC_TYPE if it that was set before the function call.
To avoid manipulations with current locale at all, the problematic functions
were modified to use locale-independent functions.
We need to make sure that op_data is only freed after populating
result, as op_data may be the only thing holding the value in the
case of an overloaded assignment.
This reverts the code to how it looked like in 7.3.
Finally blocks in generators may be invoked during shutdown, in
which case we don't have a stack frame. Similar to what
zend_call_function does, we still need to rethrow these exceptions,
otherwise they will be hidden (and leak).
`php_stream_write()` returns `-1` on failure now, which has to be
catered to by `SplFileObject::fputcsv()` which still is supposed to
return `false` on failure.
We need to update the value even if new_value is NULL. In particular,
it should be reset back to NULL after each request if the setting was
not specified on startup. Otherwise we leave dangling pointers.
* 'PHP-7.4' of git.php.net:php-src:
Remove DateTime class registration test
Fixed bug #78973
Fixed bug #78961 (erroneous optimization of re-assigned $GLOBALS)
* PHP-7.3:
Fixed bug #78910Fix#78878: Buffer underflow in bc_shift_addsub
Fix test
Fix#78862: link() silently truncates after a null byte on Windows
Fix#78863: DirectoryIterator class silently truncates after a null byte
Fix#78943: mail() may release string with refcount==1 twice
* PHP-7.2:
Fixed bug #78910Fix#78878: Buffer underflow in bc_shift_addsub
Fix test
Fix#78862: link() silently truncates after a null byte on Windows
Fix#78863: DirectoryIterator class silently truncates after a null byte
Since the constructor of DirectoryIterator and friends is supposed to
accepts paths (i.e. strings without NUL bytes), we must not accept
arbitrary strings.
Since we need `headers_lc` as well as `headers_trim` in the following,
we do not release the former even if they are the same string, to avoid
complicating the release logic even more.
A new test case is not necessary, since we already have
mail_basic_alt2-win32.phpt and others.
Also generate a fatal error if a collision occurs in zend_compile.
This is not perfect, because collisions might still be introduced
via opcache, if one file is included multiple times during a request,
invalidate in the meantime and recompiled by different processes.
This still needs to be addressed, but this patch fixes the much
more common case of collisions occuring when opcache is not used.
Fixes bug #78903.
We switch the cookie value parsing function from `php_url_decode()` to
`php_raw_url_decode()`, so that cookie values are now parsed according
to RFC 6265, section 4.1.1. We also refactor to remove duplicate code
without changing the execution flow.
We need to make sure that trait methods with static variables
allocate a separate MAP slot for the static variables pointer,
rather than working in-place.
I wasn't able to create a simple reproducer for this. General approach
is the same as for anonymous classes: If the key is already used, reuse
the old definition.
GCC complained about potentially uninitialized __orig_bailout,
even though the variable has an initializer. This warning was
quite persistent, I was only able to avoid it by using a separate
function.
Am I missing something?
Formerly, the error message was like:
| Can't preload unlinked class MyException: Internal parent (Windows
| only limitation)Exception
Now it's like:
| Can't preload unlinked class MyException: Windows can't link to
| internal parent Exception
During preloading, check that all classes that have been included
as part of the preload script itself (rather than through opcache_compile_file)
can actually be preloaded, i.e. satisfy Windows restrictions, have
resolved initializers and resolved property types. When resolving
initializers and property types, also autoload additional classes.
Because of this, the resolution runs in a loop.
Due to former restrictions of the libcurl API, curl multipart/formdata
file uploads supported only proper files. However, as of curl 7.56.0
the new `curl_mime_*()` API is available (and already supported by
PHP[1]), which allows us to support arbitrary *seekable* streams, which
is generally desirable, and particularly resolves issues with the
transparent Unicode and long part support on Windows (see bug #77711).
Note that older curl versions are still supported, but CURLFile is
still restricted to proper files in this case.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=a83b68ba56714bfa06737a61af795460caa4a105>
(cherry picked from commit c68dc6b5e3)
As of curl 7.56.0, `curl_formadd()` is deprecated in favor of
`curl_mime_*()`, so we use the latter if available.
(cherry picked from commit a83b68ba56)
When we change back the bucket key on a class linking failure,
make sure to reload the bucket pointer, as the class table may
have been reallocated in the meantime.
Also remove a bogus bucket key change in anon class registration:
We don't actually rename the class in this case anymore, the RTD
key is already the final name.
We already changed the behavior for __set() in f1848a4. However, it
seems that this is also a problem for all the other property magic,
see bug #78904.
This commit makes the behavior of all the property magic consistent:
Magic will not be triggered for uninitialized typed properties, only
explicitly unset() ones. This brings behavior more in line how
non-typed properties behave and avoids WTF.
Closes GH-4974.
The "return" in the for loop should have been a break on the switch,
otherwise the result is just ignored... but because it prevents
evaluation of the other operand, it also violates the invariant that
everything has been constant evaluated, resulting in an assertion
failure.
The for loop isn't correct in any case though, because it's not legal
to determine the result based on just the second operand, as the
first one may have a side-effect that cannot be optimized away.
After taking a more detailed look at our commonly failing timeout
tests... turns out that most of them are useless as written and
don't test what they're supposed to.
This PR has a couple of changes:
* Tests for timeout in while/for/foreach should just have the loop
as an infinite loop. Calling into something like busy_wait means
that we just end up always testing whatever busy_wait does.
* Tests for timeouts in calls need to be based on something like
sleep, otherwise we'd have to introduce a loop, and we'd end up
testing timeout of the looping structure instead. Using sleep only
works on Windows, because that's the only system where sleep counts
towards the timeout. As such, many of those tests are now Windows only.
* Removed some tests where I don't see a good way to test what they're
supposed to test. E.g. how can we test a timeout in eval() specifically?
The shutdown function tests are marked as XFAIL, as we are currently
missing a timeout check in call_user_function. I believe that's a
legitimate issue.
Closes GH-4969.
First, make sure the tests are skipped if we connect via unix
socket, as we can't use SSL in that case.
Second, use a cipher that is not blacklisted in current MySQL
versions.
The problem is newer binutils will no longer default to --copy-dt-needed-entries but use --no-copy-dt-needed-entries instead. So all libraries needed *must* be provided.
Workarounds (either one works)
1) Add "-Wl,--copy-dt-needed-entries" to LDFLAGS to bring back the old behavior of the linker
2) Add "-lz" to list of libraries to be added
In "ext/mysqlnd/mysqlnd_protocol_frame_codec.c" when the "zlib.h" header is included should also trigger adding '-lz' to the list of libraries.
We add the `is_seekable` member to `php_stdio_stream_data`, and prefer
that over `is_pipe`, since the latter is simply a misnomer. We keep
`is_pipe` for now for Windows only, though, because we need special
support for pipes there. We also fix the misaligned bitfield which
formerly took 33 bit.
When normalizing tags to check whether they are contained in the set
of allowable tags, we must not strip slashes, unless they come
immediately after the opening `<`, or immediately before the closing
`>`.
If we're constructing extended-length paths (i.e. paths prefixed with
`\\?\`), we have to replace all forward slashes with backward slashes,
because the former are not supported by Windows for extended-length
paths.
The more efficient and likely cleaner alternative solution would be to
cater to this in `php_win32_ioutil_normalize_path_w()` by always
replacing forward slashes, but that might break existing code. It
might be sensible to change that for `master`, though.
This partially reverts commit c55d09c2f5,
because `MB_ONIGURUMA_VERSION` is only available as of PHP 7.4.0, so
that change made no sense for PHP-7.3; we keep it for PHP-7.4, though.
We also stick with the modification to bug78633.phpt.
Apparently, bug 78633 has now really been fixed; the former fix only
catered to the buffer overflow, but yielded a wrong result. Also,
the order of the named captures has been fixed.
We no longer protect GC during the destroy phase, so we need to
deal with buffer reallocation.
Note that the implementation of spl_SplObjectStorage_free_storage
will call the destructor of SplObjectStorage, and free the instance properties,
which I think is what caused the root buffer to be reallocated.
(`current` is a pointer for an index within the root buffer?)
This fixes bug #78811 for me.
Closes GH-4935
Apparently, this has not been tested for a long time, and might be a
refactoring relict. Anyhow, we have to pass the context to
`GIFNextPixel` as well.
We noticed the BC break when testing `curl_setopt()`, and hadn't interpreted
this note as affecting internal functions in general, so this adds a sub-bullet
to note that.
This overlaps a bit with the previous bullet, but since I don't know exactly
which operations were in mind at the time, I've elected to preserve them both.
Bits are cheap.
And `$x = !$x`
Noticed while working on GH-4912
The included test would not emit undefined variable errors in php 8.0
with opcache enabled. The command used:
```
php -d zend_extension=opcache.so --no-php-ini -d error_reporting=E_ALL \
-d opcache.file_cache= -d opcache.enable_cli=1 test.php
```
Postpone signal delivery while spawning children.
Prevent the following case:
- Reload (reexec) is in progress.
- New master is forking to start enough children for pools
where `pm` is not `on-demand`.
- Another `SIGUSR2` is received by the master process.
- Master process switches to reloading state.
- Some child has not set its own signal handlers.
- `SIGQUIT` and `SIGTERM` sent by master process are caught
by signal handler set by master process and so they are ignored.
- A child is running, it has no reason to finish
Before pull request #4465 this scenario could cause deadlock,
however with 0ed6c37140 reload finishes after `SIGKILL`.
Use sigprocmask() around fork() to avoid race of delivery signal to children
and setting of own signal handlers.
Fixes bug #76601
Opcache stores `opline->handler`s in shared memory. These pointers are
invalid, if the main PHP DLL is loaded at another base address due to
ASLR. We therefore store the address of `execute_ex` in the mmap base
file, and check on startup whether it matches its current address. If
not, we fall back on the file cache if enabled, and bail out otherwise.
This still does not address cases where the opline handler is located
inside of another DLL (e.g. for some profilers, debuggers), but there
seems to be no general solution for now.
(cherry picked from commit 8ba10b8fbc)
We use the portable {TMP} instead of the hard-coded /tmp, and skip
mysqli_debug_append.phpt on Windows, because unlinking the trace file
while the connection is still open won't work there.
Clear the OpenSSL error queue before performing SSL stream operations.
As we don't control all code that could possibly be using OpenSSL,
we can't rely on the error queue being empty.
Time flies, so obviously the reported uptime may differ a bit (as
already occasionally noticed on CI); we cater to that by allowing a
delay of up to one second.
This reverts commit edccf32f7f.
This was reported to cause issues for as yet unknown reasons in
bug #78769. As this was intended as code cleanup, revert this from
7.4 at least. May reapply it to master later.
The string held by the zend_type may be released if the property
type gets resolved to a CE. I initially wanted to fix this by
storing a zend_type* instead (so the property type resolution
propagates to the ReflectionType), but decided against this in
light of upcoming union types support, where we also need to
represent parts of the union, and will not have a single zend_type*
we can reference.
These were checking whether the instruction set is supported by
the host CPU, however they were only used to condition on whether
this instruction set is targeted at all. It would still use dynamic
dispatch (e.g. based on ifunc resolvers) to select the actual
implementation. Whether the target is guaranteed to support the
instruction set without dispatch is determined based on pre-defined
macros like __SSE2__.
This removes the configure-time builtin cpu checks to remove
confusion. Additionally this allows targeting an architecture that
is newer than the host architecture.
First, the limitation already doesn't trigger if you copy the whole
file (i.e. use copy() or stream_copy_to_stream() and don't specify
a length). This happens because length will be 0 at the time of the
check and only later calculated based on the file size. This means
that we're already completely blowing the length limit for what is
likely the most common case, and it doesn't seem like anyone complained
about that.
Second, the premise of the code comment ("to avoid runaway swapping")
seems incorrect to me. Because this performs a file-backed non-private
mmap, no swap backing is needed for the mapping. Concerns over "memory
usage" are also misplaced, as this is a virtual mapping.
Use the shared empty array from ZVAL_EMPTY_ARRAY
For code that created an 10 arrays of 100000 empty arrays
(has the same result with `$assoc=true` and `{}`)
- This is the worst-case comparison, but I'd expect 0-length arrays to be fairly
common in regular data for json_decode
- The parser implementation was using function pointers so that third party
extension developers could reuse the json parser for their own
data structures, etc. (I think).
This PR is meant to let those third party extensions continue working
without changes.
Before this patch: In 0.126 seconds: added 97.99 MiB
After this patch: In 0.096 seconds: added 41.99 MiB
```php
<?php
$json = '[' . str_repeat('[],', 100000) . "null]";
$start_memory = memory_get_usage();
$start_time = microtime(true);
$result = [];
for ($i = 0; $i < 10; $i++) {
$result[] = json_decode($json);
}
$end_memory = memory_get_usage();
$end_time = microtime(true);
// Before this patch: In 0.126 seconds: added 97.99 MiB
// After this patch: In 0.096 seconds: added 41.99 MiB
printf("In %.3f seconds: added %.2f MiB\n", $end_time - $start_time, ($end_memory - $start_memory)/1000000);
// For objects
$json = '[' . str_repeat('{},', 100000) . "null]";
$start_memory = memory_get_usage();
$start_time = microtime(true);
for ($i = 0; $i < 10; $i++) {
$result[] = json_decode($json, true);
}
$end_memory = memory_get_usage();
$end_time = microtime(true);
// Before this patch: In 0.126 seconds: added 97.99 MiB
// After this patch: In 0.096 seconds: added 41.99 MiB
printf("In %.3f seconds: added %.2f MiB (objects decoded as arrays) \n", $end_time - $start_time, ($end_memory - $start_memory)/1000000);
```
Closes GH-4861.
To work around the limitation of the current rudimentary vectorcall
support in our patched libffi, we forbid yet unsupported declarations,
i.e. float/double parameters at certain positions (SIMD vector types
and HVA types are not supported anyway).
When getting the properties of a DatePeriod instance we have to retain
the proper classes, and when restoring a DatePeriod instance we have to
cater to DateTimeImmutable instances as well.
NULL out the execute_data before destroying it, otherwise GC may
trigger while the execute_data is partially destroyed, resulting
in double-frees.
The handling of call stack unfreezing is a bit awkward because it's
a ZEND_API function, so we can't change the signature.
For some reason FD 120 seems to exist on macos quite often, while
FD 12 did not... Let's try an even larger number, otherwise we
should just drop this test.
We need to install a number of additional packages that are installed
by default on the AMD64 workers.
We also have to manually set up the MySQL user.
For now we don't set up Postgres -- if anyone wants to figure that
out, it would be great ;)
Log redirections in compile.sh are removed, because /dev/stdout is
not accessible. We don't see to use this anyway.
Assigning to an uninitialized typed property will no longer trigger
a call to __set(). However, calls to __set() are still triggered if
the property is explicitly unset().
This gives us both the behavior people generally expect, and still
allows ORMs to do lazy initialization by unsetting properties.
For PHP 8, we should fine a way to forbid unsetting of declared
properties entirely, and provide a different way to achieve lazy
initialization.
instanceof_function() requires linked classes. I'm not reusing
unlinked_instanceof() here, because it performs class loading,
which wouldn't be right here, I think.
Parent interfaces are copied into the interface list during
inheritance, so there's no need to perform a recursive check.
Only exception are instanceof checks performed during inheritance
itself. However, we already have unlinked_instanceof for this
purpose, it just needs to be taught to handle this case.
Closes GH-4857.
instanceof_class does not need to check for a NULL pointer in the
first iteration -- passing NULL to this function is illegal.
instanceof_interface does not need to use instanceof_class(), it
only has to check whether the CEs match exactly. There is no way
for an interface to appear inside "parent", it will always be in
"interfaces" only.
The instanceof_interface_only() function was dead code (always
returned zero).
Clarify that the last parameter indicates whether the passed CE
is interface or class and rewrite the code in terms of assertions.
I'm not totally sure, but I have a strong suspicion that the fact
that this produces an error is an artifact of undefined cast behavior
(which will yield INDVAL on x86 but saturate on ARM). INF seems to
be the only value that results in an error even on x86 (variations
like -INF or NAN succeed).
It might make sense to just remove this test entirely, but for now
let's skip it on non-x86.
This stat property seems to be somewhat unreliable depending on the
filesystem. On Travis ARM64 CI a much larger payload is required
to get this value to increase.
Noticed while working on union types: We do not load argument and
return types during type checks, but we do load property types.
I'm normalizing the behavior towards the existing status quo (not
loading), though we may consider loading everywhere (all types,
and instanceof) in order to properly support class aliases.
Fix PHP-FPM failure in the case of concurrent reload attempts.
Postpone signal delivery to the fpm master process till proper signal
handlers are set. Prevent the following case:
- Running master process receives `SIGUSR2` and performs `execvp()`.
- Another `SIGUSR2` is arrived before signal handlers are set.
- Master process dies.
- Requests to the HTTP server handled by PHP-fpm can not be served
any more.
Block some signals using `sigprocmask()` before `execvp()` and early
in the `main()` function. Unblock signals as soon as proper
handlers are set.
Fixes bug #74083
`write_dimension` object handlers have to be able to handle `NULL`
`offset`s; for now we simply throw an exception instead of following
the `NULL` pointer.
Emitting errors is fairly expensive, to the point that parsing
a file with a huge number of invalid tags can take seconds.
Generating ten thousand errors is unlikely to help anybody, but
constitutes a potential DOS vector.
Update array access syntax deprecated in line 175 and 204
Deprecated: Array and string offset access syntax with curly braces is deprecated in /home/alex/php/hello/ext_skel.php on line 175
Deprecated: Array and string offset access syntax with curly braces is deprecated in /home/alex/php/hello/ext_skel.php on line 204
Property types are invariant, but may still have to load classes in
order to check for class aliases. This class loading should follow
the same rules as all other variance checks, rather than just
loading unconditionally.
This change integrates property type invariance checks into the
variance system as a new obligation type, and prevent early binding
if the type check cannot be performed.
Notice: Undefined property: Test::$x in %s on line %d
NULL
Loaded 100 of 1842 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Derick Rethans