`phar_path_check()` already strips a leading slash, so we must not
attempt to strip the trailing slash from an now empty directory name.
Closes GH-6508.
Like Cygwin, this platform needs to use a real-time timer.
This was based on a patch by @kadler, but it didn't handle unsetting
the timer, so the timeout would continue to be active, triggering
`hard_timeout` unexpectedly. The patch is fixed to handle unsetting.
Closes GH-6503.
Like the test title and some comments in this test describe, this test
was supposed to have `::prepare()` failing because `LOAD DATA INFILE`
would not be supported as prepared statement, and then the test checks
whether follow-up queries would succeed. However, `LOAD DATA INFILE`
is supported for prepared statements at least on Windows with mysqlnd,
so the test does no longer test what it is supposed to do. Therefore,
we drop it.
Closes GH-6509.
When we receive an error while reading a result set, we should
assume that no more result sets are available. libmysqlclient
implements the same behavior.
When `php_zlib_deflate_filter()` is called with `PSFS_FLAG_FLUSH_INC`
but without new buckets being available (e.g. because a user calls
`rewind()` after writing to the stream), we have to make sure that any
pending data are flushed. This could basically be done like in the
attached patch[1], but that could cause unnessary flushes, which can be
harmful for compression, and adds unnecessary flush markers to the
stream. Thus, we use the `php_zlib_filter_data.finished` field, which
has not been used for `zlib.deflate` filters, and properly keep track
of the need to flush.
[1] <https://bugs.php.net/patch-display.php?bug_id=48725&patch=zlib-filter-flush-fix.patch&revision=latest>
Closes GH-6019.
Reading from a stream may return greater than zero, but nonetheless the
stream's EOF flag may have been set. We have to cater to this
condition by setting the close flag for filters.
We also have to cater to that change in the zlib.inflate filter:
If `inflate()` is called with flush mode `Z_FINISH`, but the output
buffer is not large enough to inflate all available data, it fails with
`Z_BUF_ERROR`. However, `Z_BUF_ERROR` is not fatal; in fact, the zlib
manual states: "If deflate returns with Z_OK or Z_BUF_ERROR, this
function must be called again with Z_FINISH and more output space
(updated avail_out) but no more input data, until it returns with
Z_STREAM_END or an error." Hence, we do so.
Closes GH-6001.
If there is no result set (e.g. for upsert queries), still allow
fetching to occur without error, i.e. treat it the same way as
an empty result set.
This normalizes behavior between native and emulated prepared
statements and addresses a regression in PHP 7.4.13.
Apparently, there are broken tarballs out there which are actually in
ustar format, but did not write the `ustar` marker. Since popular tar
tools like GNU tar and 7zip have no issues dealing with such tarballs,
Phar should also be more resilient.
Thus, when the first checksum check of a tarball in (presumed) in old-
style format fails, we check whether the checksum would be suitable for
ustar format; if so, we treat the tarball as being in ustar format.
Closes GH-6479.
In MariaDB-10.4.3 EXPIRE passwords where supported for
MariaDB. This only behaves like MySQL when the system
variable disconnect_on_expired_passwords=1.
MariaDB if there was no password it could not be considered
expired. So the test is adjusted to use actual passwords.
(MariaDB commit a94b20a8e0d9e64eeaabdaaa7a3e03fcdb8a686e)
The error codes produced my MariaDB are different
however still conforming to the SQL specification.
Closes GH-6480.
MariaDB extended the default decimal field to 39 characters
instead of MySQL's 31 characters.
This small change allows the test to pass on MySQL and MariaDB.
Closes GH-6484.
Phar signatures practically are of limited size; for the MD5 and SHA
hashes the size is fixed (at most 64 bytes for SHA512); for OpenSSL
public keys there is no size limit in theory, but "64 KiB ought to be
good enough for anybody". So we check for that limit, to avoid fatal
errors due to out of memory conditions.
Since it is neither possible to have the signature compressed in the
ZIP archive, nor is it possible to manually add a signature via Phar,
we use ZipArchive to create a suitable archive for the test on the fly.
Closes GH-6474.
Apparently treating LibreSSL as OpenSSL 1.1 is not just something
we did in our code, it's something that upstream LibreSSL claims,
despite not actually being compatible. Duh.
Check for EVP_CIPH_OCB_MODE instead, which should reliably
determine support...
We avoid `YYCURSOR` becoming `NULL` by initializing `YYMARKER`, and add
a default rule for `<NORMAL>` where we catch unexpected input.
We also fix the only superficially related issue regarding empty input
followed by `T_SEPARATOR` and command, which caused another segfault.
Closes GH-6464.
Our CPU detection code currently only checks whether hardware
support for AVX exists. However, we also need to check for operating
system support for XSAVE, as well as whether XCR0 has the SSE and
AVX bits set.
If this is not the case, unset the AVX and AVX2 bits in the cpuinfo
structure.
Hopefully this resolves our issues with CPU support detection.
Closes GH-6460.
MySQL removed RENAME DATABASE in 18300001c1dbbfddf9a0adcbaeea68956102bdd0
(Sept 2007, 5.1.23). As this briefest existance is very insignificant lets remove it.
It also breaks when testing against MariaDB.
As the alternate path in this test covers all supported MySQL and MariaDB
versions and a signifant portion of unsupported versions lets keep it simple.
Closes GH-6459.
Rename the methods in MessageFormatAdapter to make sure they don't
clash with anything defined by icu itself, which may be a problem
if icu is linked statically.
The current behavior has been introduced 20 years ago in
f9e375f493 as part of a larger change.
It's not clear to me why special treatement of -lpthread is necessary
here.
References to null-serializations are stored as null, and as such
are part of the reference count.
Reminds me that we really need to deprecate the mess that is
Serializable.
Reindent ext/mysqli tests on PHP-7.4, so they match with the
indentation on PHP-8.0. Otherwise merging test changes across
branches is very unpleasant.
In the somewhat unlikely case that `zend_fstat()` fails, we must not
proceed executing the function, but return `false` instead.
Patch based on the patch contributed by sagpant at microsoft dot com.
Closes GH-6432.
`\r\n` does only terminate a header, if not followed by `\t` or ` `.
We have to cater to that when determining the end position of the
respective headers.
Closes GH-6420.
We must not redefine the version "constants" for phpize builds, because
these have already generated in phpize.js, from where we pass these
variables forward to configure.js.
We also add `PHP_EXTRA_VERSION` and `PHP_VERSION_STRING` to the files
for completeness.
Closes GH-6419.
For x ? y : z style structures, the live range starts at z, but
may also hold the value of y. Make sure that the refcounting check
takes this into account, by checking the type of a potential phi
user.
Failure to rebind such closures is not necessarily related to them
being created by `ReflectionFunctionAbstract::getClosure()`, so we fix
the error message.
Closes GH-6424.
If there is a previous use of the new variable in the phi, we need
to NULL out the use chain of the new source we're adding.
Test case is reduced from an assertion failure in the Symfony Demo.
This cherry-picks 33969c2252 and
2effbfd871 from PHP-8.0.
The issues these commits fix could also manifest in PHP 7.4, and
a commenter on bug #80307 reports this this might indeed be
happening.
As of commit 81b2f3e[1], `parse_url()` accepts URLs with a zero port,
but does not report that port, what is wrong in hindsight.
Since the port number is stored as `unsigned short` there is no way to
distinguish between port zero and no port. For BC reasons, we thus
introduce `parse_url_ex2()` which accepts an output parameter that
allows that distinction, and use the new function to fix the behavior.
The introduction of `parse_url_ex2()` has been suggested by Nikita.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=81b2f3e5d9fcdffd87a4fcd12bd8c708a97091e1>
Closes GH-6399.
We should use normal function renaming if the function is declared
during preloading itself, rather than afterwards.
This fixes a regression introduced by
68f80be9d1.
JIT ignores that the `zend_write` callback is overwritten, so we define
our own callback and caller.
We also fix the "inconsistent DLL binding" warnings on Windows, by
introducing `PHP_ZEND_TEST_API`.
Closes GH-6391.
We cannot simply switch to use_result here, because the fetch_row
methods in get_result mode and in use_result/store_result mode
are different: In one case it accepts a statement, in the other
a return value zval. Thus, doing a switch to use_result results
in a segfault when trying to fetch a row.
Actually supporting get_result with cursors would require adding
cursor support in mysqlnd_result, not just mysqlnd_ps. That would
be a significant amount of effort and, given the age of the issue,
does not appear to be particularly likely to happen soon.
As such, we simply generate an error when using get_result()
with cursors, which is much better than causing a segfault.
Instead, parameter binding needs to be used.
The EOF flag also gets set on error, so we always end up ignoring
errors here.
However, we should only check errors for unbuffered results. For
buffered results, this function is guaranteed not to error, and
querying the errno may return an unrelated error.
Unless `SQLGetData()` returns `SQL_SUCCESS` or `SQL_SUCCESS_WITH_INFO`,
the `StrLen_or_IndPtr` output argument is not guaranteed to be properly
set. Thus we handle retrieval failure other than `SQL_ERROR` by
yielding `false` for those column values and raising a warning.
Closes GH-6281.
Set error_info when we fail to read a packet, instead of throwing
a warning. Additionally we also need to populate the right
error_info in rowp_read -- we'll later take the error from the
packet, not the connection.
No test case, as this is hard to reliably test. I'm using the
test case from:
https://github.com/php/php-src/pull/2131#issuecomment-538374838
We have to error on unhandled exceptions in FFI callbacks, to avoid
passing back undefined values.
This has been discussed and agreed upon in a previous PR[1].
[1] <https://github.com/php/php-src/pull/5120>
Closes GH-6366.
Report errors autocommit, commit, rollback and mysqli_stmt_attr_set.
Additionally, copy the error from conn to stmt when preparing fails,
so these errors are also handled by mysqli_stmt_prepare.
Closes GH-6157.
Make sure deadlock errors are properly propagated and reports in
a number of places in mysqli and PDO MySQL.
This also fixes a memory and a segfault that can occur under these
conditions.
This reverts commit bf6873a18e.
CVE-2020-26159 is bogus; the "bug" was apparently a false positive
reported by Coverity, and the "fix" apparently wrong, see
<https://github.com/kkos/oniguruma/issues/221>.
Closes GH-6357.
libxml2 has no particular issues parsing HTML strings with NUL bytes;
these just cause truncation of the current text content, but parsing
continues generally. Since `::loadHTMLFile()` already supports NUL
bytes, `::loadHTML()` should as well.
Note that this is different from XML, which does not allow any NUL
bytes.
Closes GH-6368.
A recent bug fix regarding symlinks claimed:
> After resolving reparse points, the path still may be a reparse
> point; in that case we have to resolve that reparse point as well.
While that is basically correct, some reparse points may point to
inaccessible system folders (e.g. `IO_REPARSE_TAG_DEDUP` points to
"\System Volume Information"). Since we don't know details about
arbitrary reparse points, and are mainly interested in nested symlinks,
we take a step back, and only resolve `IO_REPARSE_TAG_SYMLINK` for now.
Close GH-6354.
`ADD_EXTENSION_DEP()` relies on the `PHP_<extname>` config variables to
be set to `"yes"`, and since the standard and date extension are always
enabled, we define the respective variables uncoditionally.
Closes GH-6383.
"Uninitialized" here means that the object was created ordinarily
-- no constructor skipping involved. Most tidy methods seem to
handle this fine, but these three need to be guarded.
libc-client expects `TYPEMESSAGE` with an explicit subtype of `RFC822`
to have a `nested.msg` (otherwise there will be a segfault during
free), but not to have any `contents.text.data` (this will leak
otherwise).
Closes GH-6345.
In libc-client 2007f `data` is declared as `unsigned char *`; there may
be variants which declare it as `void *`, but in any case picky
compilers may warn about a pointer type mismatch in the conditional
(and error with `-W-error`), so we're adding a `char *` cast for good
measure.
The original fix for that bug[1] broke the formerly working composition
of message/rfc822 messages, which results in a segfault when freeing
the message body now. While `imap_mail_compose()` does not really
support composition of meaningful message/rfc822 messages (although
libc-client appears to support that), some code may still use this to
compose partial messages, and using string manipulation to create the
final message.
The point is that libc-client expects `TYPEMESSAGE` with an explicit
subtype of `RFC822` to have a `nested.msg` (otherwise there will be a
segfault during free), but not to have any `contents.text.data` (this
will leak otherwise).
[1] <http://git.php.net/?p=php-src.git;a=commit;h=0d022ddf03c5fabaaa22e486d1e4a367ed9170a7>
Closes GH-6343.
While OpenSSL 1.1 allows unconditionally setting the CCM tag length
even for decryption, some older versions apparently do not. As such,
we do need to treat CCM and OCB separately after all.
OCB mode ciphers were already exposed to openssl_encrypt/decrypt,
but misbehaved, because they were not treated as AEAD ciphers.
From that perspective, OCB should be treated the same way as GCM.
In OpenSSL 1.1 the necessary controls were unified under
EVP_CTRL_AEAD_* (and OCB is only supported since OpenSSL 1.1).
Closes GH-6337.
openssl_encrypt() currently throws a warning if the $tag out
parameter is passed for a non-authenticated cipher. This violates
the principle that a function should behave the same if a parameter
is not passed, and if the default value is passed for the parameter.
I believe this warning should simply be dropped and the $tag be
populated with null, as is already the case. Otherwise, it is not
possible to use openssl_encrypt() in generic wrapper APIs, that are
compatible with both authenticated and non-authenticated encryption.
Closes GH-6333.
If unsupported `$search_criteria` are passed to `imap_sort()`, the
function returns an empty array, but there is also an error on the
libc-client error stack ("Unknown search criterion: UNSUPPORTED
(errflg=2)"). If, on the other hand, unsupported `$criteria` or
unsupported `$flags` are passed, the function returns `false`. We
solve this inconsistency by returning `false` for unsupported
`$search_criteria` as well.
Closes GH-6332.
At least on Windows, some static variables are lazily initialized
during `mail_open()` and `mail_lsub()`, which are reported as memory
leaks. We suppress these false positives.
Closes GH-6326.
The message patterns can be pretty complex, so reporting a generic
U_PARSE_ERROR without any additional information makes it needlessly
hard to fix erroneous patterns.
This commit makes use of the additional UParseError* parameter to
umsg_open to retrieve more details about the parse error to report that
to the user via intl_get_error_message()
Additional improve error reporting from the IntlMessage constructor.
Previously, all possible failures when calling IntlMessage::__construct()
would be masked away with a generic "Constructor failed" message.
This would include invalid patterns.
This commit makes sure that the underlying error that caused the
constructor failure is reported as part of the IntlException error
message.
Closes GH-6325.
Unless `topbod` is of `TYPEMULTIPART`, `mail_free_body()` does not free
the `nested.part`; while we could do this ourselves, instead we just
ignore additional bodies in this case, i.e. we don't attach them in the
first place.
Closes GH-6321.
X509_PURPOSE_OCSP_HELPER, X509_PURPOSE_TIMESTAMP_SIGN are available
from OpenSSL for many years:
- X509_PURPOSE_OCSP_HELPER, since 2001
- X509_PURPOSE_TIMESTAMP_SIGN, since 2006
Also drop the ifdef check for X509_PURPOSE_ANY, as it is always
available in supported OpenSSL versions.
Closes GH-6312.
If the RHS has INDIRECT elements, we do not those to be added to
the LHS verbatim. As we're using UPDATE_INDIRECT, we might even
create a nested INDIRECT that way.
This is a side-quest of oss-fuzz #26245.
We separate the input arrays and all sub-arrays to avoid modification
of the passed parameters.
This should be rewritten to use `zend_string`s for the "master" branch.
Closes GH-6316.
The documentation of `tidyNode::isHtml()` states that this method
"checks if a node is part of a HTML document". That is, of course,
nonsense, since a tidyNode is "an HTML node in an HTML file, as
detected by tidy."
What this method is actually supposed to do is to check whether a node
is an element (unless it is the root element). This has been broken by
commit d8eeb8e[1], which assumed that `enum TidyNodeType` would
represent flags of a bitmask, what it does not.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=d8eeb8e28673236bca3f066ded75037a5bdf6378>
Closes GH-6290.
There is no such thing as the "end of the unix epoch", and if it was,
it would certainly not be 2037-10-11T02:00:00. There is, however,
potential integer overflow which we need to avoid.
Closes GH-6288.
It is mandatory to pass either `SQL_NO_NULLS` or `SQL_NULLABLE` as
tenth parameter to `SQLSpecialColumns()`; otherwise the function call
fails. Therefore the user must be allowed to pass the desired value
as parameter to `odbc_specialcolumns()` again.
Closes GH-6200.
We have to log errors in `stream_opener` callbacks to the wrapper's
error log, because otherwise we may pick up an unrelated `errno` or a
most generic message.
Closes GH-6187.
libcurl 7.62.0 introduced a maximum protocol length of 8, so this test
case failed with `CURLE_URL_MALFORMAT`. While this is lifted to 40 as
of libcurl 7.65.0, and this test case has already been fixed with
commit e27301c[1], we restore the original intention to check for a
`CURLE_UNSUPPORTED_PROTOCOL ` error.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=e27301c7b37f6a1643a0dc1966919bd62a32bc74>
If restoring of any not registered built-in wrapper is requested, the
function is supposed to fail with a warning, so we have to check this
condition first.
Furthermore, to be able to detect whether a built-in wrapper has been
changed, it is not sufficient to check whether *any* userland wrapper
has been registered, but rather whether the specific wrapper has been
modified.
Closes GH-6183.
Passing `NULL` as `lpFileSizeHigh` to `GetFileSize()` gives wrong
results for files larger than 0xFFFFFFFF bytes. We fix this by using
`GetFileSizeEx()`, and let the mapping fail, if the file size is too
large for the architecture.
Closes GH-5319.
Instead of attempting to map large files into memory at once, we map
chunks of at most `PHP_STREAM_MMAP_MAX` bytes, and repeat that until we
hit the point where `php_stream_seek()` fails (see bug 54902), and copy
the rest of the file by reading and writing small chunks.
We also fix the mapping behavior for zero bytes on Windows, which did
not error (as with `mmap()`), but would have mapped the remaining file.
URIs with a 0 port are generally valid, so `parse_url()` should
recognize such URIs, but still report the port as missing.
Co-authored-by: twosee <twose@qq.com>
Closes GH-6152.
MariaDB versioning created a mess with regarding testing
features based on version. We sidestep the problem here
by assuming the extensions are present, and if a syntax
error occurs with a SQL mode TRANS_START_READ_WRITE |
TRANS_START_READ_ONLY enabled, then output the same
warning as before.
Travis on 7.3 is showing this error:
> The size of BLOB/TEXT data inserted in one transaction is greater
> than 10% of redo log size. Increase the redo log size using
> innodb_log_file_size.
Force MyISAM engine to avoid this.
* PHP-7.3:
Fix bug #80107: Handling of large compressed packets
Bug #80107 Add test for mysqli_query() fails for ~16 MB long query when compression is enabled
There's two layers of packet splitting going on. First, packets
need to be split into having a payload of exactly 2^24-1 bytes or
being the last packet. If the split packet has size between 2^24-5
and 2^24-1 bytes, the compressed packets also needs to be split,
though the choice of split doesn't matter here. I'm splitting off
the first 8192 bytes, as that's what I observe libmysqlclient to be
doing.
Tested with:
* mysql-5.6.49-linux-glibc2.12-x86_64
* mysql-5.7.31-linux-glibc2.12-x86_64
* mysql-8.0.21-linux-glibc2.17-x86_64
* mariadb-10.5.6
configure --with-mysqli=/usr/local/$version/bin/mysql_config --with-pdo-mysql=/usr/local/$version
MySQL-8.0 removed my_bool
Some options where deprecated in mysql-8.0
MY_CHARSET_INFO used with exposed api mysql_get_character_set_info
rather than internal structures.
Add db2_execute() to the list of functions accessing the local
scope. Ideally the API wouldn't do that, but it seems most
pragmatic to address this on the opcache side at this point.
The "member" string here does not necessarily have a pre-calculated
hash value. In particular this is not the case if the class has no
properties.
Fixes oss-fuzz #25546.
A recent commit[1] which fixed a memory leak introduced a regression
regarding the formerly liberal handling of IP addresses to bind to. We
fix this by reverting that commit, and fix the memory leak where it
actually occurs. In other words, this fix is less intrusive than the
former fix.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=0b8c83f5936581942715d14883cdebddc18bad30>
Closes GH-6104.
Modules may have changed after restart which can cause dangling pointers from custom opcode handlers in the second-level cache files. This fix includes the installed module names and versions in the accel_system_id hash as entropy. Closes GH-5836
Quoting from the bug report:
> The domain names passed to getmxrr() do not contain a trailing dot.
> DNS lookups which do not find records will (depending on the local
> resolver config) try again by adding the local domain to the end of
> the searched host/domain. In many environments there's an mx record
> for any subdomain of the local domain and the MX query will return
> a hit. But the test expects no hit. So the test fails when checking
> that "qa.php.net" does not have an MX record in DNS. In our local
> environment the resolver falls back to also check qa.php.net.kippdata.de
> which does have an MX record. Using "qa.php.net." instead of "qa.php.net"
> should fix this for everyone.
Do not decrement the refcount before allocating the new string,
as the allocation operation may bail out and cause a use-after-free
lateron. We can only decrement the refcount once the allocation
has succeeded.
Fixes oss-fuzz #25384.
php_parse_url() is intended to support strings that are not zero
terminated. We can't use strcspn in the implementation.
As we have two uses of strcspn, add a helper.
Use the general zend_generator_throw_exception() helper for this.
Otherwise we don't handle the off-by-one opline correctly (should
we maybe just stop doing that?)
This is a followup to ad750c3bb6,
which fixed a different yield from exception handling problem that
happened to show up in the same test case from oss-fuzz #25321.
Now both issues should be fixed.
There is a deeper underlying issue here, in that the opcodes violate
VM write-fetch safety, but let's fix the infinite loop first.
This fixes oss-fuzz #25352.
This can happen if zend_call_function inserted a dummy frame,
and we already switched to the dummy frame in leave_helper,
and an exception is thrown during CV destruction.
Fixes oss-fuzz #25343.
We can't just remove the uses, we need to replace uses.
The test case only fails on master with SSA integrity violations,
but I believe the root issue also existed previously.
If we're accessing an uninitialized typed property and __get is
defined, don't perform a read_property callback, as __get is
supposed to have no effect on uninitialized typed properties.
Usually it doesn't, but by-reference assignments cannot be
performed through read_property.
I'm deleting the test for bug #80039 again, as it doesn't really
make sense anymore with this fix.
Added new flags that allow skipping param_evt(s) that are not used by drivers,
in a backwards and forward compatible manner. Updated the pgsql, mysql, sqlite
and oci drivers to properly use the new flags. I've left out pdo_dblib, which
doesn't have a param_hook, and pdo_firebird, which seems to be using
PARAM_EVT_NORMALIZE in a wrong context (param type vs event type).
Currently we only ever increment ifd_nesting_level, so this ends up
being a limit on the total number of IFD tags and we regularly get
bug reports of it being exceeded. I think the intention behind this
limit was to prevent recursion stack overflow, and for that we only
need to check actual recursive usage. I've implemented that here,
and dropped the nesting limit down to a smaller value
(which still passes our tests).
However, it seems that we do also need to have a total limit on
the number of tags, as we don't catch some instances of infinite
looping otherwise. Add this as a separate limit with a higher
value, that should hopefully be sufficient.
This is expected to fix a number of bugs:
https://bugs.php.net/bug.php?id=78083https://bugs.php.net/bug.php?id=78701https://bugs.php.net/bug.php?id=79907https://bugs.php.net/bug.php?id=80016
If the length is not -1, require it to be non-negative.
Using such lengths doesn't make sense (as only -1 is special-case
to read in chunks, anything else will end up doing a huge upfront
allocation) and can lead to string allocation overflow.
A similar check is already in place for file_get_contents(). That
one does not allow -1 (and uses null instead), but this function
is explicitly specified to accept -1, so stick to that behavior.
As of PHP 7.4.0, exceptions are allowed to be thrown from inside
`__toString()` methods; we have to cater to that, and catch these
exceptions early.
Closes GH-6042
`ITypeInfo_GetIDsOfNames()` is supposed to fail with `E_NOTIMPL` for
out-of-process servers, thus we should not remove the already available
typeinfo of the object in this case.
We also properly free the `byref_vals`.
`tolower()` returns an `int`, so we must not convert to `char` which
may be `signed` and as such may be subject to overflow (actually,
implementation defined behavior).
Closes GH-6007
PDO driver constructors are throwing PdoException without setting
errorInfo, so create a new reusable function that throws exceptions
for PDO and will also set the errorInfo. Use this function in
pdo_mysql, pdo_sqlite, and pdo_pgsql.
Different manufacturer models may come with a
different endianness (motorola/intel) format. In
order to avoid a big refactor and a gigantic lookup
table, this commit simply attempts to switch the
endianness and proceed when values are acceptable.
Closes GH-5849.
op_arrays can be shared on two levels: Either the op_array is
completely shared, or it is distinct but shares all members
(apart from static_variables).
The the op_array is distinct, we need to make sure to properly
initialize the MAP_PTR structures.
Whether the type library is cached is actually irrelevant here; what
matters is that the symbols are imported, and since these are not
cached, we have to import them for every request. And we cannot cache
the symbols, because the import depends on the current codepage, but
the codepage is a `PHP_INI_ALL` setting.
We must not call `zend_list_delete()` in resource closer functions
exposed to userland, because decreasing the refcount there leads to
use-after-free scenarios. In this case, commit 4a42fbb worked for
typical use-cases where `xml_parser_free()` has been called exactly
once for the resource, because there is an internal zval (`->index`)
referencing the same resource which already increased the refcount by
one. However, when `xml_parser_free()` is called multiple times on the
same XML parser resource, the resource would be freed prematurely.
Instead we forcefully close the resource in `xml_parser_free()`. We
also could decrease the refcount of the resource there, but that would
require to call `xml_parser_free()` which is somewhat uncommon, and
would be particularly bad wrt. PHP 8 where that function is a NOP, and
as such doesn't have to be called. So we do no longer increase the
refcount of the resource when copying it to the internal zval, and let
the usualy refcounting semantics take care of the resource destruction.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=4a42fbbbc73aad7427aef5c89974d1833636e082>
Move the FREE_OP for op_data out of the zend_binary_assign_op_dim_slow()
slow path, so it can be used by the other error path as well. This
makes ASSIGN_DIM_OP structurally more similar to ASSIGN_DIM.
These systems has two versions of the iovec interface dependent on
compiler flags passed, the legacy version causing little build issue.
Closes GH-5939.
Okay, looks like ai_canonname does not get set on macos even if
AI_CANONNAME is specified, so canonicalize this in the other
direction instead and unset ai_canonname if it is present.
This test is doing something really dubious. There's a race
condition here that would kill some poor process that happens
to start at just the wrong time.
Instead of storing the mapping base address and the address of
`execute_ex()` in a separate file in the temporary folder, we store
them right at the beginning of the memory mapping.
This reverts commit e1f6ab3388, reversing
changes made to e0ebe56ebf.
There are obviously issues with running tests in parallel, maybe
related to the cache ID. This needs to be investigated. Revert for
now.
If the CTRL-C event can't be sent to the child for whatever reason, the
test will never terminate, because `proc_close()` waits for an infinite
amount of time. Therefore, we `proc_terminate()` the child instead,
after explicitly closing the pipes.
Instead of storing the mapping base address and the address of
`execute_ex()` in a separate file in the temporary folder, we store
them right at the beginning of the memory mapping.
The file extension to mime type mapping *must* not depend on the file
extension's case for case-insensitive file systems, and *should* not
for case-sensitive file systems.
It does not make sense to make assumptions about `PHP_CONFIG_FILE_PATH`
during build time, since that value is never used during run time on
Windows. Since there is no `--with-config-file-path` on Windows
either, we define `PHP_CONFIG_FILE_PATH` as `""`.
This test fails occasionally due to timing issues, because the session
file may have been unlinked by the first `session_start()`'s GC. We
adapt the test expectation to this reality.
This only leaks at the end of the process, so per se not an issue, but
the leak is caught by MSVC's CRT leak checker, so we better properly
clean up to avoid false positives.
We must not mix multibyte and wide character strings in the
`COAUTHIDENTITY` structure. Using wide character strings throughout
would have the advantage that the remote connection can be established
regardless of the code page of the server, but that would more likely
break BC, so we just drop the wide character string conversion of the
username.
Similar to what is done for ReflectionType itself, copy the
type name stored inside ReflectionProperty. Also make sure the
type field is always initialized for dynamic properties.
This is a non-issue in PHP 8, because we store a pointer to the
property_info there, rather than a copy.
We mark symlink_link_linkinfo_is_link_error2.phpt as XFAIL on Windows
ZTS. Several Windows API file system functions ignore trailing spaces
in absolute filenames after the final directory separator, which causes
`link(' ', $link)` to actually call `CreateHardLink()` which then
fails, because linking folders is not supported. However, with NTS
builds (as well as on other systems), the $target is found to not
exist, so the function fails without actually attempting to create the
link. This needs further investigation.
When performing an RW modification of an array offset, the undefined
offset warning may call an error handler / OB callback, which may
destroy the array we're supposed to change. Detect this by temporarily
incrementing the reference count. If we find that the array has been
modified/destroyed in the meantime, we do nothing -- the execution
model here would be that the modification has happened on the destroyed
version of the array.
In the interest of avoiding side-effects during dumping, I'm
replacing the value with a <constant ast> string instead of
performing an update constant operation.
We modify _basic1.phpt so it runs on Windows as well. The other test
cases hit the issue that `readlink()` fails normally for regular files,
but succeeds on Windows[1]. Therefore, we split these tests, but still
fix the skip reasons.
[1] <http://svn.php.net/viewvc?view=revision&revision=350097>
Most of these have been skipped on Windows for no good reason (`lstat`
is available there as of PHP 4). Several others would only fail,
because the `blksize` and `blocks` elements are always `-1` on Windows,
which can easily be fixed by using `%i` format specifiers instead of
`%d`.
Fixes a use-after-free encountered in Symfony's SecurityBundle.
I don't have a reproducer for this, and believe the issue can only
occur if we leak an iterator (the leak is a separate issue).
We should not free the generator iterator here, because we do not
own it. The code that fetched the iterator is responsible for
releasing it. In the rare case where we do hit this code-path,
we cause a use-after-free.
A `BSTR` is similar to a `zend_string`; it stores the length of the
string just before the actual string, and thus the string may contain
NUL bytes. However, `php_com_olestring_to_string()` is supposed to
deal with arbitrary `OLECHAR*`s which may not be `BSTR`s, so we
introduce `php_com_bstr_to_string()` and use it for the only case where
we actually have to deal with `BSTR`s which may contain NUL bytes.
Contrary to `php_com_olestring_to_string()` we return a `zend_string`,
so we can save the re-allocation when converting to a `zval`.
We also cater to `php_com_string_to_olestring()` not being binary safe,
with basically the same fix we did for `php_com_olestring_to_string()`.
`ReflectionClass` allows reading of the values of private and protected
constants, and also to get private and protected static methods.
Therefore getting the values of private and protected static properties
is also permissible, especially since `::getStaticProperties()` already
allows to do so.
We also allow ::setStaticPropertyValue() to modify private and
protected properties, because otherwise this method is useless, as
modifying public properties can be done directly.
`atol()` returns a `long` which is not the same as `zend_long` on
LLP64; we use `ZEND_ATOL()` instead.
There is no need for a new test case, since filesize_large.phpt already
tests for that behavior; unfortunately, the FTP test suite relies on
`pcntl_fork()` and therefore cannot be run on Windows.
Check if data would overlap and also add an assert. Previous
implementations didn't have this issue, as the direct assignment was
used.
Signed-off-by: Anatol Belski <ab@php.net>
These were XFAILed due to a bug in the log implementation that
caused intermittent failures. However, this issue is supposed to
be resolved in the meantime, so try dropping the XFAIL marker.
The `security_level` stream option is only available as of OpenSSL
1.1.0, so we only set it for these versions. Older OpenSSL versions
do not have security levels at all.
This migrates all the tests using ext/openssl/tests/streams_crypto_method.pem
to the certificate generator, so we can easily adjust needed parameters.
In particular, this makes the cert security level 2 compatible.
However, we still need to downgrade security_level to 1 in a number
of tests, because they are testing TLS < 1.2 connections.
Saw a spurious failure from this one on azure macos, presumably
the process got interrupted in the middle and waited for more than
one second to resume.
After looking a bit more closely, this test doesn't actually test
what bug #48187 reported, because there is no DateTime::diff()
anywhere to be found. This test was also added speculatively,
because the root cause was never diagnosed, and the problems seems
to have resolved itself at some point.
As such, I'm simply dropping this test, rather than figuring out
how to make it more robust.
This makes the generated certificates compatible with security
level 2, which is apparently the default on Ubuntu 20.04.
Unfortunately this does not fix all tests, because some are using
pre-generated certificates.
Even if the length of a maker note does not match our expectations
(either because the maker note is corrupted, or because our
expectations do not quite match reality), there is no need to let
parsing fail; we can still go on parsing the other meta information.
Exception should be thrown before the db handle is destroyed.
The backtrace excerpt
==26628== Invalid read of size 4
==26628== at 0x53C49E3: sqlite3_errmsg (in /usr/lib64/libsqlite3.so.0.8.6)
==26628== by 0x38C4E9: zim_sqlite3_open (sqlite3.c:142)
==26628== by 0x8977BF: ZEND_DO_FCALL_SPEC_RETVAL_UNUSED_HANDLER (zend_vm_execute.h:1618)
==26628== by 0x8F801E: execute_ex (zend_vm_execute.h:53824)
==26628== by 0x8FC0BB: zend_execute (zend_vm_execute.h:57920)
==26628== by 0x828F54: zend_execute_scripts (zend.c:1672)
==26628== by 0x793C2C: php_execute_script (main.c:2621)
==26628== by 0x8FEA44: do_cli (php_cli.c:964)
==26628== by 0x8FF9DC: main (php_cli.c:1359)
Signed-off-by: Anatol Belski <ab@php.net>
The output normalization of bless_tests.php only detected absolute Unix
filenames; we extend this for absolute Windows filenames, regardless of
the platform we're running on (tests may have been run on Windows, but
bless_tests.php may be run from WSL or a Linux VM, for instance).
In module startup stage, we should not initiliaze
EG(modified_ini_directives) as it use zend MM, the zend MM will be
restart at the end of modules startup stage,
by say "partial", because this issue still exists if altering ZEND_USER
inis, we should add a zend_ini_deactive at the end of modules startup
stage, but it brings some new cost, and I think no one would do things
like that
The `timercmp()` manpage[1] points out that some systems have a broken
implementation which does not support `>=`. This is definitely the
case for the Windows SDK, which only supports `<` and `>`.
[1] <https://linux.die.net/man/3/timercmp>
If the current character is a line break character, it cannot be a tab
or space character, so we would always fail with an invalid sequence
error. Obviously, these `scan_stat == 4` conditions are meant to be
exclusive.
Furthermore, if `in_pp == NULL || in_left_p == NULL` is true, we hit a
segfault if we are not returning right away. Obviously, the additional
constraints don't make sense, so we remove them.
Extend configure.ac to accept PHP_UNAME as env variable to set the value of the
PHP_UNAME define in a reproducible manner. This allows distributions to set a
fixed value for php_uname and keep the default behaviour if PHP_UNAME is not
set.
Motivation: https://reproducible-builds.org/
Closes GH-5671.
Currently ./configure --enable-phar --program-suffix=7.4 will
result in binaries named php7.4 and phar but should instead
result in php7.4 and phar7.4
Closes GH-5650.
As its name suggests, `sqlite3_data_count` returns the number of
columns in the current row of the result set; we are interested in the
number of columns regardless of the current row, so we have to use
`sqlite3_column_count` instead.
As of PHP 7.3.0, `sapi_cli_single_write()` is supposed to return `< 0`
on failure, but `fwrite()` returns a `size_t`, and signals error by
setting the stream's error indicator. We have to cater to that.
* Properly initialize PHPDBG_G(watch_tmp)
Otherwise that may cause segfaults in ZTS builds.
* Deactivate potentially remaining watchpoints after REPL
Otherwise the memory could still be protected, resulting in segfaults
during shutdown.
* NULL zend_handlers_table after freeing
As of commit 4130fe4[1], the `zend_handlers_table` is explicitly
freed in the `zend_vm_dtor()`. Since phpdbg (and maybe some other
SAPIs) may restart the engine afterwards, we have to make sure that
the table is also NULLed.
* Only set context option if there is a context
In other words, we must not follow the null pointer.
* Cater to file handles without attached console
File handles do not necessarily have an attached console (for
instance, pipes do not), in which case `GetConsoleScreenBufferInfo()`
fails. In this case we set a default value (`40`) for lines like on
other systems.
[1] <http://git.php.net/?p=php-src.git;a=commit;h=4130fe437a5db7ead1444d3748bd0fbad9829cb2>
On startup, PHP deliberately changes the floating point control word to
enforce binary64 format for the calculations for best consistency
across platforms. However, this is unnessary for x86_64 architectures,
because in this case SSE instructions are used by default, and there is
no good reason to pass `-mfpmath=i387` or such.
Therefore, we can skip the modification, which has the benefit that
system libraries are free to work in the mode of their liking.
I decided to null out EG(exception) early here, which means only
the exception from the dtor / ref assign is preserved, and the
previous exception is not chained in. This is more robust, and
I don't think this situation is common enough to be bothered about
the precise behavior.
There was some confusion going on here regarding the original
value vs the copied value.
I've dropped the needs_copy variable, because this code is not
inlined, so it would always be true anyway.
What we need to do is perform a move-assignment of the copied
value (in which case we don't care about performing the assignment
before destroying garbage), and destroying the original value
for the VAR/TMP cases. This is a bit complicated by the fact that
references are passed in via a separate ref variable, so we can't
just ptr_dtor the original variable.
On startup, PHP deliberately changes the floating point control word to
enforce binary64 format for the calculations for best consistency
across platforms. However, this is unnessary when compiling under
`__SSE__`, because in this case the x87 instructions are not used.
Therefore, we can skip the modification, which has the benefit that
system libraries are free to work in the mode of their liking.
The color resolution is expected in bits 4-6 of the packed fields byte
of the logical screen descriptor (byte 10 of the GIF data stream),
according to the specification[1], section 18.
[1] <https://www.w3.org/Graphics/GIF/spec-gif89a.txt>
If the class is already linked, we need to serialize and
unserialize INDIRECTed static properties. Normally these would
be set up when copying from cache.
Since the member is not used in `OnUpdateEol()` that's not really an
issue, but still it's confusing to apparently have two INI settings
targeting the same member.
* 'PHP-7.4' of git.php.net:/php-src:
Fix#79557: extension_dir = ./ext now use current directory for base
Fix#79596: MySQL FLOAT truncates to int some locales
[ci skip] Fix NEWS
For some reason, `ImageLoad()` fails to load images with a relative
path starting with `.\` or `./`. We work around this issue by
stripping those leading characters.
We add the missing release dates, the NEWS regarding the latest CVE
fixes, and move the entry for bug #79536 to 7.4.7 because it didn't
make it into 7.4.6.
lcov is emitting several errors for generated regex files that have no code
coverage data. The fix is to add the files to the lcov exlusion list.
This is not an issue for CI because it uses gcovr to generate code coverage.
The errors:
Processing ext/date/lib/parse_date.gcda
geninfo: WARNING: could not open /home/code/vendor/php/php-src/parse_date.re
geninfo: WARNING: could not open /home/code/vendor/php/php-src/<stdout>
geninfo: WARNING: some exclusion markers may be ignored
Processing ext/date/lib/parse_tz.gcda
Processing ext/date/lib/tm2unixtime.gcda
Processing ext/date/lib/parse_iso_intervals.gcda
geninfo: WARNING: could not open /home/code/vendor/php/php-src/<stdout>
geninfo: WARNING: could not open /home/code/vendor/php/php-src/parse_iso_intervals.re
geninfo: WARNING: some exclusion markers may be ignored
...
genhtml: ERROR: cannot read /home/code/vendor/php/php-src/parse_date.re
Processing file /home/code/vendor/php/php-src/parse_date.re
make: *** [Makefile:443: lcov-html] Error 2
Closes GH-5568.
To solve bug #70886, the test uses random keys to prevent collisions;
however, this is not guaranteed, and as such it may even collide with
other tests in the shmop test suite. The proper solution would be to
use a single key (which could be randomly generated), but to actually
`shmop_close()` after each `shmop_delete()`. This would, however, not
work on Windows due to bug #65987. Therefore we use three different
keys for now.
* PHP-7.3:
Fix#78876: Long variables cause OOM and temp files are not cleaned
Fix#78875: Long filenames cause OOM and temp files are not cleaned
Update NEWS for 7.2.31
Update CREDITS for PHP 7.2.30
Update NEWS for PHP 7.2.30
* PHP-7.2:
Fix#78876: Long variables cause OOM and temp files are not cleaned
Fix#78875: Long filenames cause OOM and temp files are not cleaned
Update NEWS for 7.2.31
Update CREDITS for PHP 7.2.30
Update NEWS for PHP 7.2.30
We must not cast `size_t` to `int` (unless the `size_t` value is
guaranteed to be less than or equal to `INT_MAX`). In this case we can
declare `array_len` as `size_t` in the first place.
We must not attempt to access arbitrary union members when retrieving
debug info, because that may not be valid. Therefore we do no longer
dereference pointer types inside of unions, but report their address as
string in `%p` format instead.
This is a funny one. I discovered that lstat_stat_variation10.phpt was failing every
now and again when the PHP test suite was run on my dev PC. The output from the failing
test showed that the atime (access time) of the directory created in the test was changing
between these lines:
$old_stat = stat($dirname);
clearstatcache();
sleep(1);
var_dump( is_dir($dirname) );
$new_stat = stat($dirname);
Could is_dir() be accessing the directory and changing the atime? strace showed that is_dir
was only issuing a single stat() syscall. Could stat() change the atime? No, no, that would
just be perverse. Nobody would be stupid enough to implement the kernel in that way.
Checked the kernel source, found that the function called when atime needs to be updated
appears to be touch_atime(). Broke out the BCC kernel tracing tools and ran this one
while running the flaky test case in a loop:
sudo trace -I<kernel src dir>/include/linux/path.h -I<same>/include/linux/dcache.h 'touch_atime(struct path *path) "%s", path->dentry->d_name.name'
Inspecting the results showed that something called "git_thread" was occcasionally updating
the atime on the directory in question!! What on earth...???
The PID shown by trace revealed that this was a background thread for Sublime Text 3.
Sublime now has git integration and shows when there are untracked or modified files. It
seems that it uses a background thread to regularly scan the project directory and look
for new and modified files. This was causing the atime to change.
Even though other developers may not be running ST3, there are any number of reasons why
a background process might recurse through various directories and could cause the atime
to change unexpectedly. Therefore, update the test case so it doesn't fail in such cases.
Closes GH-5553.
We map the POSIX semantics of `IPC_PRIVATE` by creating unnamed file
mapping objects on Windows. While that is not particularly useful for
ext/shmop, which is the only bundled extension which uses `shmget()`,
it may be useful for external extensions.
On Windows, reusing/sharing of OPcache instances with different
configuration is not necessarily supported, so we have to make that it
does not happen for the clean scripts, by using `$orig_ini_settings`
instead of `$clean_params`.
* 'PHP-7.4' of git.php.net:/php-src:
Fix#79532: sizeof off_t can be wrong
Make 045.phpt busy wait
Revert "Fix #79065: DOM classes do not expose properties to Reflection"
Bump version
Fix#79065: DOM classes do not expose properties to Reflection
Fix#79470: PHP incompatible with 3rd party file system on demand
We have to actually determine the proper `SIZEOF_OFF_T`.
Interestingly, it is `4` on Windows x64.
We also have to prevent the redefinition in pg_config.h. The clean
solution would likely be to not include pg_config.h at all, but that's
out of scope for BC reasons for now.
The timeout is only real-time based on Windows. Make this use
a busy wait loop instead. If hard_timeout is broken, this will
fail with a run-tests enforced timeout instead.
Loaded 100 of 1028 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Derick Rethans